Machine learning pitfalls
Date last modified: 2020-11-07
Contents
1 About This Vignette
In this vignette, we want to explore two pitfalls for machine learning analysis
that can lead to overly optimistic performance estimates.
When setting up cross-validation workflows, the main objective is usually to
estimate how well a trained model would perform on external data, which is
specifically important when considering biomarker discovery. However, more
complex workflows involving feature selection or time-course data can be
challenging to setup correctly. Incorrect workflows in which information leaks
from the test to the training data can lead to overfitting and poor
generalization to external datasets.
Here, we focus on supervised feature selection and the naive splitting of
dependent data.
1.1 Setup
First, we load the packages needed to perform the analyses.
library("tidyverse")
library("SIAMCAT")2 Supervised Feature Selection
Supervised feature selection means that the label information is taken into
account before the cross-validation split. Within this procedure, the features
are selected if they are associated with the label (for example after
differential abundance testing), using the complete dataset for the calculation
of feature association and leaving no data aside for unbiased model
evaluation.
A correct way to perform feature selection would be to nest the selection step
into the cross-validation procedure. That means that the calculation of
feature association is performed for each training fold separately.
2.1 Load the Data
As an example, we are going to use two datasets of colorectal cancer (CRC)
which are available through the curatedMetagenomicData package.
Since the model trainig procedure takes a long time, this vignette is not
evaluated upon build of the package, but if you execute the code chunks for
yourself, you should get similar results.
library("curatedMetagenomicData")First, we are going to load the dataset from Thomas et al as training dataset.
x <- 'ThomasAM_2018a.metaphlan_bugs_list.stool'
feat.t <- curatedMetagenomicData(x=x, dryrun=FALSE)
feat.t <- feat.t[[x]]@assayData$exprs
# clean up metaphlan profiles to contain only species-level abundances
feat.t <- feat.t[grep(x=rownames(feat.t), pattern='s__'),]
feat.t <- feat.t[grep(x=rownames(feat.t),pattern='t__', invert = TRUE),]
stopifnot(all(colSums(feat.t) != 0))
feat.t <- t(t(feat.t)/100)As an external dataset, we are going to use the data from Zeller et al..
x <- 'ZellerG_2014.metaphlan_bugs_list.stool'
feat.z <- curatedMetagenomicData(x=x, dryrun=FALSE)
feat.z <- feat.z[[x]]@assayData$exprs
# clean up metaphlan profiles to contain only species-level abundances
feat.z <- feat.z[grep(x=rownames(feat.z), pattern='s__'),]
feat.z <- feat.z[grep(x=rownames(feat.z),pattern='t__', invert = TRUE),]
stopifnot(all(colSums(feat.z) != 0))
feat.z <- t(t(feat.z)/100)We can also extract the corresponding metadata from the combined_metadata
object which is part of the curatedMetagenomicData package.
meta.t <- combined_metadata %>%
filter(dataset_name == 'ThomasAM_2018a') %>%
filter(study_condition %in% c('control', 'CRC'))
rownames(meta.t) <- meta.t$sampleID
meta.z <- combined_metadata %>%
filter(dataset_name == 'ZellerG_2014') %>%
filter(study_condition %in% c('control', 'CRC'))
rownames(meta.z) <- meta.z$sampleIDThe MetaPhlAn2 profiler used for the profiles outputs only species which are
present in the dataset. Therefore, we can have the case that there are species
in the matrix for ThomasAM_2018 which are not present in the matrix for
ZellerG_2014 and vice verse. In order to use them as training and external
test set for SIAMCAT, we have to first make sure that the set of
features for both datasets overlap completely (see also the Holdout Testing
with SIAMCAT vignette).
