Contents

1 Introduction

The InTAD analysis is focused on the processing of generated object that combines all input datasets. Required input data is the following:

Further explained example of performing the analysis procedure is based on H3K27ac data reflecting activity of enhancers in medulloblastoma brain tumour descrbied in the manuscript from C.Y.Lin, S.Erkek et al., Nature, 2016.

This dataset includes normalized enhancer signals obtained from H3K27ac ChIP-seq data and RNA-seq gene expression RPKM counts from 25 medulloblastoma samples. The test subset is extracted from a selected region inside chromosome 15. Additionally, the coordinates for enhancers and genes along with specific sample annotation are provided.

The analysis starts from preparing and loading the data. Here is the overview of integrated input test data, that can serve as a useful example describing supported input formats:

library(InTAD)
# normalized enhancer signals table
enhSel[1:3,1:3]
##                              MB176      MB95       MB40
## chr15:26003055-26004347  0.1936792 0.8005544 -0.4829619
## chr15:26007354-26009802  0.6658638 1.3044401  0.7630649
## chr15:26012427-26015263 -1.3077170 1.0948566 -0.6673826
# enhancer signal genomic coordinates 
as.data.frame(enhSelGR[1:3])
##   seqnames    start      end width strand
## 1    chr15 26003055 26004347  1293      *
## 2    chr15 26007354 26009802  2449      *
## 3    chr15 26012427 26015263  2837      *
# gene expression normalized counts
rpkmCountsSel[1:3,1:3]
##                   MB176     MB95 MB40
## ENSG00000215567.4     0 0.000000    0
## ENSG00000201241.1     0 0.000000    0
## ENSG00000258463.1     0 4.183154    0
# gene coordiantes
as.data.frame(txsSel[1:3])
##   seqnames    start      end width strand           gene_id    gene_name
## 1    chr15 20083769 20093074  9306      + ENSG00000215567.4 RP11-79C23.1
## 2    chr15 20088867 20088969   103      + ENSG00000201241.1    RNU6-978P
## 3    chr15 20104587 20104812   226      + ENSG00000258463.1 RP11-173D3.3
##    gene_type
## 1 pseudogene
## 2      snRNA
## 3 pseudogene
# additional sample info data.frame
head(mbAnnData)
##       Subgroup Age Gender    Histology M.Stage
## MB176      WNT   9      F      Classic      M0
## MB95    Group3   3      M      Classic      M0
## MB40    Group4   3      M      Classic      M0
## MB37       SHH   1      F Desmoplastic      M0
## MB38    Group4   6      M Desmoplastic      M0
## MB28       SHH   1      M Desmoplastic      M0

Importantly, there are specific requriements for the input datasets. The names of samples should match in signals and gene expression datasets.

summary(colnames(rpkmCountsSel) == colnames(enhSel))
##    Mode    TRUE 
## logical      25

Next, the genomic regions should be provided for each signal as well as for each gene.

# compare number of signal regions and in the input table
length(enhSelGR) == nrow(enhSel)
## [1] TRUE

The genomic regions reflecting the gene coordinates must include “gene_id” and “gene_name” marks. These are typical GTF format markers. One more mark “gene_type” is also useful to perform filtering of gene expression matrix.

All the requirements are checked during the generation of the InTADSig object. Main part of this object is MultiAssayExperiment subset that combines signals and gene expression. Specific annotation information about samples can be also included for further control and visualization. In provided example for medulloblastoma samples annotation contains various aspects such as tumour subgroup, age, gender, etc.

inTadSig <- newSigInTAD(enhSel, enhSelGR, rpkmCountsSel, txsSel,mbAnnData)
## Created signals and genes object for 25 samples

The created object contains MultiAssayExperiment that includes both signals and gene expression data.

inTadSig
## S4 InTADSig object
## Num samples: 25 
## Num signals: 65 
## Num genes:  2080

During the main object generation there are also available special options to activate parallel computing based on usage of R multi-thread librares
and log2 adjustment for gene expression. The generated data subsets can be accessed using specific call functions on the object i.e. signals or exprs.

Notably, the main object can be also loaded from the text files representing the input data using function loadSigInTAD. Refer to the documetation of this function for more details.

2 Main data analysis

Before starting the analysis it’s possible to adjust gene expression limits using function filterGeneExpr. This function provides parameters to control minimum gene expression and type. There is additionally a special option to compute gene expression distribution based on usage of mclust package in order to find suitable minimum gene expression cut limit. Here’s example how to activate this:

# filter gene expression
inTadSig <- filterGeneExpr(inTadSig, checkExprDistr = TRUE)
## Initial result: 2080 genes
## Gene expression cut value: 1.79430355142865
## Filtered result: 671 genes

The analysis starts from the combination of signals and genes inside the TADs. Since the TADs are known to be stable across various cell types, it’s possible to use already known TADs obtained from IMR90 cells using HiC technology (Dixon et al 2012). The human IMR90 TADs regions object is integrated into the package.

