Differential abundance testing with Milo - Mouse gastrulation example
1 May 2024
Package
miloR 2.0.0
library(miloR)
library(SingleCellExperiment)
library(scater)
library(scran)
library(dplyr)
library(patchwork)
library(MouseGastrulationData)1 Load data
For this vignette we will use the mouse gastrulation single-cell data from Pijuan-Sala et al. 2019. The dataset can be downloaded as a SingleCellExperiment object from the MouseGastrulationData package on Bioconductor. To make computations faster, here we will download just a subset of samples, 4 samples at stage E7 and 4 samples at stage E7.5.
This dataset has already been pre-processed and contains a pca.corrected dimensionality reduction, which was built after batch correction using fastMNN.
select_samples <- c(2, 3, 6, 4, #15,
# 19,
10, 14#, 20 #30
#31, 32
)
embryo_data = EmbryoAtlasData(samples = select_samples)
embryo_data## class: SingleCellExperiment
## dim: 29452 7558
## metadata(0):
## assays(1): counts
## rownames(29452): ENSMUSG00000051951 ENSMUSG00000089699 ...
## ENSMUSG00000096730 ENSMUSG00000095742
## rowData names(2): ENSEMBL SYMBOL
## colnames(7558): cell_361 cell_362 ... cell_29013 cell_29014
## colData names(17): cell barcode ... colour sizeFactor
## reducedDimNames(2): pca.corrected umap
## mainExpName: NULL
## altExpNames(0):2 Visualize the data
We recompute the UMAP embedding for this subset of cells to visualize the data.
embryo_data <- embryo_data[,apply(reducedDim(embryo_data, "pca.corrected"), 1, function(x) !all(is.na(x)))]
embryo_data <- runUMAP(embryo_data, dimred = "pca.corrected", name = 'umap')
plotReducedDim(embryo_data, colour_by="stage", dimred = "umap") 
We will test for significant differences in abundance of cells between these stages of development, and the associated gene signatures.
3 Differential abundance testing
3.1 Create a Milo object
For differential abundance analysis on graph neighbourhoods we first construct a Milo object. This extends the SingleCellExperiment class to store information about neighbourhoods on the KNN graph.
embryo_milo <- Milo(embryo_data)
embryo_milo## class: Milo
## dim: 29452 6875
## metadata(0):
## assays(1): counts
## rownames(29452): ENSMUSG00000051951 ENSMUSG00000089699 ...
## ENSMUSG00000096730 ENSMUSG00000095742
## rowData names(2): ENSEMBL SYMBOL
## colnames(6875): cell_361 cell_362 ... cell_29013 cell_29014
## colData names(17): cell barcode ... colour sizeFactor
## reducedDimNames(2): pca.corrected umap
## mainExpName: NULL
## altExpNames(0):
## nhoods dimensions(2): 1 1
## nhoodCounts dimensions(2): 1 1
## nhoodDistances dimension(1): 0
## graph names(0):
## nhoodIndex names(1): 0
## nhoodExpression dimension(2): 1 1
## nhoodReducedDim names(0):
## nhoodGraph names(0):
## nhoodAdjacency dimension(2): 1 13.2 Construct KNN graph
We need to add the KNN graph to the Milo object. This is stored in the graph slot, in igraph format. The miloR package includes functionality to build and store the graph from the PCA dimensions stored in the reducedDim slot. In this case, we specify that we want to build the graph from the MNN corrected PCA dimensions.
For graph building you need to define a few parameters:
d: the number of reduced dimensions to use for KNN refinement. We recommend using the same \(d\) used for KNN graph building, or to select PCs by inspecting the scree plot.k: this affects the power of DA testing, since we need to have enough cells from each sample represented in a neighbourhood to estimate the variance between replicates. On the other side, increasing \(k\) too much might lead to over-smoothing. We suggest to start by using the same value for \(k\) used for KNN graph building for clustering and UMAP visualization. We will later use some heuristics to evaluate whether the value of \(k\) should be increased.
embryo_milo <- buildGraph(embryo_milo, k = 30, d = 30, reduced.dim = "pca.corrected")Alternatively, one can add a precomputed KNN graph (for example constructed with Seurat or scanpy) to the graph slot using the adjacency matrix, through the helper function buildFromAdjacency.