species.union <- union(rownames(feat.t), rownames(feat.z))
# add Zeller_2014-only species to the Thomas_2018 matrix
add.species <- setdiff(species.union, rownames(feat.t))
feat.t <- rbind(feat.t,
matrix(0, nrow=length(add.species), ncol=ncol(feat.t),
dimnames = list(add.species, colnames(feat.t))))
# add Thomas_2018-only species to the Zeller_2014 matrix
add.species <- setdiff(species.union, rownames(feat.z))
feat.z <- rbind(feat.z,
matrix(0, nrow=length(add.species), ncol=ncol(feat.z),
dimnames = list(add.species, colnames(feat.z))))Now, we are ready to start the model training process. For this, we chose three different feature selection cutoffs and prepare a tibble to hold the results:
fs.cutoff <- c(20, 100, 250)
auroc.all <- tibble(cutoff=character(0), type=character(0),
study.test=character(0), AUC=double(0))2.2 Train Model without Feature Selection
First, we will train a model without any feature selection, using all the
available features. We add it to the results matrix twice (both with correct
and incorrect) for easier plotting later.
sc.obj.t <- siamcat(feat=feat.t, meta=meta.t,
label='study_condition', case='CRC')
sc.obj.t <- filter.features(sc.obj.t, filter.method = 'prevalence',
cutoff = 0.01)
sc.obj.t <- normalize.features(sc.obj.t, norm.method = 'log.std',
norm.param=list(log.n0=1e-05, sd.min.q=0))
sc.obj.t <- create.data.split(sc.obj.t,
num.folds = 10, num.resample = 10)
sc.obj.t <- train.model(sc.obj.t, method='lasso')
sc.obj.t <- make.predictions(sc.obj.t)
sc.obj.t <- evaluate.predictions(sc.obj.t)
auroc.all <- auroc.all %>%
add_row(cutoff='full', type='correct',
study.test='Thomas_2018',
AUC=as.numeric(sc.obj.t@eval_data$auroc)) %>%
add_row(cutoff='full', type='incorrect', study.test='Thomas_2018',
AUC=as.numeric(sc.obj.t@eval_data$auroc)) We then also apply the model to the external dataset and record the generalization to another dataset:
sc.obj.z <- siamcat(feat=feat.z, meta=meta.z,
label='study_condition', case='CRC')
sc.obj.z <- make.predictions(sc.obj.t, sc.obj.z)
sc.obj.z <- evaluate.predictions(sc.obj.z)
auroc.all <- auroc.all %>%
add_row(cutoff='full', type='correct',
study.test='Zeller_2014',
AUC=as.numeric(sc.obj.z@eval_data$auroc)) %>%
add_row(cutoff='full', type='incorrect',
study.test='Zeller_2014',
AUC=as.numeric(sc.obj.z@eval_data$auroc)) 2.3 Incorrect Procedure: Train with Supervised Feature Selection
For the incorrect feature selection procedure, we can test the features for differential abundance, using the complete dataset, and then chose the top associated features.
sc.obj.t <- check.associations(sc.obj.t, detect.lim = 1e-05,
fn.plot = 'assoc_plot.pdf')
mat.assoc <- associations(sc.obj.t)
mat.assoc$species <- rownames(mat.assoc)
# sort by p-value
mat.assoc <- mat.assoc %>% as_tibble() %>% arrange(p.val)Based on the P values from the check.association function, we now
chose X number of features on which to train the model.
