Overview of the MouseGastrulationData datasets
Revised: September 14, 2022
1 Introduction
The MouseGastrulationData package provides convenient access to various -omics datasets from mouse gastrulation and organogeneis.
These datasets are provided in a highly annotated format, so can be used very easily to probe different biological questions, or for methods development.
The primary datasets are the single-cell RNA sequencing (scRNA-seq) datasets from Pijuan-Sala et al. (2019) and Guibentif et al. (n.d.).
These include an atlas of embryonic development (EmbryoAtlasData()) with high sampling density across time, alongside chimaera experiments, that include gene knockouts in an in vivo system.
These Datasets are provided as count matrices with additional feature- and sample-level metadata after processing.
Raw sequencing data can be acquired from ArrayExpress accession E-MTAB-6967 for the atlas.
In addition, the package also provides single-nucleus ATAC-seq data from E8.25 embryos (Pijuan-Sala et al. (2020)), and seqFISH (i.e. spatial transcriptomic) data from E8.5 embryos (Lohoff et al. (2020)).
2 Installation
The package may be installed from Bioconductor. Bioconductor packages can be accessed using the BiocManager package.
if (!requireNamespace("BiocManager", quietly = TRUE))
install.packages("BiocManager")
BiocManager::install("MouseGastrulationData")Bioconductor devel includes the most recent datasets and changes to the package. Instructions for installation of Bioconductor devel are available on their website.
To use the package, load it in the typical way.
library(MouseGastrulationData)3 Processing overview of the scRNA-seq atlas
Detailed methods are available in the methods that accompany the paper, or from the code in the corresponding Github repository. Briefly, whole embryos were dissociated at timepoints between embryonic days (E) 6.5 and 8.5 of development. Libraries were generated using the 10x Genomics Chromium platform (v1 chemistry) and sequenced on the Illumina HiSeq 2500. The computational analysis involved a number of steps:
- Demultiplexing, read alignment and feature quantification was performed with Cellranger using Ensembl 92 genome annotation.
- Swapped molecules were excluded using the
swappedDrops()function from DropletUtils (Griffiths et al. 2018). - Cell-containing droplets were called using the
emptyDrops()function from DropletUtils (Lun et al. 2019). - Called cells with aberrant transcriptional features (e.g., high mitochondrial gene content) were filtered out.
- Size factors were computed using the
computeSumFactors()function from scran (Lun, Bach, and Marioni 2016). - Putative doublets were identified and excluded using the
doubletCells()function from scran. - Cytoplasm-stripped nuclei were also excluded.
- Batch correction was performed in the principal component space with
fastMNN()from scran (Haghverdi et al. 2018). - Clusters were identified using a recursive strategy with
buildSNNGraph()(from scran) andcluster_louvain(from igraph), and were annotated and merged into interpretable units by hand.
4 Atlas data format
The data accessible via this package is stored in subsets according to the different 10x samples that were generated.
For the embryo atlas, the exported object AtlasSampleMetadata provides metadata information for each of the samples.
Descriptions of the contents of each column can be accessed using ?AtlasSampleMetadata.
head(AtlasSampleMetadata, n = 3)## sample stage pool_index seq_batch ncells
## 1 1 E6.5 1 1 360
## 2 2 E7.5 2 1 356
## 3 3 E7.5 3 1 458All data access functions allow you to select the particular samples you would like to access. By loading only the samples that you are interested in for your particular analysis, you will save time when downloading and loading the data, and also reduce memory consumption on your machine.
4.1 Processed data access
The package provides the dataset in the form of a SingleCellExperiment object.
This section details how you can interact with the object.
We load in only one of the samples from the atlas to reduce memory consumption when compiling this vignette.
sce <- EmbryoAtlasData(samples = 21)
sce## class: SingleCellExperiment
## dim: 29452 4651
## metadata(0):
## assays(1): counts
## rownames(29452): ENSMUSG00000051951 ENSMUSG00000089699 ...
## ENSMUSG00000096730 ENSMUSG00000095742
## rowData names(2): ENSEMBL SYMBOL
## colnames(4651): cell_52466 cell_52467 ... cell_57115 cell_57116
## colData names(17): cell barcode ... colour sizeFactor
## reducedDimNames(2): pca.corrected umap
## mainExpName: NULL
## altExpNames(0):We use the counts() function to retrieve the count matrix.
These are stored as a sparse matrix, as implemented in the Matrix package.
