1 Introduction

rprimer provides tools for designing degenerate oligos (primers and probes) for sequence variable targets, such as RNA viruses. A multiple DNA sequence alignment is used as input data, and the outputs are presented in data frame format and as dashboard-like plots. The aim of the package is to provide a visual and efficient approach to degenerate oligo design, where sequence conservation analysis forms the basis for the design process.

In this vignette, I describe and demonstrate the use of the package by designing broadly reactive primers and probes for reverse transcription (RT) polymerase chain reaction (PCR)-based amplification and detection of hepatitis E virus (HEV), a sequence variable RNA virus and a common foodborne pathogen.

2 Installation

To install rprimer, start R (version 4.2.0 or higher), and enter the following code:

if (!requireNamespace("BiocManager", quietly = TRUE))
    install.packages("BiocManager")
BiocManager::install("rprimer")

For best functionality, it is also recommended to install the Biostrings package [1]:

BiocManager::install("Biostrings")

3 Overview

The oligo and assay design workflow consists of five functions:

consensusProfile()
designOligos()
designAssays()
checkMatch()
plotData()

4 Shiny application

The package can be run through a Shiny application (a graphical user interface). To start the application, type runRprimerApp() from within R upon installing and attaching the package.

5 Workflow

library(rprimer)
library(Biostrings)

5.1 Collection of target sequences and multiple alignment

The first step is to identify and align target sequences of interest. It is important that the alignment does not contain any poorly aligned sequences and accurately represents the generic variation of the target population.

The file “example_alignment.txt” is provided with the package and contains an alignment of 50 HEV sequences. The file path can be retrieved by:

system.file("extdata", "example_alignment.txt", package = "rprimer")

5.2 Data import

The alignment must be imported to R using the readDNAMultipleAlignment() function from Biostrings [1]. The input file can contain from one to several thousand sequences.

Below, I show how to import the file “example_alignment.txt”:

filepath <- system.file("extdata", "example_alignment.txt", package = "rprimer")

myAlignment <- readDNAMultipleAlignment(filepath, format = "fasta")

For some applications, there is often an interest in amplifying a specific region of the genome. In such cases, the alignment can be masked so that only the desired oligo binding regions are available for the subsequent design process. This type of masking can be achieved by using colmask() from Biostrings [1], as illustrated in the example below:

## Mask everything but position 3000 to 4000 and 5000 to 6000
myMaskedAlignment <- myAlignment

colmask(myMaskedAlignment, invert = TRUE) <- c(3000:4000, 5000:6000)

It is also possible to mask specific sequences by using rowmask(). Gap-rich positions can be hidden with gapmask() [1].

5.3 Design procedure

5.3.1 Step 1: `consensusProfile`

Once the alignment is imported, a consensus profile can be generated. The consensus profile contains all the information needed for the subsequent design process:

Proportion of the letters A, C, G, T, and other
Proportion of gaps (-)
Majority consensus base
Identity
IUPAC consensus character
Coverage

The majority consensus base is the most frequently occurring letter among the letters A, C, G, T and -.

Identity represents the proportion of sequences, among all sequences with a DNA base (A, C, G, T) or gap (-) that has the majority consensus base.

The IUPAC consensus character includes all DNA bases that occur at a relative frequency higher than a user-specified ambiguity threshold. The threshold can range from 0 to 0.2: a value of 0 (default) will catch all the variation, but with the potential downside of generating oligos with high degeneracy. A higher value will capture most of the variation, but with the potential downside of missing less common sequence variants.

Coverage represents the proportion of sequences in the target alignment (among all sequences with a DNA base) that are covered by the IUPAC consensus character.

consensusProfile() has two arguments:

x: a MultipleDNAAlignment object (see Data import)
ambiguityThreshold: position wise “detection level” for ambiguous bases. All DNA bases that occur with a proportion higher than the specified value will be included in the IUPAC consensus character. Defaults to 0, can range from 0 to 0.2

Type the following code to generate a consensus profile from the example alignment below:

myConsensusProfile <- consensusProfile(myAlignment, ambiguityThreshold = 0.05)

Results (row 100-105):

position	a	c	g	t	other	majority	identity	iupac	coverage
100	0.00	1.00	0.00	0.00	0.00	C	1.00	C	1.00
101	1.00	0.00	0.00	0.00	0.00	A	1.00	A	1.00
102	0.16	0.00	0.84	0.00	0.00	G	0.84	R	1.00
103	0.00	0.00	1.00	0.00	0.00	G	1.00	G	1.00
104	0.00	0.98	0.00	0.00	0.02	C	1.00	C	1.00
105	0.20	0.00	0.02	0.78	0.00	T	0.78	W	0.98

The results can be visualized by using plotData():

plotData(myConsensusProfile)

The dots represent the value at each position, and the black lines show centered running averages. High identity values (in combination with low gap values) indicate high sequence conservation.

