Methylation Analysis with MEAL
24 October 2023
Package
MEAL 1.32.0
1 Introduction
Illumina Infinium HumanMethylation 450K BeadChip assay has become a standard tool to analyse methylation in human samples. Developed in 2011, it has already been used in projects such as The Cancer Genome Atlas (TCGA). Their 450.000 probes provide a good overall image of the methylation state of the genome, being one of the reasons of its success.
Given its complex design1 More information can be found at this minfi tutorial, many Bioconductor packages have been developed to assess normalization and pre-processing issues (e.g. minfi (Aryee et al. 2014) or lumi (Du, Kibbe, and Lin 2008)). In addition, these packages can detect differentially methylated probes (DMPs) and differentially methylated regions (DMRs). However, the interfaces are not very intuitive and several scripting steps are usually required.
MEAL aims to facilitate the analysis of Illumina Methylation 450K chips. We have included two methods to analyze DMPs (Differentially Methylated Probes), that test differences in means (limma) or differences in variance (DiffVar). We have included three DMRs (Differentially Methylated Regions) detection algorithms (bumphunter, blockFinder and DMRcate) and a new method to test differences in methylation in a target region (RDA). Finally, we have prepared plots for all these analyses as well as a wrapper to run all the analyses in the same dataset.
2 Input data
MEAL is meant to analyze methylation data already preprocessed. All our functions accept a GenomicRatioSet as input, which is a class from minfi package designed to manage preprocessed methylation data. Users willing to preprocess their own data are encouraged to take a look to minfi’s vignette
In this vignette, we will use methylation data from minfiData package.
library(MEAL)
library(MultiDataSet)
library(minfiData)
library(minfi)
library(ggplot2)
data("MsetEx")MsetEx is a MethylationRatioSet that contains measurements for 485512 CpGs and 6 samples, as well as some phenotypic variables such as age or sex. The first step will be to convert it to a GenomicRatioSet. Then, we will add some extra features annotation. Finally, we will remove probes not measuring methylation, with SNPs or with NAs. For the sake of speed, we will select a subset of CpGs:
meth <- mapToGenome(ratioConvert(MsetEx))
rowData(meth) <- getAnnotation(meth)[, -c(1:3)]
## Remove probes measuring SNPs
meth <- dropMethylationLoci(meth)
## Remove probes with SNPs
meth <- dropLociWithSnps(meth)
## Remove probes with NAs
meth <- meth[!apply(getBeta(meth), 1, function(x) any(is.na(x))), ]
## Select a subset of samples
set.seed(0)
meth <- meth[sample(nrow(meth), 100000), ]3 Analyzing Methylation data
3.1 Pipeline
The function runPipeline run all methods included in MEAL to the same dataset. We only need to pass to this function a GenomicRatioSet and the name of our variable of interest. In our case, we will analyze the effect of cancer on methylation:
res <- runPipeline(set = meth, variable_names = "status")runPipeline includes several parameters to customize the analyses. The most important parameters are covariable_names, betas and sva. covariable_names is used to include covariates in our models. betas allows the user choosing between running the analyis with beta (TRUE) or M-values (FALSE). If sva is TRUE, Surrogate Variable Analysis is run and surrogate variables are included in the models. Finally, some parameters modify the behaviour of the methods included in the wrapper and they will be covered later on. More information about the parameters can be found in the documentation (by typing ?runPipeline).
We will run a new analysis including age as covariate:
resAdj <- runPipeline(set = meth, variable_names = "status",
covariable_names = "age", analyses = c("DiffMean", "DiffVar"))
resAdj## Object of class 'ResultSet'
## . created with: runPipeline
## . sva: no
## . #results: 2 ( error: 0 )
## . featureData: 100000 probes x 35 variables3.2 Managing the results
runPipeline generates a ResultSet object. ResultSet is a class designed to encapsulate different results from the same dataset. It contains the results of the different methods, the feature data and other data required to get tables or plots. We can examine the analyses included in a ResultSet with the function names:
names(resAdj)## [1] "DiffMean" "DiffVar"Both objects contains five analyses. DiffMean is an analysis of difference of means performed with limma while the others are named with the method name (DiffVar, bumphunter, blockFinder and dmrcate).