3.3 Defining representative neighbourhoods on the KNN graph
We define the neighbourhood of a cell, the index, as the group of cells connected by an edge in the KNN graph to the index cell. For efficiency, we don’t test for DA in the neighbourhood of every cell, but we sample as indices a subset of representative cells, using a KNN sampling algorithm used by Gut et al. 2015.
As well as \(d\) and \(k\), for sampling we need to define a few additional parameters:
prop: the proportion of cells to randomly sample to start with. We suggest usingprop=0.1for datasets of less than 30k cells. For bigger datasets usingprop=0.05should be sufficient (and makes computation faster).refined: indicates whether you want to use the sampling refinement algorithm, or just pick cells at random. The default and recommended way to go is to use refinement. The only situation in which you might consider usingrandominstead, is if you have batch corrected your data with a graph based correction algorithm, such as BBKNN, but the results of DA testing will be suboptimal.
embryo_milo <- makeNhoods(embryo_milo, prop = 0.1, k = 30, d=30, refined = TRUE, reduced_dims = "pca.corrected")Once we have defined neighbourhoods, we plot the distribution of neighbourhood sizes (i.e. how many cells form each neighbourhood) to evaluate whether the value of \(k\) used for graph building was appropriate. We can check this out using the plotNhoodSizeHist function.
As a rule of thumb we want to have an average neighbourhood size over 5 x N_samples. If the mean is lower, or if the distribution is
plotNhoodSizeHist(embryo_milo)
3.4 Counting cells in neighbourhoods
Milo leverages the variation in cell numbers between replicates for the same experimental condition to test for differential abundance. Therefore we have to count how many cells from each sample are in each neighbourhood. We need to use the cell metadata and specify which column contains the sample information.
embryo_milo <- countCells(embryo_milo, meta.data = as.data.frame(colData(embryo_milo)), sample="sample")This adds to the Milo object a \(n \times m\) matrix, where \(n\) is the number of neighbourhoods and \(m\) is the number of experimental samples. Values indicate the number of cells from each sample counted in a neighbourhood. This count matrix will be used for DA testing.
head(nhoodCounts(embryo_milo))## 6 x 6 sparse Matrix of class "dgCMatrix"
## 2 3 6 4 10 14
## 1 . . 19 2 62 13
## 2 1 . 21 . 64 15
## 3 . . 17 1 60 13
## 4 . . 22 3 83 11
## 5 . . 6 . 99 6
## 6 2 3 26 4 . .3.5 Defining experimental design
Now we are all set to test for differential abundance in neighbourhoods. We implement this hypothesis testing in a generalized linear model (GLM) framework, specifically using the Negative Binomial GLM implementation in edgeR.
We first need to think about our experimental design. The design matrix should match each sample to the experimental condition of interest for DA testing. In this case, we want to detect DA between embryonic stages, stored in the stage column of the dataset colData. We also include the sequencing.batch column in the design matrix. This represents a known technical covariate that we want to account for in DA testing.
embryo_design <- data.frame(colData(embryo_milo))[,c("sample", "stage", "sequencing.batch")]
## Convert batch info from integer to factor
embryo_design$sequencing.batch <- as.factor(embryo_design$sequencing.batch)
embryo_design <- distinct(embryo_design)
rownames(embryo_design) <- embryo_design$sample
embryo_design## sample stage sequencing.batch
## 2 2 E7.5 1
## 3 3 E7.5 1
## 6 6 E7.5 1
## 4 4 E7.5 1
## 10 10 E7.0 1
## 14 14 E7.0 23.6 Computing neighbourhood connectivity
Milo uses an adaptation of the Spatial FDR correction introduced by cydar, where we correct p-values accounting for the amount of overlap between neighbourhoods. Specifically, each hypothesis test P-value is weighted by the reciprocal of the kth nearest neighbour distance. To use this statistic we first need to store the distances between nearest neighbors in the Milo object. This is done by the calcNhoodDistance function
(N.B. this step is the most time consuming of the analysis workflow and might take a couple of minutes for large datasets).