counts(sce)[6:9, 1:3]## 4 x 3 sparse Matrix of class "dgTMatrix"
## cell_52466 cell_52467 cell_52468
## ENSMUSG00000104328 . . .
## ENSMUSG00000033845 6 8 10
## ENSMUSG00000025903 . . .
## ENSMUSG00000104217 . . .Size factors for normalisation are present in the object and are accessed with the sizeFactors() function.
head(sizeFactors(sce))## [1] 0.8845695 1.4688375 1.2512019 0.8287969 1.3668086 0.9247460After running scuttle’s logNormCounts function on the SingleCellExperiment object, normalised or log-transformed counts can be accessed using logcounts (or, if log=FALSE, normcounts).
These are not demonstrated in this vignette to avoid a dependency on scuttle.
The MGI symbol and Ensembl gene ID for each gene is stored in the rowData of the SingleCellExperiment object.
All of this data was processed with Ensembl 92 annotation.
head(rowData(sce))## DataFrame with 6 rows and 2 columns
## ENSEMBL SYMBOL
## <character> <character>
## ENSMUSG00000051951 ENSMUSG00000051951 Xkr4
## ENSMUSG00000089699 ENSMUSG00000089699 Gm1992
## ENSMUSG00000102343 ENSMUSG00000102343 Gm37381
## ENSMUSG00000025900 ENSMUSG00000025900 Rp1
## ENSMUSG00000025902 ENSMUSG00000025902 Sox17
## ENSMUSG00000104328 ENSMUSG00000104328 Gm37323The colData contains cell-specific attributes.
The meaning of each field is detailed in the function documentation (?EmbryoAtlasData).
head(colData(sce))## DataFrame with 6 rows and 17 columns
## cell barcode sample pool stage
## <character> <character> <integer> <integer> <character>
## cell_52466 cell_52466 AAACATACACGGAG 21 17 mixed_gastrulation
## cell_52467 cell_52467 AAACATACCCAACA 21 17 mixed_gastrulation
## cell_52468 cell_52468 AAACATACTTGCGA 21 17 mixed_gastrulation
## cell_52469 cell_52469 AAACATTGATCGGT 21 17 mixed_gastrulation
## cell_52470 cell_52470 AAACATTGCTTATC 21 17 mixed_gastrulation
## cell_52471 cell_52471 AAACATTGGTTCGA 21 17 mixed_gastrulation
## sequencing.batch theiler doub.density doublet cluster
## <integer> <character> <numeric> <logical> <integer>
## cell_52466 2 TS9-10 0.0315539 FALSE 14
## cell_52467 2 TS9-10 0.1362419 FALSE 3
## cell_52468 2 TS9-10 0.7468976 FALSE 2
## cell_52469 2 TS9-10 0.2704532 FALSE 1
## cell_52470 2 TS9-10 0.2226039 FALSE 19
## cell_52471 2 TS9-10 0.3261519 FALSE 5
## cluster.sub cluster.stage cluster.theiler stripped
## <integer> <integer> <integer> <logical>
## cell_52466 2 5 5 FALSE
## cell_52467 6 12 12 FALSE
## cell_52468 3 3 3 FALSE
## cell_52469 3 1 1 FALSE
## cell_52470 1 5 5 FALSE
## cell_52471 1 4 4 FALSE
## celltype colour sizeFactor
## <character> <character> <numeric>
## cell_52466 Blood progenitors 2 c9a997 0.884569
## cell_52467 ExE ectoderm 989898 1.468838
## cell_52468 Epiblast 635547 1.251202
## cell_52469 Rostral neurectoderm 65A83E 0.828797
## cell_52470 Haematoendothelial p.. FBBE92 1.366809
## cell_52471 Nascent mesoderm C594BF 0.924746Batch-corrected PCA representations of the data are available via the reducedDim function, in the pca.corrected slot.
This representation contains NA values for cells that are doublets, or cytoplasm-stripped nuclei.
A vector of celltype colours (as used in the paper) is also provided in the exported object EmbryoCelltypeColours.
Its use is shown below.