# IMR90 hg19 TADs
head(tadGR)
## GRanges object with 6 ranges and 0 metadata columns:
##                        seqnames          ranges strand
##                           <Rle>       <IRanges>  <Rle>
##    chr1:770137-1250137     chr1  770137-1250137      *
##   chr1:1250137-1850140     chr1 1250137-1850140      *
##   chr1:1850140-2330140     chr1 1850140-2330140      *
##   chr1:2330140-3650140     chr1 2330140-3650140      *
##   chr1:4660140-6077413     chr1 4660140-6077413      *
##   chr1:6077413-6277413     chr1 6077413-6277413      *
##   -------
##   seqinfo: 23 sequences from an unspecified genome; no seqlengths

However, since the variance is actually observed between TAD calling methods (i.e. described in detailed review by Rola Dali and Mathieu Blanchette, NAR 2017 ), novel obtained TADs can be also applied for the analysis. The requried format: GRanges object.

Composition of genes and signals in TADs is performed using function combineInTAD that has several options. By default, it marks the signal belonging to the TAD by largest overlap and also takes into account genes that are not overlaping the TADs by connecting them to the closest TAD. This can be sensetive strategy since some genomic regions can be missed due to the limits of input HiC data and variance of existing TAD calling methods.

# combine signals and genes in TADs
inTadSig <- combineInTAD(inTadSig, tadGR)
## Combined 520 signal-gene pairs in TADs

Final step is the correlation analysis. Various options are avialble for this function i.e. correlation method, computation of q-value to control the evidence strength and visualization of connection proportions. This last option allows to show differences in gene and signal regulations.

par(mfrow=c(1,2)) # option to combine plots in the graph
# perform correlation anlaysis
corData <- findCorrelation(inTadSig,plot.proportions = TRUE)

The result data.frame has a special format. It includes each signal, TAD, gene and correlation information.

head(corData,5)
##                    peakid                     tad               gene
## 1 chr15:26003055-26004347 chr15:25728907-27128907 ENSG00000114062.13
## 2 chr15:26003055-26004347 chr15:25728907-27128907  ENSG00000261529.1
## 3 chr15:26003055-26004347 chr15:25728907-27128907  ENSG00000206190.7
## 4 chr15:26003055-26004347 chr15:25728907-27128907  ENSG00000166206.9
## 5 chr15:26003055-26004347 chr15:25728907-27128907  ENSG00000235518.2
##            name         cor    pvalue corRank
## 1         UBE3A -0.04096321 0.8458537       8
## 2 RP13-487P22.1  0.04206502 0.8417581       6
## 3        ATP10A  0.09644601 0.6465118       5
## 4        GABRB3  0.02421908 0.9085147       7
## 5    AC011196.3  0.13491773 0.5202224       3

Further filtering of this result data can be performed by adjusting p-value and correlation effect limits (i.e. p-val < 0.01, positive correlation only).

3 Visualization

The package provides post-analysis visualization function: the specific signal and gene can be selected for correlation plot generation. Here’s example of verified medulllobastoma Group3-specifc enhancer assoicated gene GABRA5 lying in the same TAD as the enhancer, but not close to the gene:

# example enhancer in correlation with GABRA5
cID <- "chr15:26372163-26398073" 
selCorData <- corData[corData$peakid == cID, ]
selCorData[ selCorData$name == "GABRA5", ] 
##                      peakid                     tad              gene   name
## 230 chr15:26372163-26398073 chr15:25728907-27128907 ENSG00000186297.7 GABRA5
##          cor       pvalue corRank
## 230 0.878531 7.724306e-09       1

For the plot generation it is required to provide the signal id and gene name:

plotCorrelation(inTadSig, cID, "GABRA5",
                xLabel = "RPKM gene expr log2",
                yLabel = "H3K27ac enrichment log2", 
                colByPhenotype = "Subgroup")

Note that in the visualization it’s also possible to mark the colours representing the samples using option colByPhenotype based on the sample annotation information included in the generation of the main object. In the provided example medulloblastma tumour subgroups are marked.

Specific genomic region of interest can be also visualised to observe the variance and impact of TADs using special function that works on result data.frame obtained from function findCorrelation. The resulting plot provides the location of signals in X-axis and genes in Y-axis. Each point reflects the correlation stength based on p-value: -log10(P-val). This visualization strategy was introduced in the study by S. Waszak et al, Cell, 2015 focused on investigation of chromatin architecture in human cells.