embryo_milo <- calcNhoodDistance(embryo_milo, d=30, reduced.dim = "pca.corrected")3.7 Testing
Now we can do the DA test, explicitly defining our experimental design. In this case, we want to test for differences between experimental stages, while accounting for the variability between technical batches (You can find more info on how to use formulas to define a testing design in R here)
da_results <- testNhoods(embryo_milo, design = ~ sequencing.batch + stage, design.df = embryo_design, reduced.dim="pca.corrected")
head(da_results)## logFC logCPM F PValue FDR Nhood SpatialFDR
## 1 -4.287998 11.99046 26.237254 3.456984e-07 1.143855e-06 1 1.030733e-06
## 2 -4.387249 12.04024 27.711410 1.636710e-07 6.037044e-07 2 5.336860e-07
## 3 -4.508896 11.92637 28.648719 1.018505e-07 3.996949e-07 3 3.522620e-07
## 4 -4.434757 12.25008 29.026918 8.412736e-08 3.350205e-07 4 2.955593e-07
## 5 -6.610287 12.22163 50.545907 1.881002e-12 8.464509e-11 5 6.587006e-11
## 6 5.976495 10.35138 7.739349 5.478230e-03 9.409173e-03 6 9.438189e-03This calculates a Fold-change and corrected P-value for each neighbourhood, which indicates whether there is significant differential abundance between developmental stages. The main statistics we consider here are:
logFC: indicates the log-Fold change in cell numbers between samples from E7.5 and samples from E7.0PValue: reports P-values before FDR correctionSpatialFDR: reports P-values corrected for multiple testing accounting for overlap between neighbourhoods
da_results %>%
arrange(SpatialFDR) %>%
head() ## logFC logCPM F PValue FDR Nhood SpatialFDR
## 15 -7.803126 12.22317 56.69822 9.254034e-14 1.590661e-11 15 1.232394e-11
## 105 -8.455623 12.51775 56.41245 1.063918e-13 1.590661e-11 105 1.232394e-11
## 337 -9.233096 11.72111 57.05201 7.786822e-14 1.590661e-11 337 1.232394e-11
## 35 -9.321762 12.04151 55.37327 1.767401e-13 1.590661e-11 35 1.271931e-11
## 146 -9.138621 11.75762 55.82790 1.415380e-13 1.590661e-11 146 1.271931e-11
## 166 -9.484251 12.71392 54.27300 3.026729e-13 2.270047e-11 166 1.831519e-114 Inspecting DA testing results
We can start inspecting the results of our DA analysis from a couple of standard diagnostic plots. We first inspect the distribution of uncorrected P values, to verify that the test was balanced.
ggplot(da_results, aes(PValue)) + geom_histogram(bins=50)
Then we visualize the test results with a volcano plot (remember that each point here represents a neighbourhood, not a cell).
ggplot(da_results, aes(logFC, -log10(SpatialFDR))) +
geom_point() +
geom_hline(yintercept = 1) ## Mark significance threshold (10% FDR)
Looks like we have detected several neighbourhoods were there is a significant difference in cell abundances between developmental stages.
To visualize DA results relating them to the embedding of single cells, we can build an abstracted graph of neighbourhoods that we can superimpose on the single-cell embedding. Here each node represents a neighbourhood, while edges indicate how many cells two neighbourhoods have in common. Here the layout of nodes is determined by the position of the index cell in the UMAP embedding of all single-cells. The neighbourhoods displaying significant DA are colored by their log-Fold Change.
embryo_milo <- buildNhoodGraph(embryo_milo)
## Plot single-cell UMAP
umap_pl <- plotReducedDim(embryo_milo, dimred = "umap", colour_by="stage", text_by = "celltype",
text_size = 3, point_size=0.5) +
guides(fill="none")
## Plot neighbourhood graph
nh_graph_pl <- plotNhoodGraphDA(embryo_milo, da_results, layout="umap",alpha=0.1)
umap_pl + nh_graph_pl +
plot_layout(guides="collect")## Warning: ggrepel: 4 unlabeled data points (too many overlaps). Consider
## increasing max.overlaps
We might also be interested in visualizing whether DA is particularly evident in certain cell types. To do this, we assign a cell type label to each neighbourhood by finding the most abundant cell type within cells in each neighbourhood. We can label neighbourhoods in the results data.frame using the function annotateNhoods. This also saves the fraction of cells harbouring the label.