We can use the function getAssociation to get a data.frame with the results, independent of the original method. This function has two main arguments: object and rid. object is the ResultSet with our data and rid is the name or the index of the analysis we want to extract.
head(getAssociation(resAdj, "DiffMean"))## logFC CI.L CI.R AveExpr t P.Value
## cg09383816 -0.5938196 -0.6310536 -0.5565855 0.4885486 -42.93778 7.098649e-07
## cg26729197 -0.5779628 -0.6186821 -0.5372435 0.3630791 -38.21419 1.176118e-06
## cg19333963 -0.6532176 -0.7032282 -0.6032071 0.4092923 -35.16587 1.685708e-06
## cg09150117 -0.6045812 -0.6509778 -0.5581846 0.4853409 -35.08275 1.703065e-06
## cg13307451 -0.5417324 -0.5838896 -0.4995751 0.3924193 -34.59696 1.809029e-06
## cg19859781 0.4257460 0.3904540 0.4610380 0.5983762 32.47878 2.377898e-06
## adj.P.Val B SE
## cg09383816 0.01629257 5.595805 0.03090437
## cg26729197 0.01629257 5.410263 0.02239892
## cg19333963 0.01629257 5.258877 0.07809844
## cg09150117 0.01629257 5.254326 0.04401591
## cg13307451 0.01629257 5.227227 0.01771050
## cg19859781 0.01629257 5.098421 0.07097404head(getAssociation(resAdj, "DiffVar"))## logFC CI.L CI.R AveExpr t P.Value
## cg11847929 -2.327910 -3.146772 -1.5090476 1.4656792 -6.813262 0.0003320046
## cg06265760 -1.730019 -2.362333 -1.0977058 0.9442413 -6.557196 0.0004149426
## cg02076607 -1.541192 -2.106092 -0.9762907 1.1829703 -6.538591 0.0004218303
## cg05635754 -2.438282 -3.333548 -1.5430149 1.2934636 -6.527263 0.0004260870
## cg22891595 -1.525000 -2.085639 -0.9643620 0.9589610 -6.519089 0.0004291892
## cg01287975 -1.881061 -2.575312 -1.1868104 0.9752451 -6.493611 0.0004390231
## adj.P.Val B SE
## cg11847929 0.1787794 0.23218162 0.10537499
## cg06265760 0.1787794 0.08995047 0.09685284
## cg02076607 0.1787794 0.07929272 0.16051859
## cg05635754 0.1787794 0.07278219 0.12877918
## cg22891595 0.1787794 0.06807333 0.16428448
## cg01287975 0.1787794 0.05334128 0.15043591DiffMean and DiffVar are internally stored as a MArrayLM, the class from limma results. This class allows testing different constrasts or evaluating different variables simultaneously. The function getProbeResults helps the user performing these operations. It also has the arguments object and rid from getAssociation. coef is a numeric with the index of the coefficient from which we want the results. If we did not pass a custom model to runPipeline, the first coefficient (coef = 1) is the intercept and the second coefficient (coef = 2) is the first variable that we included in variable_names. We can evaluate different coefficients simultaneously by passing a vector to coef. contrast is a matrix with the contrasts that we want to evaluate. This option is useful when our variable of interest is a factor with several levels and we want to do all the different comparisons. Finally, the argument fNames is used to select the variables from features annotation that will be added to the tables.