for (x in fs.cutoff){
# select x number of features based on p-value ranking
feat.train.red <- feat.t[mat.assoc %>%
slice(seq_len(x)) %>%
pull(species),]
sc.obj.t.fs <- siamcat(feat=feat.train.red, meta=meta.t,
label='study_condition', case='CRC')
# normalize the features without filtering
sc.obj.t.fs <- normalize.features(sc.obj.t.fs, norm.method = 'log.std',
norm.param=list(log.n0=1e-05,sd.min.q=0),feature.type = 'original')
# take the same cross validation split as before
data_split(sc.obj.t.fs) <- data_split(sc.obj.t)
# train
sc.obj.t.fs <- train.model(sc.obj.t.fs, method = 'lasso')
# make predictions
sc.obj.t.fs <- make.predictions(sc.obj.t.fs)
# evaluate predictions and record the result
sc.obj.t.fs <- evaluate.predictions(sc.obj.t.fs)
auroc.all <- auroc.all %>%
add_row(cutoff=as.character(x), type='incorrect',
study.test='Thomas_2018',
AUC=as.numeric(sc.obj.t.fs@eval_data$auroc))
# apply to the external dataset and record the result
sc.obj.z <- siamcat(feat=feat.z, meta=meta.z,
label='study_condition', case='CRC')
sc.obj.z <- make.predictions(sc.obj.t.fs, sc.obj.z)
sc.obj.z <- evaluate.predictions(sc.obj.z)
auroc.all <- auroc.all %>%
add_row(cutoff=as.character(x), type='incorrect',
study.test='Zeller_2014',
AUC=as.numeric(sc.obj.z@eval_data$auroc))
}2.4 Correct Procedure: Train with Nested Feature Selection
Feature selection can be performed correctly if it is nested within the
cross-validation procedure. We can do it using SIAMCAT by specifying the
perform.fs parameter in the train.model function.
for (x in fs.cutoff){
# train using the original SIAMCAT object
# with correct version of feature selection
sc.obj.t.fs <- train.model(sc.obj.t, method = 'lasso', perform.fs = TRUE,
param.fs = list(thres.fs = x,method.fs = "AUC",direction='absolute'))
# make predictions
sc.obj.t.fs <- make.predictions(sc.obj.t.fs)
# evaluate predictions and record the result
sc.obj.t.fs <- evaluate.predictions(sc.obj.t.fs)
auroc.all <- auroc.all %>%
add_row(cutoff=as.character(x), type='correct',
study.test='Thomas_2018',
AUC=as.numeric(sc.obj.t.fs@eval_data$auroc))
# apply to the external dataset and record the result
sc.obj.z <- siamcat(feat=feat.z, meta=meta.z,
label='study_condition', case='CRC')
sc.obj.z <- make.predictions(sc.obj.t.fs, sc.obj.z)
sc.obj.z <- evaluate.predictions(sc.obj.z)
auroc.all <- auroc.all %>%
add_row(cutoff=as.character(x), type='correct',
study.test='Zeller_2014',
AUC=as.numeric(sc.obj.z@eval_data$auroc))
}2.5 Plot the Results
Now, we can plot the resulting performance estimates for the cross-validation and the external validation as well:
auroc.all %>%
# facetting for plotting
mutate(split=case_when(study.test=="Thomas_2018"~
'Cross validation (Thomas 2018)',
TRUE~"External validation (Zeller 2014)")) %>%
# convert to factor to enforce ordering
mutate(cutoff=factor(cutoff, levels = c(fs.cutoff, 'full'))) %>%
ggplot(aes(x=cutoff, y=AUC, col=type)) +
geom_point() + geom_line(aes(group=type)) +
facet_grid(~split) +
scale_y_continuous(limits = c(0.5, 1), expand = c(0,0)) +
xlab('Features selected') +
ylab('AUROC') +
theme_bw() +
scale_colour_manual(values = c('correct'='blue', 'incorrect'='red'),
name='Feature selection procedure') +
theme(panel.grid.minor = element_blank(), legend.position = 'bottom')
As you can see, the incorrect feature selection procedure leads to inflated AUROC values but lower generalization to a truly external dataset, especially when very few features were selected. In contrast, the correct procedure gives a lower cross-validation results but a better estimation for how the model would perform on external data.
3 Naive Splitting of Dependent Data
Another issue in machine learning workflows can occur when samples are not
independent. For example, microbiome samples taken from the same individual
at different time points are usually more similar to each other than to samples
from other individuals. If these samples are split randomly in a naive
cross-validation procedure, the case could arise that samples from the same
individual will end up in the training and the test fold. In this case, the
model would learn to generalize across time-points for the same individual
compared to the desired model that should learn to distinguish the label
across individuals.
To avoid this issue, dependent measurements need to be blocked during
cross-validation, to ensure that samples within the same block will stay in the
same fold (for training and testing).