#exclude technical artefacts
singlets <- which(!(colData(sce)$doublet | colData(sce)$stripped))
plot(
x = reducedDim(sce, "umap")[singlets, 1],
y = reducedDim(sce, "umap")[singlets, 2],
col = EmbryoCelltypeColours[colData(sce)$celltype[singlets]],
pch = 19,
xaxt = "n", yaxt = "n",
xlab = "UMAP1", ylab = "UMAP2"
)
If you would like to use spliced/unspliced/ambiguously spliced count matrices for the atlas data, these can be accessed using the get.spliced argument, as shown below.
Spliced count matrices will be stored as separate entries in the assays slot.
sce <- EmbryoAtlasData(samples=21, get.spliced=TRUE)
names(assays(sce))## [1] "counts" "spliced_counts" "unspliced_counts" "ambiguous_counts"4.2 Raw data access
Unfiltered count matrices are also available from MouseGastrulationData.
This refers to count matrices where swapped molecules have been removed but no cells have been called.
They can be obtained using the EmbryoAtlasData() function and are returned as SingleCellExperiment objects.
unfilt <- EmbryoAtlasData(type="raw", samples=c(1:2))
sapply(unfilt, dim)## 1 2
## [1,] 29452 29452
## [2,] 117107 107802These unfiltered matrices may be useful if you want to perform tests of cell-calling analyses, or analyses which use the ambient pool of RNA in 10x samples. Note that empty columns are excluded from these matrices.
5 Chimera data information
5.1 Background
Data from experiments involving chimeric embryos in Pijuan-Sala et al. (2019) and Guibentif et al. (n.d.) are also available from this package. In these embryos, a population of fluorescent embryonic stem cells were injected into wild-type E3.5 mouse embryos. The embryos were then returned to a parent mouse, and allowed to develop normally until collection. The cells were flow-sorted to purify host and injected populations, libraries were generated using 10x version 2 chemistry and sequencing was performed on the HiSeq 4000.
Chimeras are especially effective for studying the effect of knockouts of essential developmental genes. We inject stem cells that possess a knockout of a particular gene, and allow the resulting chimeric embryo to develop. Both injected and host cells contribute to the different tissues in the mouse. The presence of the wild-type host cells allows the embryo to compensate and avoid gross developmental failures, while cells with the knockout are also captured, and their aberrant behaviour can be studied.
5.2 Available datasets
The package contains three chimeric datasets:
- Wild-type chimeras involving ten samples, from five independant embryo pools at two timepoints.
The injected wild-type cells differ only in the insertion of the td-Tomato construct.
These data are useful for identifying properties of a typical chimera in scRNAseq data.
Raw sequencing data are available at E-MTAB-7324 for samples 1-6, and E-MTAB-8812 for samples 7-10.
The data can be accessed using the
WTChimeraData()function. - Tal1 knockout chimeras involving four samples, from one embryo pool at one timepoint.
The injected cells in the Tal1 chimeras have knockouts for the Tal1 gene.
They also contain the td-Tomato construct.
Raw sequencing data are available at E-MTAB-7325.
The data can be accessed using the
Tal1ChimeraData()function. - T (Brachyury) knockout chimeras involving sixteen samples, from eight embryo pools at two timepoints.
The injected cells in the T chimeras have knockouts for the T gene.
They also contain the td-Tomato construct.
Raw sequencing data are available at E-MTAB-8811.
The data can be accessed using the
TChimeraData()function.
The processed data for each experiment are provided as a SingleCellExperiment, as for the previously described atlas data.
However, there are a few small differences:
- They contain an extra feature for expression of the td-Tomato.
- Cells derived from the injected cells (and thus are positive for td-Tomato) are marked in the
colDatafieldtomato. - Information for the proper pairing of samples from the same embryo pools can be found in the
colDatafieldpool. - Spliced count matrices are not provided.
There may also be additional columns in the cell metadata for individual experiments, the meanings of which are described in the help pages for each function. Unfiltered count matrices are also provided for each sample in these datasets.
6 snATAC-seq data information
Data from Pijuan-Sala et al. (2020) is available in this package in the BPSATACData() function.
As the package authors were not involved in this study, we leave it to users to familiarise themselves with the methods used in that paper, linked here.
Because this data is measured in units of open chromatin, its format is quite different to the other datasets, so it is advised to consult the manual page for the function for more information.
Raw sequencing data is available at GEO accession GSE133244.
7 seqFISH data information
Data from Lohoff et al. (2020) is available in this package in the LohoffSeqFISHData() function.
Methods for the generation of this data may be found in their biorXiv submission.
This data is provided as a SpatialExperiment object.
