snapcount 1.14.0
snapcount is directed at current and potential recount users who want the further ability to quickly filter RNA-seq derived coverage data to just the regions of the human genome and the samples they care about.
This avoids having to download a whole study’s worth of data across the entire genome.
While it offers the same datasets that recount contains, it enables querying via a particular gene or genomic coordinate range entered by the user and only downloading the results from that query.
It then builds a RangedSummarizedExperiment (RSE) object on the fly, based on just the rows/columns in those results.
This query functionality is supported for genes, exons, and exon-exon junctions.
In addition, a set of aggregation functions are available for exon-exon junction data to allow for further filtering and summarizing.
R is an open-source statistical environment which can be easily modified to enhance its functionality via packages.
R can be installed on any operating system from CRAN after which you can install snapcount
by using the following commands in your R session:
if (!requireNamespace("BiocManager", quietly = TRUE))
install.packages("BiocManager")
BiocManager::install("snapcount")
## Check that you have a valid Bioconductor installation
BiocManager::valid()snapcount is based on other packages and in particular in those that have implemented the infrastructure needed for dealing with RNA-seq data. That is, packages like GenomicFeatures and recount that allow you to import the data. A snapcount user is not expected to deal with those packages directly but will need to be familiar with SummarizedExperiment to understand the results snapcount generates. This vignette is based partially on the recount2 quick start guide.
If you are asking yourself the question “Where do I start using Bioconductor?” you might be interested in this blog post.
As package developers, we try to explain clearly how to use our packages and in which order to use the functions. But R and Bioconductor have a steep learning curve so it is critical to learn where to ask for help. The blog post quoted above mentions some but we would like to highlight the Bioconductor support site as the main resource for getting help: remember to use the snapcount tag and check the older posts. Other alternatives are available such as creating GitHub issues and tweeting. However, please note that if you want to receive help you should adhere to the posting guidelines. It is particularly critical that you provide a small reproducible example and your session information so package developers can track down the source of the error.
snapcount is an interface to the Snaptron webservices and data. For questions regarding Snaptron itself and/or its data, please use the Gitter channel.
We hope that snapcount will be useful for your research. Please use the following information to cite the package specifically, thank you!
Christopher Wilks, Rone Charles, Ben Langmead (2019).
snapcount: R/Bioconductor Package for interfacing with Snaptron
for rapid quering of expression counts.
https://github.com/langmead-lab/snapcountThe Snaptron project itself is published separately and can be cited with the following:
Wilks, C, Gaddipati, P, Nellore, A, Langmead, B (2018).
Snaptron: querying splicing patterns across tens
of thousands of RNA-seq samples.
Bioinformatics, 34, 1:114-116.snapcount makes it easy to query the Snaptron web services, with results presented as RangedSummarizedExperiment objects.
You can query measurements for genes, exons, splice junctions and coverage vectors from the RNA-seq samples indexed in Snaptron.
Samples are organized into compilations (e.g. srav2) that altogether contain the same studies and summaries in the recount resource. Queries can be filtered to narrow the focus to particular genes or genomic intervals, to events with certain prevalence, to events that do or don’t appear in gene annotation, or to samples with particular metadata.
snapcount complements the recount package, which also allows for searching by coordinates or by HUGO gene names. In general, recount works best when you are interested in all the genes, exons, or splice junctions in a study, whereas snapcount is best for queries over a particular subset of genes or intervals across all or most of the samples in recount2/Snaptron. The more specific your query, the faster and easier it will be to use snapcount.
All the RNA-seq samples in the recount and Snaptron resources were analyzed using the Rail-RNA aligner. Rail produces spliced alignments that in turn produce coverage and junction-level summaries that are further processed to obtain the data in recount and Snaptron.
Similar to the recount all coverage counts in Snaptron/snapcount are stored/retrieved as raw, un-normalized counts.
A basic query returns a RangedSummarizedExperiment (RSE) object with one or more features (genes, exons, or splice junctions) as rowRanges. Raw coverage counts are returned as the counts assay in the RSE Full sample metadata is returned as the colData of the RSE
Basic queries include:
The Gencode v25 annotation defines what genes and exons can be queried (as in recount). For splice junctions, both annotated and novel junctions are queried at the same time unless one is explicitly filtered.