By default only detected TADs with signals inside are visualized, but it is also possible to include all avaialble TAD regions using special option. Here’s the example plot covering the whole chromosome 15 region used in the test dataset:

plotCorAcrossRef(inTadSig,corData,
                 targetRegion = GRanges("chr15:25000000-28000000"), 
                 tads = tadGR)

One more option of this function allows to activaite representation of postive correlation values from 0 to 1 instead of strength.

plotCorAcrossRef(inTadSig,corData,
                 targetRegion = GRanges("chr15:25000000-28000000"), 
                 showCorVals = TRUE, tads = tadGR)

It’s also possible to focus on the connections by ignoring the signal/gene locations and focusing only on correlation values by adjusting for symmetery. This is typical approach used for HiC contact data visualization in such tools as for example JuiceBox. This can be activate by using the corresponding option:

plotCorAcrossRef(inTadSig,corData,
                 targetRegion = GRanges("chr15:25000000-28000000"), 
                 showCorVals = TRUE, symmetric = TRUE, tads = tadGR)

These visualization strategies allow to investigate the impact of TADs.

Additional documentation is available for each function via standard R help.

4 Session info

Here is the output of sessionInfo() on the system on which this document was compiled:

## R version 3.5.2 (2018-12-20)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 16.04.5 LTS
## 
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.8-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.8-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] parallel  stats4    stats     graphics  grDevices utils     datasets 
## [8] methods   base     
## 
## other attached packages:
##  [1] InTAD_1.2.3                 MultiAssayExperiment_1.8.3 
##  [3] SummarizedExperiment_1.12.0 DelayedArray_0.8.0         
##  [5] BiocParallel_1.16.6         matrixStats_0.54.0         
##  [7] Biobase_2.42.0              GenomicRanges_1.34.0       
##  [9] GenomeInfoDb_1.18.2         IRanges_2.16.0             
## [11] S4Vectors_0.20.1            BiocGenerics_0.28.0        
## [13] BiocStyle_2.10.0           
## 
## loaded via a namespace (and not attached):
##  [1] qvalue_2.14.1            tidyselect_0.2.5        
##  [3] xfun_0.5                 purrr_0.3.0             
##  [5] reshape2_1.4.3           splines_3.5.2           
##  [7] lattice_0.20-38          colorspace_1.4-0        
##  [9] htmltools_0.3.6          rtracklayer_1.42.1      
## [11] yaml_2.2.0               XML_3.98-1.17           
## [13] rlang_0.3.1              pillar_1.3.1            
## [15] ggpubr_0.2               glue_1.3.0              
## [17] GenomeInfoDbData_1.2.0   plyr_1.8.4              
## [19] stringr_1.4.0            zlibbioc_1.28.0         
## [21] Biostrings_2.50.2        munsell_0.5.0           
## [23] gtable_0.2.0             evaluate_0.13           
## [25] labeling_0.3             knitr_1.21              
## [27] Rcpp_1.0.0               scales_1.0.0            
## [29] BiocManager_1.30.4       XVector_0.22.0          
## [31] Rsamtools_1.34.1         ggplot2_3.1.0           
## [33] digest_0.6.18            stringi_1.3.1           
## [35] bookdown_0.9             dplyr_0.8.0.1           
## [37] grid_3.5.2               tools_3.5.2             
## [39] bitops_1.0-6             magrittr_1.5            
## [41] RCurl_1.95-4.11          lazyeval_0.2.1          
## [43] tibble_2.0.1             crayon_1.3.4            
## [45] pkgconfig_2.0.2          Matrix_1.2-15           
## [47] assertthat_0.2.0         rmarkdown_1.11          
## [49] R6_2.4.0                 mclust_5.4.2            
## [51] GenomicAlignments_1.18.1 compiler_3.5.2

5 References

Dali, R. and Blanchette, M., 2017. A critical assessment of topologically associating domain prediction tools. Nucleic acids research, 45(6), pp.2994-3005.

Dixon, J.R., Selvaraj, S., Yue, F., Kim, A., Li, Y., Shen, Y., Hu, M., Liu, J.S. and Ren, B., 2012. Topological domains in mammalian genomes identified by analysis of chromatin interactions. Nature, 485(7398), p.376.

Lin, C.Y., Erkek, S., Tong, Y., Yin, L., Federation, A.J., Zapatka, M., Haldipur, P., Kawauchi, D., Risch, T., Warnatz, H.J. and Worst, B.C., 2016. Active medulloblastoma enhancers reveal subgroup-specific cellular origins. Nature, 530(7588), p.57.

Waszak, S.M., Delaneau, O., Gschwind, A.R., Kilpinen, H., Raghav, S.K., Witwicki, R.M., Orioli, A., Wiederkehr, M., Panousis, N.I., Yurovsky, A. and Romano-Palumbo, L., 2015. Population variation and genetic control of modular chromatin architecture in humans. Cell, 162(5)