The data can be explored in more detail by zooming into a specific region of interest:

## Select position 5000 to 5800 in the consensus profile 
selection <- myConsensusProfile[
  myConsensusProfile$position >= 5000 & myConsensusProfile$position <= 5800, 
  ]

plotData(selection)

5.3.2 Step 2: `designOligos`

The next step is to design oligos. Primers must be designed, and probes are optional. Primers can be generated by using two strategies:

The ambiguous strategy (default) generates primers from the IUPAC consensus sequence alone, which means that ambiguous bases can occur at any position in the primer
The mixed strategy generates primers from both the majority and IUPAC consensus sequence. These primers consist of a shorter degenerate part at the 3’ end (~1/3 of the primer, targeting a conserved region) and a longer consensus part at the 5’ end (~2/3 of the primer), which instead of having ambiguous bases, contains the most frequently occuring nucleotide at each position. This strategy resembles the widely used Consensus-Degenerate Hybrid Oligonucleotide Primer (CODEHOP) principle [2]. It aims to allow amplification of highly variable targets using primers with low degeneracy. The idea is that the degenerate 3’ end will bind specifically to the target sequence in the initial PCR cycles and promote amplification despite eventual mismatches at the 5’ consensus part (since 5’ end mismatches are generally less detrimental than 3’ end mismatches) [2]. In this way, the generated products will perfectly match the 5’ ends of all primers, allowing them to be efficiently amplified in later PCR cycles. To provide a sufficiently high melting temperature (tm) with eventual 5’ end mismatches, it is recommended to design relatively long primers (at least 25 bases) when using this strategy

Probes are always designed using the ambiguous strategy.

designOligos() has several arguments (design settings):

x: the consensus profile from Step 1
maxGapFrequency: maximum gap frequency (in the alignment) for primers and probes, defaults to 0.01
lengthPrimer: primer length range, defaults to c(18, 22)
maxDegeneracyPrimer: maximum degeneracy for primers, defaults to 4
gcClampPrimer: if primers should have a GC clamp, defaults to TRUE. A GC clamp is identified as two to three G or C:s within the last five bases (3’ end) of the primer. The presence of a GC clamp is thought to promote specific binding of the 3’ end
avoidThreeEndRunsPrimer: if primers with more than two runs of the same nucleotide at the terminal 3’ end should be avoided (to reduce the risk of mispriming), defaults to TRUE
gcPrimer: GC-content range of primers, defaults to c(0.40, 0.65)
tmPrimer: melting temperature range for primers (in Celsius degrees), defaults to c(55, 65). Melting temperatures are calculated for perfectly matching oligo-target duplexes using the nearest neighbor method [3], using the formula, salt correction method, and table values as described in [4]. See the manual (?oligos) for more information
concPrimer: primer concentration in nM, defaults to 500 (for tm calculation)
designStrategyPrimer: design strategy for primers, "ambiguous" or "mixed", defaults to "ambiguous"
probe: if probes should be designed, defaults to TRUE
lengthProbe: defaults to c(18, 22)
maxDegeneracyProbe: defaults to 4
avoidFiveEndGProbe: if probes with a G at the terminal 5’ end should be avoided (to prevent quenching of the 5’ flourophore of hydrolysis probes), defaults to TRUE
gcProbe: defaults to c(0.40, 0.65)
tmProbe: defaults to c(55, 70)
concProbe: defaults to 250
concNa: sodium ion (equivalent) concentration in the PCR reaction (in M), defaults to 0.05 (50 mM) (for calculation of tm and delta G)

All sequence variants of an oligo must fulfill all specified design constraints to be considered.

Oligos with at least one sequence variant containing more than four consecutive runs of the same nucleotide (e.g. “AAAAA”) and/or more than three consecutive runs of the same di-nucleotide (e.g. “TATATATA”) are not considered.

An error message will return if no oligos are found. If so, a good idea could be to re-run the process from Step 1 and increase the ambiguityThreshold in consensusProfile(), and/or relax the design constraints above.