This includes the locations of individual RNA molecules within cells, and also segmentation masks for each cell.
Segmentation masks were determined from cell membrane staining, not from simple distance-to-nuclei methods, which is a unique aspect of this dataset (at the time of its publication).
See the function manual page for information on how this data is delivered.
8 10X multiome data information
Data from Argelaguet et al. (2022) is available in the RAMultiomeData() function.
This dataset contains both RNA expression and chromatin accessibility data from the same cells, from gastrulation embryos of various timepoints.
ATAC-seq data is available via a gene promoter accessibility score (altExp(sce, "TSS_gene_score")) and genome-wide peak presence (altExp(sce, "ATAC_peak_counts")).
The way altExps work is that these are themselves SingleCellExperiment objects, with identical colData to the main SingleCellExperiment object.
Check the documentation for RAMultiomeData() for more information on the contents of each matrix.
Similarly to the main atlas, metadata for each sample is available using RASampleMetadata.
9 Accessory data information
Some additional data is provided that is specific to analyses performed in individual publications whose data is in this package.
At the moment, the only example of this is GuibentifExtraData(), which downloads somitogenesis trajectory information and NMP orderings for Guibentif et al. (n.d.).
10 Working with the data outside of Bioconductor and R
A user might want to use these data outside of the Bioconductor framework in which it is provided from this package.
Fortunately, there are several packages available for R that facilitate this.
In my experience, zellkonverter is by far the best approach for creating h5ad files for use with (scanpy.
An alternative is to use the LoomExperiment* package to create .loom files.
You could instead use loomR, which is available through Github.
Seurat has a function as.Seurat to directly convert SingleCellExperiment files directly to Seurat-friendly objects.
In any case, it is likely that this package is the easiest way to access the mouse gastrulation datasets, regardless of how you wish to analyse it downstream.
11 Session Information
sessionInfo()## R version 4.3.0 RC (2023-04-13 r84269)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 22.04.2 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.17-bioc/R/lib/libRblas.so
## LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_GB LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## time zone: America/New_York
## tzcode source: system (glibc)
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] MouseGastrulationData_1.14.0 SpatialExperiment_1.10.0
## [3] SingleCellExperiment_1.22.0 SummarizedExperiment_1.30.0
## [5] Biobase_2.60.0 GenomicRanges_1.52.0
## [7] GenomeInfoDb_1.36.0 IRanges_2.34.0
## [9] S4Vectors_0.38.0 BiocGenerics_0.46.0
## [11] MatrixGenerics_1.12.0 matrixStats_0.63.0
## [13] BiocStyle_2.28.0
##
## loaded via a namespace (and not attached):
## [1] DBI_1.1.3 bitops_1.0-7
## [3] rlang_1.1.0 magrittr_2.0.3
## [5] compiler_4.3.0 RSQLite_2.3.1
## [7] DelayedMatrixStats_1.22.0 png_0.1-8
## [9] vctrs_0.6.2 crayon_1.5.2
## [11] pkgconfig_2.0.3 fastmap_1.1.1
## [13] dbplyr_2.3.2 magick_2.7.4
## [15] XVector_0.40.0 ellipsis_0.3.2
## [17] scuttle_1.10.0 utf8_1.2.3
## [19] promises_1.2.0.1 rmarkdown_2.21
## [21] purrr_1.0.1 bit_4.0.5
## [23] xfun_0.39 zlibbioc_1.46.0
## [25] cachem_1.0.7 beachmat_2.16.0