To exemplify the use of this function, we will evaluate our whole adjusted model, including age coefficient. We will also add some annotation of the CpGs:
head(getProbeResults(resAdj, rid = 1, coef = 2:3,
fNames = c("chromosome", "start")))## statusnormal age AveExpr F P.Value
## cg09383816 -0.5938196 -0.0026657333 0.4885486 929.9010 1.924508e-06
## cg26729197 -0.5779628 -0.0005001219 0.3630791 730.3999 3.246391e-06
## cg13307451 -0.5417324 -0.0064613777 0.3924193 635.4818 4.387672e-06
## cg09150117 -0.6045812 0.0032853408 0.4853409 623.2986 4.575331e-06
## cg19333963 -0.6532176 0.0019529459 0.4092923 620.7215 4.616527e-06
## cg19859781 0.4257460 -0.0020866765 0.5983762 532.9428 6.419871e-06
## adj.P.Val SE.statusnormal SE.age chromosome start
## cg09383816 0.04313762 0.0309043657 0.0014823190 chr8 67344556
## cg26729197 0.04313762 0.0223989196 0.0010743577 chr17 71161415
## cg13307451 0.04313762 0.0780984369 0.0037459690 chr10 22541442
## cg09150117 0.04313762 0.0440159139 0.0021112106 chr7 96653867
## cg19333963 0.04313762 0.0177105042 0.0008494792 chr19 1467979
## cg19859781 0.04313762 0.0709740354 0.0034042491 chr13 40174685When more than one coefficient is evaluated, a estimate for each coefficient is returned and the t-statistic is substituted by a F-statistic. More information about linear models, including a detailed section of how to create a constrast matrix can be found in limma users’ guide.
Finally, we can obtain the results of CpGs mapped to some genes with the function getGeneVals. This function accepts the same arguments than getProbeResults but includes the arguments gene and genecol to pass the names of the genes to be selected and the column name of feature data containing gene names.
We will retrieve the difference in variance results for all CpGs mapped to ARMS2. We can see in the rowData of meth that gene names are in the column ‘UCSC_RefGene_Name’:
getGeneVals(resAdj, "ARMS2", genecol = "UCSC_RefGene_Name", fNames = c("chromosome", "start"))## logFC CI.L CI.R AveExpr t P.Value
## cg00676728 0.1106853 0.01259430 0.2087763 0.8206485 3.037987 0.03458282
## cg18222240 0.1874701 -0.01570234 0.3906426 0.5432686 2.484233 0.06300344
## adj.P.Val B SE chromosome start
## cg00676728 0.1946025 -4.130757 0.01303783 chr10 124213760
## cg18222240 0.2718642 -4.801220 0.02864301 chr10 124213527
## UCSC_RefGene_Name
## cg00676728 ARMS2
## cg18222240 ARMS23.3 Plotting the results
We can easily get Manhattan plots, Volcano plots and QQ-plots for the probes results (DiffMean and DiffVar) using plot method. Our extension of plot method to ResultSet includes the arguments rid or coef that were already present in getProbeResult. In addition, the argument type allows choosing between a Manhattan plot (“manhattan”), a Volcano plot (“volcano”) or a qq-plot (“qq”).
3.3.1 Manhattan plot
We can customize different aspects of a Manhattan plot. We can highlight the CpGs of a target region by passing a GenomicRanges to the argument highlight. Similarly, we can get a Manhattan plot with only the CpGs of our target region passing a GenomicRanges to the argument subset. It should be noticed that the GenomicRange should have the chromosome as a number (1-24).
We will show these capabilities by highlighting and subsetting a region of ten Mb in chromosome X:
targetRange <- GRanges("23:13000000-23000000")
plot(resAdj, rid = "DiffMean", type = "manhattan", highlight = targetRange)
plot(resAdj, rid = "DiffMean", type = "manhattan", subset = targetRange)
We can also change the height of lines marking different levels of significance. Height of blue line can be set with suggestiveline parameter and red line with genomewideline parameter. It should be noticed that these values are expressed as -log10 of p-value. Finally, as our Manhattan plot is done with base framework, we can customize the plot using base plotting functions such as points, lines or text or arguments of plot function like main:
plot(resAdj, rid = "DiffMean", type = "manhattan", suggestiveline = 3,
genomewideline = 6, main = "My custom Manhattan")
abline(h = 13, col = "yellow")
3.3.2 Volcano plot
In our Volcano plot, we can also customize the thresholds for statistical significance and magnitude of the effect using the arguments tPV and tFC. As in the previous case, tPV is expressed as -log10 of p-value. On the other hand, tFC units will change depending if we used beta or M-values. show.labels can turn on and turn off the labelling of significant features. Finally, Volcano plot is based on ggplot2 so we can further customize the plot adding new layers:
plot(resAdj, rid = "DiffMean", type = "volcano", tPV = 14, tFC = 0.4,
show.labels = FALSE) + ggtitle("My custom Volcano")
3.3.3 QQplot
Our QQplot include the computation of the lambda, a measure of the inflation of the p-values. We can remove this value with the parameter show.lambda.