5.3.2.1 Design with default settings

Enter the following code to design oligos with default settings:

myOligos <- designOligos(myConsensusProfile)

Results (first five rows):

type	fwd	rev	start	end	length	iupacSequence	iupacSequenceRc	identity	coverage	degeneracy	gcContentMean	gcContentRange	tmMean	tmRange	deltaGMean	deltaGRange	sequence	sequenceRc	gcContent	tm	deltaG	method	score	roiStart	roiEnd
probe	TRUE	TRUE	124	143	20	TCYGCCYTGGCGAATGCTGT	ACAGCATTCGCCARGGCRGA	0.95	0.99	4	0.60	0.10	63.17	4.33	-21.61	2.08	TCCGCCCT….	ACAGCATT….	0.65, 0…..	65.33623….	-22.6538….	ambiguous	2	1	7597
probe	FALSE	TRUE	127	146	20	GCCYTGGCGAATGCTGTGGT	ACCACAGCATTCGCCARGGC	0.98	0.99	2	0.62	0.05	63.18	1.84	-21.73	0.83	GCCCTGGC….	ACCACAGC….	0.65, 0.6	64.10586….	-22.1475….	ambiguous	3	1	7597
primer	TRUE	FALSE	128	146	19	CCYTGGCGAATGCTGTGGT	ACCACAGCATTCGCCARGG	0.97	0.99	2	0.61	0.05	61.48	1.95	-19.84	0.83	CCCTGGCG….	ACCACAGC….	0.631578….	62.45335….	-20.2570….	ambiguous	3	1	7597
primer	TRUE	FALSE	128	147	20	CCYTGGCGAATGCTGTGGTR	YACCACAGCATTCGCCARGG	0.96	0.99	4	0.60	0.10	61.61	3.37	-20.55	1.76	CCCTGGCG….	TACCACAG….	0.6, 0.5….	61.77166….	-20.5089….	ambiguous	2	1	7597
probe	TRUE	TRUE	128	146	19	CCYTGGCGAATGCTGTGGT	ACCACAGCATTCGCCARGG	0.97	0.99	2	0.61	0.05	60.45	1.94	-19.84	0.83	CCCTGGCG….	ACCACAGC….	0.631578….	61.41686….	-20.2570….	ambiguous	3	1	7597

The manual (?designOligos) contains a detailed description of each variable. However, what may not be completely self-explanatory is that some variables (e.g. sequence gcContent and tm) can hold several values in each entry. For such variables, all values within a specific row can be retrieved by:

myOligos$sequence[[1]] ## All sequence variants of the first oligo (i.e., first row) 
#> [1] "TCCGCCCTGGCGAATGCTGT" "TCTGCCCTGGCGAATGCTGT" "TCCGCCTTGGCGAATGCTGT"
#> [4] "TCTGCCTTGGCGAATGCTGT"
myOligos$gcContent[[1]] ## GC-content of all variants of the first oligo 
#> [1] 0.65 0.60 0.60 0.55
myOligos$tm[[1]] ## Tm of all variants of the first oligo 
#> [1] 65.33624 62.86736 63.47792 61.00290

The primer and probe candidates can be visualized using plotData():

plotData(myOligos)

5.3.2.2 Design with modified settings, and mixed primers

Next, I show how to design mixed primers using the dataset where I masked all positions but 3000 to 4000 and 5000 to 6000. In this case, I select to not design probes. I also select to modify some of the other settings.

## I first need to make a consensus profile of the masked alignment 
myMaskedConsensusProfile <- consensusProfile(myMaskedAlignment, ambiguityThreshold = 0.05)

myMaskedMixedPrimers <- designOligos(myMaskedConsensusProfile,
                                     maxDegeneracyPrimer = 8,
                                     lengthPrimer = c(24:28),
                                     tmPrimer = c(65,70),
                                     designStrategyPrimer = "mixed", 
                                     probe = FALSE)

plotData(myMaskedMixedPrimers)

Importantly, for mixed primers, identity refers to the average identity within the 5’ consensus part of the primer binding region, and coverage refers to the average coverage of the 3’ degenerate part of the primer. Conversely, for ambiguous primers (and probes), both of these values are calculated for the oligo as a whole. For a detailed explanation of identity and coverage, see Step 1.

5.3.2.3 Scoring system

All valid oligos are scored based on their average identity, coverage, and GC-content. The score can range from 0 to 9, where 0 is considered best. The manual (?designOligos) contains more information on the scoring system.