Metadata columns will vary by compilation (e.g. TCGA vs. GTEx).
Please be cautious with metadata. We strive to make it as complete and usable as possible, but it can still be incomplete, incorrect or inconsistently formatted (e.g. “age” in the srav2 compilation).
Start by querying for all junctions within the region of gene CD99:
##Query coverage for gene, exon, and annotated junctions across all
#in the region of the CD99 gene
#from GTEx v6 sample compilation
#CD99 is chosen for its size
sb <- QueryBuilder(compilation="gtex", regions="CD99")
cd99.gene <- query_gene(sb)
dim(cd99.gene)## [1] 1 9662head(cd99.gene)## class: RangedSummarizedExperiment
## dim: 1 9662
## metadata(1): uri
## assays(1): counts
## rownames(1): 23
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## compilation_id
## colnames(9662): rail_50099 rail_50100 ... rail_59759 rail_59760
## colData names(322): rail_id Run ... junction_coverage
## junction_avg_coverageNow query for junctions:
##Query all exon-exon splice junctions within the region of gene CD99
cd99.jx.all <- query_jx(sb)
dim(cd99.jx.all)## [1] 3485 9662cd99.jx.all## class: RangedSummarizedExperiment
## dim: 3485 9662
## metadata(1): uri
## assays(1): counts
## rownames(3485): 28340058 28340273 ... 28352407 28352408
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## source_dataset_id
## colnames(9662): rail_50099 rail_50100 ... rail_59759 rail_59760
## colData names(322): rail_id Run ... junction_coverage
## junction_avg_coverageNow query for junctions and filter by sample type: Brain:
#now subfilter by sample tissue
#GTEx samples that are labeled with tissue type "Brain"
sb <- set_column_filters(sb, SMTS == "Brain")
cd99.jx.all <- query_jx(sb)
dim(cd99.jx.all)## [1] 637 1409head(cd99.jx.all)## class: RangedSummarizedExperiment
## dim: 6 1409
## metadata(1): uri
## assays(1): counts
## rownames(6): 28340058 28341126 ... 28341507 28341508
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## source_dataset_id
## colnames(1409): rail_50099 rail_50105 ... rail_59748 rail_59753
## colData names(322): rail_id Run ... junction_coverage
## junction_avg_coverageSame query/filter again but for exons:
cd99.exon <- query_exon(sb)
dim(cd99.exon)## [1] 32 1409head(cd99.exon)## class: RangedSummarizedExperiment
## dim: 6 1409
## metadata(1): uri
## assays(1): counts
## rownames(6): 691 692 ... 695 696
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## compilation_id
## colnames(1409): rail_50099 rail_50105 ... rail_59748 rail_59753
## colData names(322): rail_id Run ... junction_coverage
## junction_avg_coverageNow query junctions but further filter for only those which are fully annotated:
###Only query junctions which are fully annotated---both left and
#right splice sites are found together in one or more of the
#Snaptron sourced annotations
sb <- set_row_filters(sb, annotated == 1)
cd99.jx <- query_jx(sb)
dim(cd99.jx)## [1] 23 1409head(cd99.jx)## class: RangedSummarizedExperiment
## dim: 6 1409
## metadata(1): uri
## assays(1): counts
## rownames(6): 28350154 28350172 ... 28350658 28350686
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## source_dataset_id
## colnames(1409): rail_50099 rail_50105 ... rail_59748 rail_59753
## colData names(322): rail_id Run ... junction_coverage
## junction_avg_coverageNow check an example of the metadata stored in the RSE, InsertSize:
##Metadata is stored directly in the RSE object.
#For example the library insert size can be retrieved
#across all runs in the RSE
head(cd99.jx.all$InsertSize)## [1] 162 302 163 150 223 150“High-level” queries answer more complex questions about splicing patterns. Results of high level queries are data frames unless otherwise specified.
PSI measures how often an exon is included in the surrounding transcript.