Our qqplot is also based on ggplot2 so we will add a title to customize it:
plot(resAdj, rid = "DiffMean", type = "qq") + ggtitle("My custom QQplot")
3.3.4 Features
MEAL incorporates the function plotFeature to plot the beta values distribution of a CpG. plotFeature has three main arguments. set is the GenomicRatioSet with the methylation data. feat is the index or name of our target CpG. variables is a character vector with the names of the variables used in the plot. We can include two variables in our plot.
In the next line, we will plot a CpG with high difference in means between cases and controls (cg25104555) and a CpG with high difference in variance (cg11847929) vs cancer status. As plotFeature is based on ggplot2, we can customize it:
plotFeature(set = meth, feat = "cg09383816", variables = "status") +
ggtitle("Diff Means")
plotFeature(set = meth, feat = "cg11847929", variables = "status") +
ggtitle("Diff Vars")
3.3.5 Regional plotting
We can simultaneously plot the different results in a target region along with gene and CpG annotation with the function plotRegion. This function has two main arguments. rset is the ResultSet and range is a GenomicRanges with our target region.
We will plot a region of 1 Mb in chromosome X:
targetRange <- GRanges("chrX:13000000-14000000")
plotRegion(resAdj, targetRange)
Our plot has three main parts. The top contains the annotation of the regional genes and the CpGs included in the analysis. The middle part contains the results of the DMR detection methods (Bumphunter, blockFinder and DMRcate). The bottom part contains the results of the single probe analyses (differential mean and differential variance). Each analysis has two parts: the coefficients and the p-values. The line in the p-values plot marks the significance threshold.
By default,plotRegion includes all analyses run in the plot. However, we can plot only few analyses with the parameter results. We can also modify the height of the p-value line with the parameter tPV (units are -log10 of p-value):
plotRegion(resAdj, targetRange, results = c("DiffMean"), tPV = 10)
3.4 Methods wrappers
MEAL includes wrappers to run the different methods of the pipeline individually. All these functions accept a GenomicRatioSet as input and can return the results in a ResultSet. Consequently, functionalities described in the above section for the results of the pipeline also apply for the results of a single method.
3.4.1 Differences of mean analysis
We can test if a phenotype causes changes in methylation means using the runDiffMeanAnalysis. This function is a wrapper of lmFit function from limma and requires two arguments: set and model. set contains the methylation data, either in a GenomicRatioSet or a matrix. model can be a matrix with the linear model or a formula indicating the model. In the former case, set must be a GenomicRatioSet and the variables included in the model must be present in the colData of our set.
We exemplify the use of this function by running the same linear model than in our pipeline:
resDM <- runDiffMeanAnalysis(set = meth, model = ~ status)runDiffMeanAnalysis also has other parameters to customize the analysis. If set is a GenomicRatioSet, the parameter betas allows us choosing between betas (TRUE) and M-values (FALSE). We can also run a robust linear model changing the parameter method to “robust”. Finally, resultSet indicates if the function will return a ResultSet (TRUE) or a MArrayLM (FALSE).
All these parameters can be set in the runPipeline function with the argument DiffMean_params.
3.4.2 Differences of Variance analysis
We can test if a phenotype causes changes in methylation variance using the runDiffVarAnalysis. This function is a wrapper of varFit function from missMethyl and requires three arguments: set, model and coefficient. set contains the methylation data in a GenomicRatioSet. model can be a matrix with the linear model or a formula indicating the model. In the former case, the variables included in the model must be present in the colData of our set. coefficient indicates the variables of the linear model for which the difference of variance will be computed. By default, all discrete variables will be included.