The best scoring oligos can be retrieved as follows:

## Get the minimum score from myOligos 
bestOligoScore <- min(myOligos$score)
bestOligoScore
#> [1] 0

## Make a subset that only oligos with the best score are included 
oligoSelection <- myOligos[myOligos$score == bestOligoScore, ]

5.3.2.4 Visualize oligo binding regions

It is possible to select a specific oligo and plot the nucleotide distribution within the binding region, by subsetting the consensus profile from Step 1:

## Get the binding region of the first oligo in the selection above (first row): 
bindingRegion <- myConsensusProfile[
  myConsensusProfile$position >= oligoSelection[1, ]$start & 
    myConsensusProfile$position <= oligoSelection[1, ]$end,
  ]

To plot the binding region, we can add type = "nucleotide":

plotData(bindingRegion, type = "nucleotide")

The binding region can be plotted in forward direction as above, or as a reverse complement, by specifying rc = TRUE.

5.3.3 Step 3: `designAssays`

The final step is to find pairs of forward and reverse primers, and eventually, to combine them with probes. If probes are present in the input dataset, only assays with a probe located between the primer pair will be kept.

designAssays() has four arguments:

x: the oligo dataset from Step 2
length: amplicon length range, defaults to c(65, 120)
tmDifferencePrimers: maximum allowed difference between the mean tm of the forward and reverse primer (in Celsius degrees). Defaults to NULL, which means that primers will be paired regardless of their tm.111 Note that the strategy of matching primer tm is flawed. What in reality is of interest is the amount of primer bound at the annealing temperature (ta). A PCR is most efficient if the two primers hybridize to the target at the same extent at the ta. See [5] for details on how to calculate the proportion of hybridized primer at different temperatures.

An error message will return if no assays are found.

Below, I show how to design assays using default settings using the dataset myOligos from Step 2:

myAssays <- designAssays(myOligos)

Output (first five rows):

start	end	length	totalDegeneracy	score	startFwd	endFwd	lengthFwd	iupacSequenceFwd	identityFwd	coverageFwd	degeneracyFwd	gcContentMeanFwd	gcContentRangeFwd	tmMeanFwd	tmRangeFwd	deltaGMeanFwd	deltaGRangeFwd	sequenceFwd	gcContentFwd	tmFwd	deltaGFwd	methodFwd	startRev	endRev	lengthRev	iupacSequenceRev	identityRev	coverageRev	degeneracyRev	gcContentMeanRev	tmMeanRev	tmRangeRev	deltaGMeanRev	deltaGRangeRev	sequenceRev	gcContentRev	tmRev	deltaGRev	methodRev	plusPr	minusPr	startPr	endPr	lengthPr	iupacSequencePr	iupacSequenceRcPr	identityPr	coveragePr	degeneracyPr	gcContentMeanPr	gcContentRangePr	tmMeanPr	tmRangePr	deltaGMeanPr	deltaGRangePr	sequencePr	sequenceRcPr	gcContentPr	tmPr	deltaGPr	methodPr	roiStart	roiEnd
5605	5673	69	6	2.00	5605	5624	20	GGCRGTGGTTTCTGGGGTGA	0.98	1	2	0.62	0.05	62.84	2.51	-20.86	1.25	GGCAGTGG….	0.6, 0.65	61.57995….	-20.2350….	ambiguous	5654	5673	20	GTTGGTTGGATGAASATAGG	1	1	2	0.4	50.71	1.1	-15.27	0.52	GTTGGTTG….	0.4, 0.4	50.15469….	-15.0078….	ambiguous	TRUE	FALSE	5625	5642	18	CMGGGTTGATTCTCAGCC	GGCTGAGAATCAACCCKG	0.97	0.99	2	0.58	0.06	55.14	2.79	-17.06	1.25	CAGGGTTG….	GGCTGAGA….	0.555555….	53.74554….	-16.4324….	ambiguous	1	7597
5605	5673	69	6	2.33	5605	5624	20	GGCRGTGGTTTCTGGGGTGA	0.98	1	2	0.62	0.05	62.84	2.51	-20.86	1.25	GGCAGTGG….	0.6, 0.65	61.57995….	-20.2350….	ambiguous	5654	5673	20	GTTGGTTGGATGAASATAGG	1	1	2	0.4	50.71	1.1	-15.27	0.52	GTTGGTTG….	0.4, 0.4	50.15469….	-15.0078….	ambiguous	TRUE	FALSE	5625	5643	19	CMGGGTTGATTCTCAGCCC	GGGCTGAGAATCAACCCKG	0.97	0.99	2	0.61	0.05	57.63	2.64	-18.54	1.25	CAGGGTTG….	GGGCTGAG….	0.578947….	56.30713….	-17.9185….	ambiguous	1	7597
5605	5673	69	6	2.00	5605	5624	20	GGCRGTGGTTTCTGGGGTGA	0.98	1	2	0.62	0.05	62.84	2.51	-20.86	1.25	GGCAGTGG….	0.6, 0.65	61.57995….	-20.2350….	ambiguous	5654	5673	20	GTTGGTTGGATGAASATAGG	1	1	2	0.4	50.71	1.1	-15.27	0.52	GTTGGTTG….	0.4, 0.4	50.15469….	-15.0078….	ambiguous	TRUE	TRUE	5625	5644	20	CMGGGTTGATTCTCAGCCCT	AGGGCTGAGAATCAACCCKG	0.97	1.00	2	0.58	0.05	58.87	2.55	-19.43	1.25	CAGGGTTG….	AGGGCTGA….	0.55, 0.6	57.59836….	-18.8035….	ambiguous	1	7597
5605	5673	69	6	1.67	5605	5624	20	GGCRGTGGTTTCTGGGGTGA	0.98	1	2	0.62	0.05	62.84	2.51	-20.86	1.25	GGCAGTGG….	0.6, 0.65	61.57995….	-20.2350….	ambiguous	5654	5673	20	GTTGGTTGGATGAASATAGG	1	1	2	0.4	50.71	1.1	-15.27	0.52	GTTGGTTG….	0.4, 0.4	50.15469….	-15.0078….	ambiguous	TRUE	TRUE	5625	5645	21	CMGGGTTGATTCTCAGCCCTT	AAGGGCTGAGAATCAACCCKG	0.98	1.00	2	0.55	0.05	59.21	2.43	-20.08	1.25	CAGGGTTG….	AAGGGCTG….	0.523809….	57.99472….	-19.4553….	ambiguous	1	7597
5605	5673	69	6	2.00	5605	5624	20	GGCRGTGGTTTCTGGGGTGA	0.98	1	2	0.62	0.05	62.84	2.51	-20.86	1.25	GGCAGTGG….	0.6, 0.65	61.57995….	-20.2350….	ambiguous	5654	5673	20	GTTGGTTGGATGAASATAGG	1	1	2	0.4	50.71	1.1	-15.27	0.52	GTTGGTTG….	0.4, 0.4	50.15469….	-15.0078….	ambiguous	TRUE	FALSE	5625	5646	22	CMGGGTTGATTCTCAGCCCTTC	GAAGGGCTGAGAATCAACCCKG	0.98	0.99	2	0.57	0.05	59.91	2.28	-21.11	1.25	CAGGGTTG….	GAAGGGCT….	0.545454….	58.77533….	-20.4881….	ambiguous	1	7597