da_results <- annotateNhoods(embryo_milo, da_results, coldata_col = "celltype")
head(da_results)## logFC logCPM F PValue FDR Nhood SpatialFDR
## 1 -4.287998 11.99046 26.237254 3.456984e-07 1.143855e-06 1 1.030733e-06
## 2 -4.387249 12.04024 27.711410 1.636710e-07 6.037044e-07 2 5.336860e-07
## 3 -4.508896 11.92637 28.648719 1.018505e-07 3.996949e-07 3 3.522620e-07
## 4 -4.434757 12.25008 29.026918 8.412736e-08 3.350205e-07 4 2.955593e-07
## 5 -6.610287 12.22163 50.545907 1.881002e-12 8.464509e-11 5 6.587006e-11
## 6 5.976495 10.35138 7.739349 5.478230e-03 9.409173e-03 6 9.438189e-03
## celltype celltype_fraction
## 1 Primitive Streak 0.9479167
## 2 ExE ectoderm 1.0000000
## 3 ExE ectoderm 1.0000000
## 4 Epiblast 0.9579832
## 5 Epiblast 1.0000000
## 6 Notochord 0.6571429While neighbourhoods tend to be homogeneous, we can define a threshold for celltype_fraction to exclude neighbourhoods that are a mix of cell types.
ggplot(da_results, aes(celltype_fraction)) + geom_histogram(bins=50)
da_results$celltype <- ifelse(da_results$celltype_fraction < 0.7, "Mixed", da_results$celltype)Now we can visualize the distribution of DA Fold Changes in different cell types
plotDAbeeswarm(da_results, group.by = "celltype")
This is already quite informative: we can see that certain early development cell types, such as epiblast and primitive streak, are enriched in the earliest time stage, while others are enriched later in development, such as ectoderm cells. Interestingly, we also see plenty of DA neighbourhood with a mixed label. This could indicate that transitional states show changes in abundance in time.
5 Finding markers of DA populations
Once you have found your neighbourhoods showindg significant DA between conditions, you might want to find gene signatures specific to the cells in those neighbourhoods. The function findNhoodGroupMarkers runs a one-VS-all differential gene expression test to identify marker genes for a group of neighbourhoods of interest. Before running this function you will need to define your neighbourhood groups depending on your biological question, that need to be stored as a NhoodGroup column in the da_results data.frame.
5.0.1 Custom grouping
In a case where all the DA neighbourhoods seem to belong to the same region of the graph, you might just want to test the significant DA neighbourhoods with the same logFC against all the rest (N.B. for illustration purposes, here I am testing on a randomly selected set of 10 genes).
## Add log normalized count to Milo object
embryo_milo <- logNormCounts(embryo_milo)
da_results$NhoodGroup <- as.numeric(da_results$SpatialFDR < 0.1 & da_results$logFC < 0)
da_nhood_markers <- findNhoodGroupMarkers(embryo_milo, da_results, subset.row = rownames(embryo_milo)[1:10])## Warning: Zero sample variances detected, have been offset away from zero
## Warning: Zero sample variances detected, have been offset away from zerohead(da_nhood_markers)## GeneID logFC_1 adj.P.Val_1 logFC_0 adj.P.Val_0
## 1 ENSMUSG00000025900 -0.0002237107 1.0000000000 0.0002237107 1.0000000000
## 2 ENSMUSG00000025902 -0.0931404288 0.0003779055 0.0931404288 0.0003779055
## 3 ENSMUSG00000025903 0.0557172808 0.0154066243 -0.0557172808 0.0154066243
## 4 ENSMUSG00000033813 0.0172015013 0.7998932008 -0.0172015013 0.7998932008
## 5 ENSMUSG00000033845 0.0879325066 0.0003779055 -0.0879325066 0.0003779055
## 6 ENSMUSG00000051951 0.0000000000 1.0000000000 0.0000000000 1.0000000000For this analysis we recommend aggregating the neighbourhood expression profiles by experimental samples (the same used for DA testing), by setting aggregate.samples=TRUE. This way single-cells will not be considered as “replicates” during DGE testing, and dispersion will be estimated between true biological replicates. Like so:
da_nhood_markers <- findNhoodGroupMarkers(embryo_milo, da_results, subset.row = rownames(embryo_milo)[1:10],
aggregate.samples = TRUE, sample_col = "sample")## Warning: Zero sample variances detected, have been offset away from zero
## Warning: Zero sample variances detected, have been offset away from zerohead(da_nhood_markers)## GeneID logFC_1 adj.P.Val_1 logFC_0 adj.P.Val_0
## 1 ENSMUSG00000025900 -0.002282339 1 0.002282339 1
## 2 ENSMUSG00000025902 0.050824116 1 -0.050824116 1
## 3 ENSMUSG00000025903 -0.056595888 1 0.056595888 1
## 4 ENSMUSG00000033813 -0.010252833 1 0.010252833 1
## 5 ENSMUSG00000033845 0.158446008 1 -0.158446008 1
## 6 ENSMUSG00000051951 0.000000000 1 0.000000000 1(Notice the difference in p values)
5.1 Automatic grouping of neighbourhoods
In many cases, such as this example, DA neighbourhoods are found in different areas of the KNN graph, and grouping together all significant DA populations might not be ideal, as they might include cells of very different celltypes. For this kind of scenario, we have implemented a neighbourhood function that uses community detection to partition neighbourhoods into groups on the basis of (1) the number of shared cells between 2 neighbourhoods; (2) the direction of fold-change for DA neighbourhoods; (3) the difference in fold change.