We exemplify the use of this function by running the same model than in our pipeline:
resDV <- runDiffVarAnalysis(set = meth, model = ~ status, coefficient = 2)runDiffVarAnalysis also has the parameter resultSet that allows returning a MArrayLM object instead of a ResultSet. Finally, we can change other parameters of varFit function using the ... argument. These parameters can also be set in the runPipeline function passing them to the argument DiffVar_params.
3.4.3 RDA
We can determine if a genomic region is differentially methylated with RDA (Redundancy Analysis). This analysis can be run with the function runRDA that requires three arguments: set, model and range. As in the previous functions, set is a GenomicRatioSet with the methylation data and model contains the linear model either in a matrix or in a formula. range is a GenomicRanges with the coordinates of our target region.
We will exemplify the use of this function by running RDA in a region of chromosome X:
targetRange <- GRanges("chrX:13000000-23000000")
resRDA <- runRDA(set = meth, model = ~ status, range = targetRange)runRDA also has other parameters to customize the analysis. The parameter betas allows us choosing between betas (TRUE) and M-values (FALSE). num_vars selects the number of columns in model matrix considered as variables. The remaining columns will be considered as covariates. num_permutations indicates the number of permutations run to compute p-values. resultSet allows returning a rda object from vegan package instead of a ResultSet.
We can run RDA in our pipeline when we are a priori interested in a target genomic range. In this case, we will pass our target region to the argument range of runPipeline. We can pass other parameters of runRDA using the argument rda_params.
3.4.3.1 Managing and plotting RDA results
We can retrieve RDA results using the function getAssociation:
getAssociation(resRDA, rid = "RDA")## Call: rda(X = t(mat), Y = varsmodel, Z = covarsmodel)
##
## Inertia Proportion Rank
## Total 260.3301 1.0000
## Constrained 26.9344 0.1035 1
## Unconstrained 233.3957 0.8965 4
## Inertia is variance
## Some constraints or conditions were aliased because they were redundant
##
## Eigenvalues for constrained axes:
## RDA1
## 26.934
##
## Eigenvalues for unconstrained axes:
## PC1 PC2 PC3 PC4
## 191.62 24.28 12.83 4.66RDA results are encapsulated in a rda object from vegan package. We can get a summary of RDA results with the function getRDAresults:
getRDAresults(resRDA)## R2 pval global.R2 global.pval
## 0.1034627 0.5000000 0.4226856 1.0000000This function returns four values: R2, pval, global.R2 and global.pval. R2 is the ammount of variance that the model explains in our target region. pval is the probability of finding this ammount of variance of higher by change. global.R2 is the ammount of variance that our model explains in the whole genome. global.pval is the probability of finding a region with the same number of probes explaining the same or more variance than our target region. With these values, we can determine if our target region is differentially methylated and if this phenomena is local or global.
The function topRDAhits returns a data.frame with features associated to first two RDA components. This functions computes a Pearson correlation test between the methylation values and the RDA components. Only CpGs with a p-value lower than tPV parameter (by default 0.05) with any of the components are included in the data.frame:
topRDAhits(resRDA)## [1] feat RDA cor P.Value adj.P.Val
## <0 rows> (or 0-length row.names)Finally, we can plot the first two dimensions of our RDA with the function plotRDA. This function makes a biplot of samples and features. We can color the samples using categorical variables by passing in a data.frame to argument pheno.