3.1 Load the Data
As an example, we are going to use several datasets of Crohn’s disease (CD)
which are available through the EMBL cluster. The data have already been
filtered and cleaned.
Since the model training would take again quite a long time, this part of the
vignette is not evaluated upon building of the package, but you should be
able to execute it yourself.
data.loc <- 'https://zenodo.org/api/files/d81e429c-870f-44e0-a44a-2a4aa541b6c1/'
# metadata
meta.all <- read_tsv(paste0(data.loc, 'meta_all_cd.tsv'))
## Rows: 1597 Columns: 6
## ── Column specification ────────────────────────────────────────────────────────
## Delimiter: "\t"
## chr (4): Sample_ID, Group, Individual_ID, Study
## dbl (2): Library_Size, Timepoint
##
## ℹ Use `spec()` to retrieve the full column specification for this data.
## ℹ Specify the column types or set `show_col_types = FALSE` to quiet this message.
# features
feat.motus <- read.table(paste0(data.loc, 'feat_rel_filt_cd.tsv'),
sep='\t', stringsAsFactors = FALSE,
check.names = FALSE)When we look at the number of samples and number of individuals, we see that
that there are several samples per individual for example in the HMP2 study.
x <- meta.all %>%
group_by(Study, Group) %>%
summarise(n.all=n(), .groups='drop')
y <- meta.all %>%
select(Study, Group, Individual_ID) %>%
distinct() %>%
group_by(Study, Group) %>%
summarize(n.indi=n(), .groups='drop')
full_join(x,y)
## Joining with `by = join_by(Study, Group)`
## # A tibble: 10 × 4
## Study Group n.all n.indi
## <chr> <chr> <int> <int>
## 1 Franzosa_2019 CD 88 88
## 2 Franzosa_2019 CTR 56 56
## 3 HMP2 CD 583 50
## 4 HMP2 CTR 357 26
## 5 He_2017 CD 49 49
## 6 He_2017 CTR 53 53
## 7 Lewis_2015 CD 294 85
## 8 Lewis_2015 CTR 25 25
## 9 metaHIT CD 21 13
## 10 metaHIT CTR 71 59Therefore, we are going to train a model on the HMP2 study. However, the
number of samples per individual varies quite a lot across samples, therefore
we want to randomly select a set of 5 samples per individual:
meta.all %>%
filter(Study=='HMP2') %>%
group_by(Individual_ID) %>%
summarise(n=n(), .groups='drop') %>%
pull(n) %>% hist(20)
# sample 5 samples per individual
meta.train <- meta.all %>%
filter(Study=='HMP2') %>%
group_by(Individual_ID) %>%
sample_n(5, replace = TRUE) %>%
distinct() %>%
as.data.frame()
rownames(meta.train) <- meta.train$Sample_IDFor evaluation, we only want a single sample per individual, therefore we can create a new matrix removing repeated samples for the other studies:
meta.ind <- meta.all %>%
group_by(Individual_ID) %>%
filter(Timepoint==min(Timepoint)) %>%
ungroup()Lastly, we can already create a tibble to hold the resulting AUROC values:
auroc.all <- tibble(type=character(0), study.test=character(0), AUC=double(0))3.2 Train with Naive Cross-validation
The naive way to split samples for cross-validation does not take into account the dependency between samples. Therefore, the pipeline would look basically like this:
sc.obj <- siamcat(feat=feat.motus, meta=meta.train,
label='Group', case='CD')
sc.obj <- normalize.features(sc.obj, norm.method = 'log.std',
norm.param=list(log.n0=1e-05,sd.min.q=1),feature.type = 'original')