## [27] jsonlite_1.8.4 blob_1.2.4
## [29] highr_0.10 later_1.3.0
## [31] rhdf5filters_1.12.0 DelayedArray_0.26.0
## [33] Rhdf5lib_1.22.0 BiocParallel_1.34.0
## [35] interactiveDisplayBase_1.38.0 parallel_4.3.0
## [37] R6_2.5.1 bslib_0.4.2
## [39] limma_3.56.0 jquerylib_0.1.4
## [41] Rcpp_1.0.10 bookdown_0.33
## [43] knitr_1.42 R.utils_2.12.2
## [45] httpuv_1.6.9 Matrix_1.5-4
## [47] tidyselect_1.2.0 yaml_2.3.7
## [49] codetools_0.2-19 curl_5.0.0
## [51] lattice_0.21-8 tibble_3.2.1
## [53] withr_2.5.0 shiny_1.7.4
## [55] KEGGREST_1.40.0 BumpyMatrix_1.8.0
## [57] evaluate_0.20 BiocFileCache_2.8.0
## [59] Biostrings_2.68.0 ExperimentHub_2.8.0
## [61] pillar_1.9.0 BiocManager_1.30.20
## [63] filelock_1.0.2 generics_0.1.3
## [65] RCurl_1.98-1.12 BiocVersion_3.17.1
## [67] sparseMatrixStats_1.12.0 xtable_1.8-4
## [69] glue_1.6.2 tools_4.3.0
## [71] AnnotationHub_3.8.0 locfit_1.5-9.7
## [73] rhdf5_2.44.0 grid_4.3.0
## [75] DropletUtils_1.20.0 AnnotationDbi_1.62.0
## [77] edgeR_3.42.0 GenomeInfoDbData_1.2.10
## [79] HDF5Array_1.28.0 cli_3.6.1
## [81] rappdirs_0.3.3 fansi_1.0.4
## [83] dplyr_1.1.2 R.methodsS3_1.8.2
## [85] sass_0.4.5 digest_0.6.31
## [87] dqrng_0.3.0 rjson_0.2.21
## [89] memoise_2.0.1 htmltools_0.5.5
## [91] R.oo_1.25.0 lifecycle_1.0.3
## [93] httr_1.4.5 mime_0.12
## [95] bit64_4.0.5References
Argelaguet, Ricard, Tim Lohoff, Jingyu Gavin Li, Asif Nakhuda, Deborah Drage, Felix Krueger, Lars Velten, Stephen J. Clark, and Wolf Reik. 2022. “Decoding gene regulation in the mouse embryo using single-cell multi-omics.” bioRxiv, 2022.06.15.496239. https://doi.org/10.1101/2022.06.15.496239.
Griffiths, J. A., A. C. Richard, K. Bach, A. T. L. Lun, and J. C. Marioni. 2018. “Detection and removal of barcode swapping in single-cell RNA-seq data.” Nat Commun 9 (1): 2667.
Guibentif, Carolina, Jonathan A. Griffiths, Ivan Imaz-Rosshandler, Shila Ghazanfar, Jennifer Nichols, Valerie Wilson, Berthold Göttgens, and John C. Marioni. n.d. “Diverse Routes Towards Early Somites in the Mouse Embryo.” Dev. Cell.
Haghverdi, L., A. T. L. Lun, M. D. Morgan, and J. C. Marioni. 2018. “Batch effects in single-cell RNA-sequencing data are corrected by matching mutual nearest neighbors.” Nat. Biotechnol. 36 (5): 421–27.
Lohoff, T., S. Ghazanfar, A. Missarova, N. Koulena, N. Pierson, J. A. Griffiths, E. S. Bardot, et al. 2020. “Highly Multiplexed Spatially Resolved Gene Expression Profiling of Mouse Organogenesis.” bioRxiv, November, 2020.11.20.391896. https://doi.org/10.1101/2020.11.20.391896.
Lun, A. T., K. Bach, and J. C. Marioni. 2016. “Pooling across cells to normalize single-cell RNA sequencing data with many zero counts.” Genome Biol. 17 (April): 75.
Lun, A. T. L., S. Riesenfeld, T. Andrews, T. P. Dao, T. Gomes, and J. C. Marioni. 2019. “EmptyDrops: distinguishing cells from empty droplets in droplet-based single-cell RNA sequencing data.” Genome Biol. 20 (1): 63.
Pijuan-Sala, Blanca, Jonathan A. Griffiths, Carolina Guibentif, Tom W. Hiscock, Wajid Jawaid, Fernando J. Calero-Nieto, Carla Mulas, et al. 2019. “A Single-Cell Molecular Map of Mouse Gastrulation and Early Organogenesis.” Nature 566 (7745): 490–95. https://doi.org/10.1038/s41586-019-0933-9.
Pijuan-Sala, Blanca, Nicola K. Wilson, Jun Xia, Xiaomeng Hou, Rebecca L. Hannah, Sarah Kinston, Fernando J. Calero-Nieto, et al. 2020. “Single-Cell Chromatin Accessibility Maps Reveal Regulatory Programs Driving Early Mouse Organogenesis.” Nature Cell Biology 22 (4): 487–97. https://doi.org/10.1038/s41556-020-0489-9.