This query considers only the common case
where a cassette exon has two inclusion junctions (junctions that join the exon to its up- and downstream neighbors) and one exclusion junction (that goes between the neighbors while skipping the exon).
Normal PSI values range from 0 (never included) to 1 (always included).
The value -1 is returned for a
sample where either one or the other inclusion groups had 0 coverage or the total raw coverage
across groups was less than a specified minimum count (min_count defaults to 20).
#Build new query against GTEx
#left inclusion query
lq <- QueryBuilder(compilation="gtex", regions="chr19:45297955-45298142")
lq <- set_row_filters(lq, strand == "+")
lq <- set_coordinate_modifier(lq, Coordinates$Exact)
#right inclusion query
rq <- QueryBuilder(compilation="gtex", regions="chr19:45298223-45299810")
rq <- set_row_filters(rq, strand == "+")
rq <- set_coordinate_modifier(rq, Coordinates$Exact)
#exclusion query
ex <- QueryBuilder(compilation="gtex", regions="chr19:45297955-45299810")
ex <- set_row_filters(ex, strand == "+")
ex <- set_coordinate_modifier(ex, Coordinates$Exact)
psi <- percent_spliced_in(list(lq), list(rq), list(ex))
#order by psi descending
psi <- psi[order(-psi),]
head(psi)## sample_id inclusion_group1_coverage inclusion_group2_coverage
## 1: 50398 21 23
## 2: 50706 31 24
## 3: 51027 35 21
## 4: 51198 52 37
## 5: 51490 18 23
## 6: 52153 30 24
## exclusion_group_coverage psi
## 1: 0 1
## 2: 0 1
## 3: 0 1
## 4: 0 1
## 5: 0 1
## 6: 0 1Junction Inclusion Ratio (JIR) measures the relative prevalence of two splicing patterns. It is similar to, but more general than the PSI query. The query defines two sets of junctions to be compared. The sets may or may not have some junctions in common. JIR ranges from -1.0 to 1.0, where 0 says that the total number of reads supporting the junctions in set A equals the number of reads supporting set-B junctions. JIR approaches 1 when there are many more reads supporting the set-B junctions compared to the set-A junctions. JIR approaches -1 when set-A junctions have many more supporting reads than set-B junctions. The list of results is presented in descending order by JIR.
#groupA
A <- QueryBuilder(compilation="srav2", regions="chr2:29446395-30142858")
A <- set_row_filters(A, strand == "-")
A <- set_coordinate_modifier(A, Coordinates$Within)
#groupB
B <- QueryBuilder(compilation="srav2", regions="chr2:29416789-29446394")
B <- set_row_filters(B, strand == "-")
B <- set_coordinate_modifier(B, Coordinates$Within)
jir <- junction_inclusion_ratio(list(A),
list(B),
group_names=c("groupA","groupB"))
head(jir)## sample_id groupA_coverage groupB_coverage jir
## 1: 46981 1 23 0.8800000
## 2: 45163 0 3 0.7500000
## 3: 6934 0 2 0.6666667
## 4: 29768 0 2 0.6666667
## 5: 42111 0 2 0.6666667
## 6: 2045 0 1 0.5000000This query asks if a particular set of junctions seems to be associated with tissue type.
This query defaults to using the gtex compilation, but it could work with any compilation having a tissue metadata field (e.g. tcga).
The main output is a list of all the samples in the compilation with either a 0 or a 1 in the shared column. 1 indicates that a junction from the query occurs in that sample (tissue type).
This output can be passed to a statistical test such as an F-test to assess the significance of tissue enrichment.
A <- QueryBuilder(compilation="gtex", regions="chr4:20763023-20763023")
A <- set_row_filters(A, strand == "-")
A <- set_coordinate_modifier(A, Coordinates$EndIsExactOrWithin)
ts <- tissue_specificity(list(A))
head(ts)## sample_id shared tissue group
## 1: 50099 TRUE Brain g1
## 2: 50100 FALSE Testis g1
## 3: 50101 FALSE Heart g1
## 4: 50102 FALSE Nerve g1
## 5: 50103 FALSE Lung g1
## 6: 50104 FALSE Skin g1The TS function also supports more than one set of junctions.
The main output is a list of all the samples in the compilation with either a 0 or a 1 in the shared column. 1 here indicates that at least one junction from all sets occurred in that sample, i.e. the sample is shared across the results of all the junction queries.