sc.obj.naive <- create.data.split(sc.obj, num.folds = 10, num.resample = 10)
sc.obj.naive <- train.model(sc.obj.naive, method='lasso')
sc.obj.naive <- make.predictions(sc.obj.naive)
sc.obj.naive <- evaluate.predictions(sc.obj.naive)
auroc.all <- auroc.all %>%
add_row(type='naive', study.test='HMP2',
AUC=as.numeric(eval_data(sc.obj.naive)$auroc))3.3 Train with Blocked Cross-validation
The correct way to to take into account repeated samples would be to block
the cross-validation procedure by individuals. This way, samples from the same
individual will always end up in the same fold. This can be performed in
SIAMCAT by specifying the inseparable parameter in the create.data.split
function:
sc.obj.block <- create.data.split(sc.obj, num.folds = 10, num.resample = 10,
inseparable = 'Individual_ID')
sc.obj.block <- train.model(sc.obj.block, method='lasso')
sc.obj.block <- make.predictions(sc.obj.block)
sc.obj.block <- evaluate.predictions(sc.obj.block)
auroc.all <- auroc.all %>%
add_row(type='blocked', study.test='HMP2',
AUC=as.numeric(eval_data(sc.obj.block)$auroc))3.4 Apply to External Datasets
Now, we can apply both models to external datasets and record the resulting accuracy:
for (i in setdiff(unique(meta.all$Study), 'HMP2')){
meta.test <- meta.ind %>%
filter(Study==i) %>%
as.data.frame()
rownames(meta.test) <- meta.test$Sample_ID
# apply naive model
sc.obj.test <- siamcat(feat=feat.motus, meta=meta.test,
label='Group', case='CD')
sc.obj.test <- make.predictions(sc.obj.naive, sc.obj.test)
sc.obj.test <- evaluate.predictions(sc.obj.test)
auroc.all <- auroc.all %>%
add_row(type='naive', study.test=i,
AUC=as.numeric(eval_data(sc.obj.test)$auroc))
# apply blocked model
sc.obj.test <- siamcat(feat=feat.motus, meta=meta.test,
label='Group', case='CD')
sc.obj.test <- make.predictions(sc.obj.block, sc.obj.test)
sc.obj.test <- evaluate.predictions(sc.obj.test)
auroc.all <- auroc.all %>%
add_row(type='blocked', study.test=i,
AUC=as.numeric(eval_data(sc.obj.test)$auroc))
}3.5 Plot the Results
Now, we can compare the resulting AUROC values between the two different approaches:
auroc.all %>%
# convert to factor to enforce ordering
mutate(type=factor(type, levels = c('naive', 'blocked'))) %>%
# facetting for plotting
mutate(CV=case_when(study.test=='HMP2'~'CV',
TRUE~'External validation')) %>%
ggplot(aes(x=study.test, y=AUC, fill=type)) +
geom_bar(stat='identity', position = position_dodge(), col='black') +
theme_bw() +
coord_cartesian(ylim=c(0.5, 1)) +
scale_fill_manual(values=c('red', 'blue'), name='') +
facet_grid(~CV, space = 'free', scales = 'free') +
xlab('') + ylab('AUROC') +
theme(legend.position = c(0.8, 0.8))
## Warning: A numeric `legend.position` argument in `theme()` was deprecated in ggplot2
## 3.5.0.
## ℹ Please use the `legend.position.inside` argument of `theme()` instead.
## This warning is displayed once every 8 hours.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.
As you can see, the naive cross-validation procedure leads to a inflated performance estimation compared to the blocked cross-validation. However, when assessing generalization to truly external datasets, the blocked procedure results in better performance.