## Run buildNhoodGraph to store nhood adjacency matrix
embryo_milo <- buildNhoodGraph(embryo_milo)
## Find groups
da_results <- groupNhoods(embryo_milo, da_results, max.lfc.delta = 10)
head(da_results)## logFC logCPM F PValue FDR Nhood SpatialFDR
## 1 -4.287998 11.99046 26.237254 3.456984e-07 1.143855e-06 1 1.030733e-06
## 2 -4.387249 12.04024 27.711410 1.636710e-07 6.037044e-07 2 5.336860e-07
## 3 -4.508896 11.92637 28.648719 1.018505e-07 3.996949e-07 3 3.522620e-07
## 4 -4.434757 12.25008 29.026918 8.412736e-08 3.350205e-07 4 2.955593e-07
## 5 -6.610287 12.22163 50.545907 1.881002e-12 8.464509e-11 5 6.587006e-11
## 6 5.976495 10.35138 7.739349 5.478230e-03 9.409173e-03 6 9.438189e-03
## celltype celltype_fraction NhoodGroup
## 1 Primitive Streak 0.9479167 1
## 2 ExE ectoderm 1.0000000 2
## 3 ExE ectoderm 1.0000000 2
## 4 Epiblast 0.9579832 3
## 5 Epiblast 1.0000000 3
## 6 Mixed 0.6571429 4Let’s have a look at the detected groups
plotNhoodGroups(embryo_milo, da_results, layout="umap") 
plotDAbeeswarm(da_results, "NhoodGroup")
We can easily check how changing the grouping parameters changes the groups we obtain, starting with the LFC delta by plotting with different values of max.lfc.delta
(not executed here).
# code not run - uncomment to run.
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 1) , group.by = "NhoodGroup") + ggtitle("max LFC delta=1")
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 2) , group.by = "NhoodGroup") + ggtitle("max LFC delta=2")
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 3) , group.by = "NhoodGroup") + ggtitle("max LFC delta=3")…and we can do the same for the minimum overlap between neighbourhoods… (code not executed).
# code not run - uncomment to run.
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 5, overlap=1) , group.by = "NhoodGroup") + ggtitle("overlap=5")
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 5, overlap=5) , group.by = "NhoodGroup") + ggtitle("overlap=10")
# plotDAbeeswarm(groupNhoods(embryo_milo, da_results, max.lfc.delta = 5, overlap=10) , group.by = "NhoodGroup") + ggtitle("overlap=20")In these examples we settle for overlap=5 and max.lfc.delta=5, as we need at least 2 neighbourhoods assigned to each group.
set.seed(42)
da_results <- groupNhoods(embryo_milo, da_results, max.lfc.delta = 10, overlap=1)
plotNhoodGroups(embryo_milo, da_results, layout="umap")
plotDAbeeswarm(da_results, group.by = "NhoodGroup")
5.2 Finding gene signatures for neighbourhoods
Once we have grouped neighbourhoods using groupNhoods we are now all set to identifying gene signatures between neighbourhood groups.