The output contains many columns, but you can get an overview by calling View(as.data.frame(myAssays)) if you are working in RStudio. Again, the results can be visualized using plotData():

plotData(myAssays)

There are now over 1000 assays, but we can reduce the number by filtering the dataset. In the example below, I select to subset the assays based on their average oligo score (see the score variable in the table above), and only keep those with the best score.

The best possible average score is 0 and the worst is 9 (see Step 2 for more information).

## Get the minimum (best) score from myAssays
bestAssayScore <- min(myAssays$score)
bestAssayScore
#> [1] 0.6666667

## Make a subset that only contains the assays with the best score 
myAssaySelection <- myAssays[myAssays$score == bestAssayScore, ]

5.4 Further handling of the data

5.4.1 Oligo and assay binding regions

Oligo and assay binding region(s) can be inspected in more detail by using the consensus profile from Step 1. As an example, I select to take a closer look at the first assay in myAssaySelection from Step 3.

The start and end position of an assay can be retrieved as follows:

from <- myAssaySelection[1, ]$start
to <- myAssaySelection[1, ]$end

It is now possible to indicate the amplicon region, using the highlight argument in plotData():

plotData(myConsensusProfile, highlight = c(from, to))

To get a more detailed view, we can make a subset of the consensus profile to only contain the amplicon region, and plot it:

myAssayRegion <- myConsensusProfile[
  myConsensusProfile$position >= from & 
    myConsensusProfile$position <= to, 
]

plotData(myAssayRegion, type = "nucleotide")

The consensus amplicon sequence is obtained as follows:

paste(myAssayRegion$iupac, collapse = "")
#> [1] "CRGTGGTTTCTGGGGTGACMGGGTTGATTCTCAGCCCTTCGCMMTCCCCTATWTTCATCCAACCAACCC"

5.4.2 Check match

It is often valuable to investigate how the generated oligos match with their target sequences. checkMatch() can be used for this purpose. The function is a wrapper to vcountPDict() from Biostrings [1] and has two arguments:

x: an oligo or assay dataset from Step 2 or 3
target: the target alignment used as input in Step 1

The output gives information on the proportion and names of target sequences that match perfectly and with one, two, three, or four or more mismatches to the oligo within the intended oligo binding region in the alignment (on-target match). It also tells the proportion and names of target sequences that match with a maximum of two mismatches to the oligo outside the intended oligo binding region (off-target match). Thus, be cautious that false negatives (or positives) may occur due to poorly aligned sequences. Moreover, the output does not tell which strand (minus or plus) the oligo matches to, which is important to consider when assessing off-target matches to single-stranded targets. See the manual (?checkMatch) for more information.