A use case of the 2-set TS function is to measure the significance of tissue enrichment across junctions which support a cassette exon.
A <- QueryBuilder(compilation="gtex", regions="chr4:20763023-20763023")
A <- set_row_filters(A, strand == "-")
A <- set_coordinate_modifier(A, Coordinates$EndIsExactOrWithin)
B <- QueryBuilder(compilation="gtex", regions="chr4:20763098-20763098")
B <- set_row_filters(B, strand == "-")
B <- set_coordinate_modifier(B, Coordinates$StartIsExactOrWithin)
ts <- tissue_specificity(list(A, B))
head(ts)## sample_id shared tissue group
## 1: 50099 TRUE Brain g1
## 2: 50100 FALSE Testis g1
## 3: 50101 FALSE Heart g1
## 4: 50102 FALSE Nerve g1
## 5: 50103 FALSE Lung g1
## 6: 50104 FALSE Skin g1The junction union query provides the ability to get a single RSE object of non-redundant junctions across multiple compilations which share a common reference (e.g. HG38). Junctions which are the same (have the same chromosome coordinates and strand) are merged into a single row.
An example would be search for the same junctions across the human HG38-based compilations, GTEx and TCGA. This can be used to efficiently leverage GTEx as a substitute “normal” control, while searching for splicing phenomena specific to the tumor samples in TCGA.
In the following example we query for all junctions that have a specific 5’ (donor) coordinate in both compilations, merging the results. Note, this query, due to the number of samples involved (approximately 18,000) takes several seconds to complete.
gtex <- QueryBuilder(compilation="gtex", regions="chr1:1879786-1879786")
gtex <- set_row_filters(gtex, strand == "-")
gtex <- set_coordinate_modifier(gtex, Coordinates$EndIsExactOrWithin)
tcga <- QueryBuilder(compilation="tcga", regions="chr1:1879786-1879786")
tcga <- set_row_filters(tcga, strand == "-")
tcga <- set_coordinate_modifier(tcga, Coordinates$EndIsExactOrWithin)
gtex_tcga_union <- junction_union(gtex,tcga)
dim(gtex_tcga_union)## [1] 103 18755head(gtex_tcga_union)## class: RangedSummarizedExperiment
## dim: 6 18755
## metadata(1): uri
## assays(1): counts
## rownames(6): 93197,130886 ,150181 ... ,170050 ,171092
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## source_dataset_id
## colnames(18755): rail_50099 rail_50100 ... rail_71109 rail_71110
## colData names(1182): rail_id Run ... junction_coverage.y
## junction_avg_coverage.yThe junction intersection query provides similar functionality but restricting the output RSE object to only those junctions found in both compilations.
Using the same scenario as above, but this time the result set will be reduced.
gtex <- QueryBuilder(compilation="gtex", regions="chr1:1879786-1879786")
gtex <- set_row_filters(gtex, strand == "-")
gtex <- set_coordinate_modifier(gtex, Coordinates$EndIsExactOrWithin)
tcga <- QueryBuilder(compilation="tcga", regions="chr1:1879786-1879786")
tcga <- set_row_filters(tcga, strand == "-")
tcga <- set_coordinate_modifier(tcga, Coordinates$EndIsExactOrWithin)
gtex_tcga_intersection <- junction_intersection(gtex,tcga)
dim(gtex_tcga_intersection)## [1] 53 18755head(gtex_tcga_intersection)## class: RangedSummarizedExperiment
## dim: 6 18755
## metadata(1): uri
## assays(1): counts
## rownames(6): 93197,130886 124413,178993 ... 127265,183493 127460,183776
## rowData names(12): DataSource:Type snaptron_id ... coverage_median
## source_dataset_id
## colnames(18755): rail_50099 rail_50100 ... rail_71109 rail_71110
## colData names(1182): rail_id Run ... junction_coverage.y
## junction_avg_coverage.y