Let’s restrict the testing to highly variable genes in this case
## Exclude zero counts genes
keep.rows <- rowSums(logcounts(embryo_milo)) != 0
embryo_milo <- embryo_milo[keep.rows, ]
## Find HVGs
set.seed(101)
dec <- modelGeneVar(embryo_milo)
hvgs <- getTopHVGs(dec, n=2000)
# this vignette randomly fails to identify HVGs for some reason
if(!length(hvgs)){
set.seed(42)
dec <- modelGeneVar(embryo_milo)
hvgs <- getTopHVGs(dec, n=2000)
}
head(hvgs)## [1] "ENSMUSG00000032083" "ENSMUSG00000095180" "ENSMUSG00000061808"
## [4] "ENSMUSG00000002985" "ENSMUSG00000024990" "ENSMUSG00000024391"We run findNhoodGroupMarkers to test for one-vs-all differential gene expression for each neighbourhood group
set.seed(42)
nhood_markers <- findNhoodGroupMarkers(embryo_milo, da_results, subset.row = hvgs,
aggregate.samples = TRUE, sample_col = "sample")
head(nhood_markers)## GeneID logFC_1 adj.P.Val_1 logFC_2 adj.P.Val_2 logFC_3
## 1 ENSMUSG00000000031 -1.9498733 0.04536553 1.1014317 0.21562219 -1.90828546
## 2 ENSMUSG00000000078 -0.3440811 0.19711020 -0.1312041 0.58383715 -0.20824158
## 3 ENSMUSG00000000088 -0.4323264 0.19918009 -0.2200316 0.46010996 -0.34310990
## 4 ENSMUSG00000000125 0.2930105 0.01015925 -0.1615843 0.15211345 -0.13677142
## 5 ENSMUSG00000000149 -0.1101877 0.30547385 -0.1428491 0.16483855 -0.07649314
## 6 ENSMUSG00000000184 0.9195230 0.11073053 -0.9576637 0.05104947 0.01208822
## adj.P.Val_3 logFC_4 adj.P.Val_4 logFC_5 adj.P.Val_5 logFC_6
## 1 0.02841894 -0.88428496 4.308213e-01 3.05758118 7.094659e-07 1.04863232
## 2 0.35639674 0.10665764 7.386653e-01 0.01837353 9.278848e-01 0.18776821
## 3 0.24949461 -0.38901188 3.147965e-01 0.74504722 1.196390e-03 0.30764726
## 4 0.22975447 0.12548239 3.792715e-01 0.02160298 8.311689e-01 -0.11223670
## 5 0.43501953 -0.04173594 7.667383e-01 0.26067573 1.021755e-03 0.09008038
## 6 0.98066789 1.68462330 9.104609e-05 -0.96767928 2.153758e-02 -0.33976971
## adj.P.Val_6 logFC_7 adj.P.Val_7
## 1 0.2651018 -1.53668444 0.418682373
## 2 0.4773618 1.14744702 0.000853138
## 3 0.3488897 0.91774880 0.088807327
## 4 0.3705730 -0.05156581 0.852360978
## 5 0.4368704 0.05480465 0.827311957
## 6 0.5573844 -0.65055626 0.582621470Let’s check out the markers for group 5 for example
gr5_markers <- nhood_markers[c("logFC_5", "adj.P.Val_5")]
colnames(gr5_markers) <- c("logFC", "adj.P.Val")
head(gr5_markers[order(gr5_markers$adj.P.Val), ])## logFC adj.P.Val
## 1739 1.4995219 2.155509e-30
## 1255 1.2295319 3.536485e-28
## 1495 2.7407881 8.492137e-28
## 1123 2.6869800 3.289906e-26
## 775 0.8495975 4.551925e-26
## 1985 1.2447298 1.378201e-24If you already know you are interested only in the markers for group 2, you might want to test just 8-VS-all using the subset.groups parameter:
nhood_markers <- findNhoodGroupMarkers(embryo_milo, da_results, subset.row = hvgs,
aggregate.samples = TRUE, sample_col = "sample",
subset.groups = c("5")
)
head(nhood_markers)## logFC_5 adj.P.Val_5 GeneID
## ENSMUSG00000059412 1.4995219 2.155509e-30 ENSMUSG00000059412
## ENSMUSG00000035041 1.2295319 3.536485e-28 ENSMUSG00000035041
## ENSMUSG00000043501 2.7407881 8.492137e-28 ENSMUSG00000043501
## ENSMUSG00000031883 2.6869800 3.289906e-26 ENSMUSG00000031883
## ENSMUSG00000027173 0.8495975 4.551925e-26 ENSMUSG00000027173
## ENSMUSG00000096546 1.2447298 1.378201e-24 ENSMUSG00000096546You might also want to compare a subset of neighbourhoods between each other. You can specify the neighbourhoods to use for testing by setting the parameter subset.nhoods.