Ambiguous bases and gaps in the target sequences will be identified as mismatches.

checkMatch() can be used for both oligo and assay datasets. The function is rather slow, especially if there are many target sequences, so a good idea could be to select only a few oligo or assay candidates to investigate.

Below, I show how to check how the three first candidates of the oligoSelection dataset matches to the sequences in myAlignment:

## Check the first three candidates in the oligoSelection dataset
oligoSelectionMatch <- checkMatch(oligoSelection[1:3, ], target = myAlignment)

Output:

iupacSequence	perfectMatch	idPerfectMatch	oneMismatch	idOneMismatch
GGGTTGATTCTCAGCCCTT	0.9	AB073912….	0.1	AB481228….
GGGTTGATTCTCAGCCCTT	0.9	AB073912….	0.1	AB481228….
GGTTGATTCTCAGCCCTT	0.9	AB073912….	0.1	AB481228….

Note that the id variables can hold several values in each row. All values can be retrieved by:

## Get the id of all sequences that has one mismatch to the first oligo in the input dataset
oligoSelectionMatch$idOneMismatch[[1]] 
#> [1] "AB481228.1" "KJ701409.1" "JQ953665.1" "AB521805.1" "LC042232.1"

The output can be visualized using plotData():

plotData(oligoSelectionMatch)

5.5 Export to file

Before proceeding to wet lab evaluation, it is highly recommended to also evaluate the final primer and probe candidates for 1) the potential to form primer-dimers and hairpin structures, and 2) the potential to (not) cross react with non-targets.

These tasks are best performed by other software. Below, I show how to export results to a file so they can be readily analyzed by other tools.

5.5.1 Result tables

All result tables can be saved to .txt or .csv-files, for instance:

write.csv(myAssays, file = "myAssays.csv", quote = FALSE, row.names = FALSE) 
write.table(myAssays, file = "myAssays.txt", quote = FALSE, row.names = FALSE)

5.5.2 Fasta-format

It is also possible to export oligos and assays in fasta-format. To do this, the object of interest must first be coerced to a DNAStringSet object, as follows:

## Convert the first two oligos 
as(myOligos[1:2, ], "DNAStringSet")
#> DNAStringSet object of length 6:
#>     width seq                                               names               
#> [1]    20 TCCGCCCTGGCGAATGCTGT                              oligo_1_variant_1
#> [2]    20 TCTGCCCTGGCGAATGCTGT                              oligo_1_variant_2
#> [3]    20 TCCGCCTTGGCGAATGCTGT                              oligo_1_variant_3
#> [4]    20 TCTGCCTTGGCGAATGCTGT                              oligo_1_variant_4
#> [5]    20 GCCCTGGCGAATGCTGTGGT                              oligo_2_variant_1
#> [6]    20 GCCTTGGCGAATGCTGTGGT                              oligo_2_variant_2

## Convert the first two assays 
as(myAssays[1:2, ], "DNAStringSet")
#> DNAStringSet object of length 12:
#>      width seq                                              names               
#>  [1]    20 GGCAGTGGTTTCTGGGGTGA                             assay_1_fwd_varia...
#>  [2]    20 GGCGGTGGTTTCTGGGGTGA                             assay_1_fwd_varia...
#>  [3]    20 GGCAGTGGTTTCTGGGGTGA                             assay_2_fwd_varia...
#>  [4]    20 GGCGGTGGTTTCTGGGGTGA                             assay_2_fwd_varia...
#>  [5]    20 CCTATATTCATCCAACCAAC                             assay_1_rev_varia...
#>  ...   ... ...
#>  [8]    20 CCTATTTTCATCCAACCAAC                             assay_2_rev_varia...
#>  [9]    18 CAGGGTTGATTCTCAGCC                               assay_1_pr_variant_1
#> [10]    18 CCGGGTTGATTCTCAGCC                               assay_1_pr_variant_2
#> [11]    19 CAGGGTTGATTCTCAGCCC                              assay_2_pr_variant_1
#> [12]    19 CCGGGTTGATTCTCAGCCC                              assay_2_pr_variant_2

Note that all sequences will be written in the same direction as the input target alignment, and all sequence variants of each oligo will be printed.