We will plot RDA using status variable of our sets colData:
plotRDA(object = resRDA, pheno = colData(meth)[, "status", drop = FALSE])
The RDA plot prints a label at the center of each group and the summary of RDA results (R2 and p-value) in the legend. plotRDA has two additional arguments. main is a character vector with the plot’s title. n_feat is a numeric with the number of feats that will have a label in the text. Only the n_feat features most associated to each of the components will be displayed.
plotRDA relies on base paradigm, so we can add layers using functions from this infrastructure (e.g. lines, points…):
plotRDA(object = resRDA, pheno = colData(meth)[, "status", drop = FALSE])
abline(h = -1)
4 Session Info
sessionInfo()## R version 4.3.1 (2023-06-16)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 22.04.3 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.18-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] parallel stats4 stats graphics grDevices utils datasets
## [8] methods base
##
## other attached packages:
## [1] ggplot2_3.4.4
## [2] minfiData_0.47.0
## [3] IlluminaHumanMethylation450kanno.ilmn12.hg19_0.6.1
## [4] IlluminaHumanMethylation450kmanifest_0.4.0
## [5] minfi_1.48.0
## [6] bumphunter_1.44.0
## [7] locfit_1.5-9.8
## [8] iterators_1.0.14
## [9] foreach_1.5.2
## [10] Biostrings_2.70.0
## [11] XVector_0.42.0
## [12] SummarizedExperiment_1.32.0
## [13] MatrixGenerics_1.14.0
## [14] matrixStats_1.0.0
## [15] GenomicRanges_1.54.0
## [16] GenomeInfoDb_1.38.0
## [17] IRanges_2.36.0
## [18] S4Vectors_0.40.0
## [19] MEAL_1.32.0
## [20] MultiDataSet_1.30.0
## [21] Biobase_2.62.0
## [22] BiocGenerics_0.48.0
## [23] BiocStyle_2.30.0
##
## loaded via a namespace (and not attached):
## [1] splines_4.3.1
## [2] BiocIO_1.12.0
## [3] bitops_1.0-7
## [4] filelock_1.0.2
## [5] tibble_3.2.1
## [6] preprocessCore_1.64.0
## [7] rpart_4.1.21
## [8] XML_3.99-0.14
## [9] lifecycle_1.0.3
## [10] ensembldb_2.26.0
## [11] lattice_0.22-5
## [12] MASS_7.3-60
## [13] base64_2.0.1
## [14] scrime_1.3.5
## [15] backports_1.4.1
## [16] magrittr_2.0.3
## [17] Hmisc_5.1-1
## [18] limma_3.58.0
## [19] sass_0.4.7
## [20] rmarkdown_2.25
## [21] jquerylib_0.1.4
## [22] yaml_2.3.7
## [23] doRNG_1.8.6
## [24] askpass_1.2.0
## [25] Gviz_1.46.0
## [26] DBI_1.1.3
## [27] RColorBrewer_1.1-3
## [28] abind_1.4-5
## [29] zlibbioc_1.48.0
## [30] quadprog_1.5-8
## [31] purrr_1.0.2
## [32] AnnotationFilter_1.26.0
## [33] biovizBase_1.50.0
## [34] RCurl_1.98-1.12
## [35] nnet_7.3-19
## [36] VariantAnnotation_1.48.0
## [37] rappdirs_0.3.3
## [38] GenomeInfoDbData_1.2.11
## [39] genefilter_1.84.0
## [40] vegan_2.6-4
## [41] annotate_1.80.0
## [42] permute_0.9-7
## [43] DelayedMatrixStats_1.24.0
## [44] codetools_0.2-19
## [45] DelayedArray_0.28.0
## [46] xml2_1.3.5
## [47] tidyselect_1.2.0
## [48] farver_2.1.1
## [49] beanplot_1.3.1
## [50] base64enc_0.1-3
## [51] BiocFileCache_2.10.0
## [52] illuminaio_0.44.0
## [53] GenomicAlignments_1.38.0