For example, you might want to compare just one pair of neighbourhood groups against each other:
nhood_markers <- findNhoodGroupMarkers(embryo_milo, da_results, subset.row = hvgs,
subset.nhoods = da_results$NhoodGroup %in% c('5','6'),
aggregate.samples = TRUE, sample_col = "sample")## Warning: Zero sample variances detected, have been offset away from zero
## Warning: Zero sample variances detected, have been offset away from zerohead(nhood_markers)## GeneID logFC_5 adj.P.Val_5 logFC_6 adj.P.Val_6
## 1 ENSMUSG00000000031 1.7421995 0.0001234822 -1.7421995 0.0001234822
## 2 ENSMUSG00000000078 -0.3709890 0.0997462986 0.3709890 0.0997462986
## 3 ENSMUSG00000000088 0.1610599 0.4863319892 -0.1610599 0.4863319892
## 4 ENSMUSG00000000125 0.1306836 0.0005862789 -0.1306836 0.0005862789
## 5 ENSMUSG00000000149 0.1436047 0.0627172154 -0.1436047 0.0627172154
## 6 ENSMUSG00000000184 -0.3049315 0.0132515544 0.3049315 0.0132515544or you might use subset.nhoods to exclude singleton neighbourhoods, or to subset to the neighbourhoods that show significant DA.
5.3 Visualize detected markers
Lets select marker genes for group 10 at FDR 1% and log-fold-Change > 1.
ggplot(nhood_markers, aes(logFC_5, -log10(adj.P.Val_5 ))) +
geom_point(alpha=0.5, size=0.5) +
geom_hline(yintercept = 3)
markers <- nhood_markers$GeneID[nhood_markers$adj.P.Val_5 < 0.01 & nhood_markers$logFC_5 > 0]We can visualize the expression in neighbourhoods using plotNhoodExpressionGroups.
set.seed(42)
plotNhoodExpressionGroups(embryo_milo, da_results, features=intersect(rownames(embryo_milo), markers[1:10]),
subset.nhoods = da_results$NhoodGroup %in% c('6','5'),
scale=TRUE,
grid.space = "fixed")## Warning in plotNhoodExpressionGroups(embryo_milo, da_results, features =
## intersect(rownames(embryo_milo), : Nothing in nhoodExpression(x): computing for
## requested features...
5.4 DGE testing within a group
In some cases you might want to test for differential expression between cells in different conditions within the same neighbourhood group. You can do that using testDiffExp:
dge_6 <- testDiffExp(embryo_milo, da_results, design = ~ stage, meta.data = data.frame(colData(embryo_milo)),
subset.row = rownames(embryo_milo)[1:5], subset.nhoods=da_results$NhoodGroup=="6")
dge_6## $`6`
## logFC AveExpr t P.Value adj.P.Val
## ENSMUSG00000033845 -0.2580051 2.491143 -2.521673 0.01233795 0.06168977
## ENSMUSG00000025902 0.1976221 2.290738 1.498247 0.13540237 0.33850593
## ENSMUSG00000051951 0.0000000 0.000000 0.000000 1.00000000 1.00000000
## ENSMUSG00000102343 0.0000000 0.000000 0.000000 1.00000000 1.00000000
## ENSMUSG00000025900 0.0000000 0.000000 0.000000 1.00000000 1.00000000
## B Nhood.Group
## ENSMUSG00000033845 -6.965418 6
## ENSMUSG00000025902 -8.994280 6
## ENSMUSG00000051951 -10.116064 6
## ENSMUSG00000102343 -10.116064 6
## ENSMUSG00000025900 -10.116064 6Session Info
sessionInfo()## R version 4.4.0 beta (2024-04-15 r86425)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 22.04.4 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.19-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] MouseGastrulationData_1.17.1 SpatialExperiment_1.14.0