The sequences can now be saved in fasta-format by using writeXStringSet() from Biostrings [1].

toFile <- as(myOligos[1:2, ], "DNAStringSet")
writeXStringSet(toFile, file = "myOligos.txt")

6 Summary

The design process as a whole is summarized below.

Using the R console:

library(rprimer)

## Enter the filepath to an alignment with target sequences of interest 
filepath <- system.file("extdata", "example_alignment.txt", package = "rprimer")

## Import the alignment 
myAlignment <- readDNAMultipleAlignment(filepath, format = "fasta") 

## Design primers, probes and assays (modify settings if needed) 
myConsensusProfile <- consensusProfile(myAlignment, ambiguityThreshold = 0.05)
myOligos <- oligos(myConsensusProfile)
myAssays <- assays(myOligos)

## Visualize the results 
plotData(myConsensusProfile)
plotData(myOligos)
plotData(myAssays)

## Show result tables (in RStudio)
View(as.data.frame(myConsensusProfile))
View(as.data.frame(myOligos))
View(as.data.frame(myAssays))

Using the Shiny application:

library(rprimer)

## Start application 
runRprimerApp()

7 Classes and example data

The “Rprimer” classes (RprimerProfile, RprimerOligo, RprimerAssay, RprimerMatchOligo and RprimerMatchAssay) extends the DFrame class from S4Vectors [6], and behave in a similar way as traditional data frames, with methods for [, $, nrow(), ncol(), head(), tail(), rbind(), cbind() etc. They can be coerced to traditional data frames by using as.data.frame().

Example datasets of each class are provided with the package, and are loaded by:

data("exampleRprimerProfile")
data("exampleRprimerOligo")
data("exampleRprimerAssay")
data("exampleRprimerMatchOligo")
data("exampleRprimerMatchAssay")

To provide reproducible examples, I have also included an alignment of class DNAMultipleAlignment. It is loaded by data("exampleRprimerAlignment").

8 Table values

Tables used for determination of complement bases, IUPAC consensus character codes, degeneracy and nearest neighbors can be found by typing:

rprimer:::lookup$complement
rprimer:::lookup$iupac, rprimer:::lookup$degenerates,
rprimer:::lookup$degeneracy and
rprimer:::lookup$nn, respectively.

9 Source code

The source code is available at https://github.com/sofpn/rprimer.

10 Citation

Persson S., Larsson C., Simonsson M., Ellström P. (2022) rprimer: an R/bioconductor package for design of degenerate oligos for sequence variable viruses. BMC Bioinformatics 23:239

11 Session info

This document was generated under the following conditions:

sessionInfo()
#> R version 4.3.0 RC (2023-04-13 r84269)
#> Platform: x86_64-pc-linux-gnu (64-bit)
#> Running under: Ubuntu 22.04.2 LTS
#> 
#> Matrix products: default
#> BLAS:   /home/biocbuild/bbs-3.17-bioc/R/lib/libRblas.so 
#> LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
#> 
#> locale:
#>  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
#>  [3] LC_TIME=en_GB              LC_COLLATE=C              
#>  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
#>  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
#>  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
#> [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
#> 
#> time zone: America/New_York
#> tzcode source: system (glibc)
#> 
#> attached base packages:
#> [1] stats4    stats     graphics  grDevices utils     datasets  methods  
#> [8] base     
#> 
#> other attached packages:
#> [1] Biostrings_2.68.0   GenomeInfoDb_1.36.0 XVector_0.40.0     
#> [4] IRanges_2.34.0      S4Vectors_0.38.0    BiocGenerics_0.46.0
#> [7] rprimer_1.4.0       kableExtra_1.3.4    BiocStyle_2.28.0   
#> 
#> loaded via a namespace (and not attached):
#>  [1] gtable_0.3.3            xfun_0.39               bslib_0.4.2            
#>  [4] ggplot2_3.4.2           mathjaxr_1.6-0          vctrs_0.6.2            
#>  [7] tools_4.3.0             bitops_1.0-7            generics_0.1.3         
#> [10] tibble_3.2.1            fansi_1.0.4             highr_0.10             
#> [13] pkgconfig_2.0.3         webshot_0.5.4           lifecycle_1.0.3        
#> [16] GenomeInfoDbData_1.2.10 farver_2.1.1            compiler_4.3.0         
#> [19] stringr_1.5.0           munsell_0.5.0           httpuv_1.6.9           
#> [22] htmltools_0.5.5         sass_0.4.5              RCurl_1.98-1.12        
#> [25] yaml_2.3.7              later_1.3.0             pillar_1.9.0           
#> [28] crayon_1.5.2            jquerylib_0.1.4         ellipsis_0.3.2         
#> [31] cachem_1.0.7            magick_2.7.4            mime_0.12              
#> [34] tidyselect_1.2.0        rvest_1.0.3             digest_0.6.31          
#> [37] stringi_1.7.12          reshape2_1.4.4          dplyr_1.1.2            
#> [40] bookdown_0.33           labeling_0.4.2          fastmap_1.1.1          
#> [43] grid_4.3.0              colorspace_2.1-0        cli_3.6.1              
#> [46] magrittr_2.0.3          patchwork_1.1.2         utf8_1.2.3             
#> [49] withr_2.5.0             scales_1.2.1            promises_1.2.0.1       
#> [52] rmarkdown_2.21          httr_1.4.5              shiny_1.7.4            
#> [55] evaluate_0.20           knitr_1.42              viridisLite_0.4.1      
#> [58] rlang_1.1.0             Rcpp_1.0.10             xtable_1.8-4           
#> [61] glue_1.6.2              BiocManager_1.30.20     xml2_1.3.3             
#> [64] svglite_2.1.1           rstudioapi_0.14         jsonlite_1.8.4         
#> [67] plyr_1.8.8              R6_2.5.1                systemfonts_1.0.4      
#> [70] zlibbioc_1.46.0