## [54] jsonlite_1.8.7
## [55] multtest_2.58.0
## [56] Formula_1.2-5
## [57] survival_3.5-7
## [58] missMethyl_1.36.0
## [59] tools_4.3.1
## [60] progress_1.2.2
## [61] Rcpp_1.0.11
## [62] glue_1.6.2
## [63] gridExtra_2.3
## [64] SparseArray_1.2.0
## [65] xfun_0.40
## [66] mgcv_1.9-0
## [67] dplyr_1.1.3
## [68] HDF5Array_1.30.0
## [69] withr_2.5.1
## [70] BiocManager_1.30.22
## [71] fastmap_1.1.1
## [72] latticeExtra_0.6-30
## [73] rhdf5filters_1.14.0
## [74] fansi_1.0.5
## [75] openssl_2.1.1
## [76] digest_0.6.33
## [77] R6_2.5.1
## [78] colorspace_2.1-0
## [79] jpeg_0.1-10
## [80] dichromat_2.0-0.1
## [81] biomaRt_2.58.0
## [82] RSQLite_2.3.1
## [83] utf8_1.2.4
## [84] tidyr_1.3.0
## [85] generics_0.1.3
## [86] calibrate_1.7.7
## [87] data.table_1.14.8
## [88] rtracklayer_1.62.0
## [89] htmlwidgets_1.6.2
## [90] prettyunits_1.2.0
## [91] httr_1.4.7
## [92] S4Arrays_1.2.0
## [93] pkgconfig_2.0.3
## [94] gtable_0.3.4
## [95] IlluminaHumanMethylationEPICanno.ilm10b4.hg19_0.6.0
## [96] blob_1.2.4
## [97] siggenes_1.76.0
## [98] htmltools_0.5.6.1
## [99] bookdown_0.36
## [100] ProtGenerics_1.34.0
## [101] scales_1.2.1
## [102] png_0.1-8
## [103] rstudioapi_0.15.0
## [104] knitr_1.44
## [105] tzdb_0.4.0
## [106] rjson_0.2.21
## [107] checkmate_2.2.0
## [108] nlme_3.1-163
## [109] curl_5.1.0
## [110] org.Hs.eg.db_3.18.0
## [111] cachem_1.0.8
## [112] rhdf5_2.46.0
## [113] stringr_1.5.0
## [114] foreign_0.8-85
## [115] AnnotationDbi_1.64.0
## [116] restfulr_0.0.15
## [117] GEOquery_2.70.0
## [118] pillar_1.9.0
## [119] grid_4.3.1
## [120] reshape_0.8.9
## [121] vctrs_0.6.4
## [122] dbplyr_2.3.4
## [123] xtable_1.8-4
## [124] cluster_2.1.4
## [125] htmlTable_2.4.1
## [126] evaluate_0.22
## [127] qqman_0.1.9
## [128] magick_2.8.1
## [129] readr_2.1.4
## [130] GenomicFeatures_1.54.0
## [131] cli_3.6.1
## [132] compiler_4.3.1
## [133] Rsamtools_2.18.0
## [134] rlang_1.1.1
## [135] crayon_1.5.2
## [136] rngtools_1.5.2
## [137] labeling_0.4.3
## [138] nor1mix_1.3-0
## [139] interp_1.1-4
## [140] mclust_6.0.0
## [141] plyr_1.8.9
## [142] stringi_1.7.12
## [143] deldir_1.0-9
## [144] BiocParallel_1.36.0
## [145] munsell_0.5.0
## [146] lazyeval_0.2.2
## [147] Matrix_1.6-1.1
## [148] BSgenome_1.70.0
## [149] hms_1.1.3
## [150] sparseMatrixStats_1.14.0
## [151] bit64_4.0.5
## [152] Rhdf5lib_1.24.0
## [153] KEGGREST_1.42.0
## [154] statmod_1.5.0
## [155] memoise_2.0.1
## [156] bslib_0.5.1
## [157] bit_4.0.5References
Aryee, Martin J, Andrew E Jaffe, Hector Corrada-Bravo, Christine Ladd-Acosta, Andrew P Feinberg, Kasper D Hansen, and Rafael A Irizarry. 2014. “Minfi: a flexible and comprehensive Bioconductor package for the analysis of Infinium DNA methylation microarrays.” Bioinformatics (Oxford, England) 30 (10): 1363–9. https://doi.org/10.1093/bioinformatics/btu049.
Du, Pan, Warren A Kibbe, and Simon M Lin. 2008. “lumi: a pipeline for processing Illumina microarray.” Bioinformatics (Oxford, England) 24 (13): 1547–8. https://doi.org/10.1093/bioinformatics/btn224.