4 Session Info
sessionInfo()
## R version 4.4.0 beta (2024-04-15 r86425)
## Platform: x86_64-pc-linux-gnu
## Running under: Ubuntu 22.04.4 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.19-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats graphics grDevices utils datasets methods base
##
## other attached packages:
## [1] ggpubr_0.6.0 SIAMCAT_2.8.0 phyloseq_1.48.0 mlr3_0.19.0
## [5] lubridate_1.9.3 forcats_1.0.0 stringr_1.5.1 dplyr_1.1.4
## [9] purrr_1.0.2 readr_2.1.5 tidyr_1.3.1 tibble_3.2.1
## [13] ggplot2_3.5.1 tidyverse_2.0.0 BiocStyle_2.32.0
##
## loaded via a namespace (and not attached):
## [1] RColorBrewer_1.1-3 jsonlite_1.8.8 shape_1.4.6.1
## [4] magrittr_2.0.3 magick_2.8.3 farver_2.1.1
## [7] corrplot_0.92 nloptr_2.0.3 rmarkdown_2.26
## [10] zlibbioc_1.50.0 vctrs_0.6.5 multtest_2.60.0
## [13] minqa_1.2.6 PRROC_1.3.1 tinytex_0.50
## [16] rstatix_0.7.2 htmltools_0.5.8.1 progress_1.2.3
## [19] curl_5.2.1 broom_1.0.5 Rhdf5lib_1.26.0
## [22] rhdf5_2.48.0 pROC_1.18.5 sass_0.4.9
## [25] parallelly_1.37.1 bslib_0.7.0 plyr_1.8.9
## [28] palmerpenguins_0.1.1 mlr3tuning_0.20.0 cachem_1.0.8
## [31] uuid_1.2-0 igraph_2.0.3 lifecycle_1.0.4
## [34] iterators_1.0.14 pkgconfig_2.0.3 Matrix_1.7-0
## [37] R6_2.5.1 fastmap_1.1.1 GenomeInfoDbData_1.2.12
## [40] future_1.33.2 digest_0.6.35 numDeriv_2016.8-1.1
## [43] colorspace_2.1-0 S4Vectors_0.42.0 mlr3misc_0.15.0
## [46] vegan_2.6-4 labeling_0.4.3 fansi_1.0.6
## [49] timechange_0.3.0 httr_1.4.7 abind_1.4-5
## [52] mgcv_1.9-1 compiler_4.4.0 beanplot_1.3.1
## [55] bit64_4.0.5 withr_3.0.0 backports_1.4.1
## [58] carData_3.0-5 highr_0.10 ggsignif_0.6.4
## [61] LiblineaR_2.10-23 MASS_7.3-60.2 biomformat_1.32.0
## [64] permute_0.9-7 tools_4.4.0 ape_5.8
## [67] glue_1.7.0 lgr_0.4.4 nlme_3.1-164
## [70] rhdf5filters_1.16.0 grid_4.4.0 checkmate_2.3.1
## [73] gridBase_0.4-7 cluster_2.1.6 reshape2_1.4.4
## [76] ade4_1.7-22 generics_0.1.3 gtable_0.3.5
## [79] tzdb_0.4.0 data.table_1.15.4 hms_1.1.3
## [82] car_3.1-2 utf8_1.2.4 XVector_0.44.0
## [85] BiocGenerics_0.50.0 foreach_1.5.2 pillar_1.9.0
## [88] vroom_1.6.5 bbotk_0.8.0 splines_4.4.0
## [91] lattice_0.22-6 survival_3.6-4 bit_4.0.5
## [94] tidyselect_1.2.1 Biostrings_2.72.0 knitr_1.46
## [97] infotheo_1.2.0.1 gridExtra_2.3 bookdown_0.39
## [100] IRanges_2.38.0 RhpcBLASctl_0.23-42 stats4_4.4.0
## [103] xfun_0.43 Biobase_2.64.0 matrixStats_1.3.0
## [106] stringi_1.8.3 UCSC.utils_1.0.0 yaml_2.3.8
## [109] boot_1.3-30 evaluate_0.23 codetools_0.2-20
## [112] archive_1.1.8 BiocManager_1.30.22 cli_3.6.2
## [115] munsell_0.5.1 jquerylib_0.1.4 mlr3learners_0.6.0
## [118] Rcpp_1.0.12 GenomeInfoDb_1.40.0 globals_0.16.3
## [121] parallel_4.4.0 prettyunits_1.2.0 paradox_0.11.1
## [124] lme4_1.1-35.3 listenv_0.9.1 glmnet_4.1-8
## [127] lmerTest_3.1-3 scales_1.3.0 crayon_1.5.2
## [130] rlang_1.1.3 mlr3measures_0.5.0