References

1. H. Pagès and P. Aboyoun and R. Gentleman and S. DebRoy. Biostrings: Efficient manipulation of biological strings. 2021. https://bioconductor.org/packages/Biostrings.

2. TM. Rose, ER. Schultz, JG. Henikoff, S. Pietrokovski, CM. McCallum, and S. Henikoff. Consensus-degenerate hybrid oligonucleotide primers for amplification of distantly related sequences. Nucleic acids research. 1998;26:1628–35.

3. J. SantaLucia. A unified view of polymer, dumbbell, and oligonucleotide dna nearest-neighbor thermodynamics. Proceedings of the National Academy of Sciences. 1998;95:1460–5.

4. J. SantaLucia and D. Hicks. The thermodynamics of dna structural motifs. Annu Rev Biophys Biomol Struct. 2004;33:415–40.

5. J. SantaLucia. Physical principles and visual-omp software for optimal pcr design. Springer; 2007.

6. H. Pagès and M. Lawrence and P. Aboyoun. S4Vectors: Foundation of vector-like and list-like containers in bioconductor. 2021. https://bioconductor.org/packages/S4Vectors.

Getting started with rprimer

25 April 2023

Package

Contents

1 Introduction

2 Installation

3 Overview

4 Shiny application

5 Workflow

5.1 Collection of target sequences and multiple alignment

5.2 Data import

5.3 Design procedure

5.3.1 Step 1: `consensusProfile`

5.3.2 Step 2: `designOligos`

5.3.2.1 Design with default settings

5.3.2.2 Design with modified settings, and mixed primers

5.3.2.3 Scoring system

5.3.2.4 Visualize oligo binding regions

5.3.3 Step 3: `designAssays`

5.4 Further handling of the data

5.4.1 Oligo and assay binding regions

5.4.2 Check match

5.5 Export to file

5.5.1 Result tables

5.5.2 Fasta-format

6 Summary

7 Classes and example data

8 Table values

9 Source code

10 Citation

11 Session info

References

Getting started with rprimer

25 April 2023

Package

Contents

1 Introduction

2 Installation

3 Overview

4 Shiny application

5 Workflow

5.1 Collection of target sequences and multiple alignment

5.2 Data import

5.3 Design procedure

5.3.1 Step 1: consensusProfile

5.3.2 Step 2: designOligos

5.3.2.1 Design with default settings

5.3.2.2 Design with modified settings, and mixed primers

5.3.2.3 Scoring system

5.3.2.4 Visualize oligo binding regions

5.3.3 Step 3: designAssays

5.4 Further handling of the data

5.4.1 Oligo and assay binding regions

5.4.2 Check match

5.5 Export to file

5.5.1 Result tables

5.5.2 Fasta-format

6 Summary

7 Classes and example data

8 Table values

9 Source code

10 Citation

11 Session info

References

5.3.1 Step 1: `consensusProfile`

5.3.2 Step 2: `designOligos`

5.3.3 Step 3: `designAssays`