## [3] MouseThymusAgeing_1.11.0 patchwork_1.2.0
## [5] dplyr_1.1.4 scran_1.32.0
## [7] scater_1.32.0 ggplot2_3.5.1
## [9] scuttle_1.14.0 SingleCellExperiment_1.26.0
## [11] SummarizedExperiment_1.34.0 Biobase_2.64.0
## [13] GenomicRanges_1.56.0 GenomeInfoDb_1.40.0
## [15] IRanges_2.38.0 S4Vectors_0.42.0
## [17] BiocGenerics_0.50.0 MatrixGenerics_1.16.0
## [19] matrixStats_1.3.0 miloR_2.0.0
## [21] edgeR_4.2.0 limma_3.60.0
## [23] BiocStyle_2.32.0
##
## loaded via a namespace (and not attached):
## [1] RColorBrewer_1.1-3 jsonlite_1.8.8
## [3] magrittr_2.0.3 magick_2.8.3
## [5] ggbeeswarm_0.7.2 farver_2.1.1
## [7] rmarkdown_2.26 zlibbioc_1.50.0
## [9] vctrs_0.6.5 memoise_2.0.1
## [11] DelayedMatrixStats_1.26.0 tinytex_0.50
## [13] htmltools_0.5.8.1 S4Arrays_1.4.0
## [15] AnnotationHub_3.12.0 curl_5.2.1
## [17] BiocNeighbors_1.22.0 SparseArray_1.4.0
## [19] sass_0.4.9 bslib_0.7.0
## [21] cachem_1.0.8 igraph_2.0.3
## [23] mime_0.12 lifecycle_1.0.4
## [25] pkgconfig_2.0.3 rsvd_1.0.5
## [27] Matrix_1.7-0 R6_2.5.1
## [29] fastmap_1.1.1 GenomeInfoDbData_1.2.12
## [31] digest_0.6.35 numDeriv_2016.8-1.1
## [33] colorspace_2.1-0 AnnotationDbi_1.66.0
## [35] dqrng_0.3.2 irlba_2.3.5.1
## [37] ExperimentHub_2.12.0 RSQLite_2.3.6
## [39] beachmat_2.20.0 labeling_0.4.3
## [41] filelock_1.0.3 fansi_1.0.6
## [43] httr_1.4.7 polyclip_1.10-6
## [45] abind_1.4-5 compiler_4.4.0
## [47] bit64_4.0.5 withr_3.0.0
## [49] BiocParallel_1.38.0 viridis_0.6.5
## [51] DBI_1.2.2 highr_0.10
## [53] ggforce_0.4.2 MASS_7.3-60.2
## [55] rappdirs_0.3.3 DelayedArray_0.30.0
## [57] rjson_0.2.21 bluster_1.14.0
## [59] gtools_3.9.5 tools_4.4.0
## [61] vipor_0.4.7 beeswarm_0.4.0
## [63] glue_1.7.0 grid_4.4.0
## [65] cluster_2.1.6 generics_0.1.3
## [67] gtable_0.3.5 tidyr_1.3.1
## [69] BiocSingular_1.20.0 tidygraph_1.3.1
## [71] ScaledMatrix_1.12.0 metapod_1.12.0
## [73] utf8_1.2.4 XVector_0.44.0
## [75] RcppAnnoy_0.0.22 ggrepel_0.9.5
## [77] BiocVersion_3.19.1 pillar_1.9.0
## [79] stringr_1.5.1 BumpyMatrix_1.12.0
## [81] splines_4.4.0 tweenr_2.0.3
## [83] BiocFileCache_2.12.0 lattice_0.22-6
## [85] FNN_1.1.4 bit_4.0.5
## [87] tidyselect_1.2.1 locfit_1.5-9.9
## [89] Biostrings_2.72.0 knitr_1.46
## [91] gridExtra_2.3 bookdown_0.39
## [93] xfun_0.43 graphlayouts_1.1.1
## [95] statmod_1.5.0 stringi_1.8.3
## [97] UCSC.utils_1.0.0 yaml_2.3.8
## [99] evaluate_0.23 codetools_0.2-20
## [101] ggraph_2.2.1 tibble_3.2.1
## [103] BiocManager_1.30.22 cli_3.6.2
## [105] uwot_0.2.2 munsell_0.5.1
## [107] jquerylib_0.1.4 Rcpp_1.0.12
## [109] dbplyr_2.5.0 png_0.1-8
## [111] parallel_4.4.0 blob_1.2.4
## [113] sparseMatrixStats_1.16.0 viridisLite_0.4.2
## [115] scales_1.3.0 purrr_1.0.2
## [117] crayon_1.5.2 rlang_1.1.3
## [119] cowplot_1.1.3 KEGGREST_1.44.0