Contents

1 Motivation and Necessity

Genetic variants associated with diseases often affect non-coding regions, thus likely having a regulatory role. To understand the effects of genetic variants in these regulatory regions, identifying genes that are modulated by specific regulatory elements (REs) is crucial. The effect of gene regulatory elements, such as enhancers, is often cell-type specific, likely because the combinations of transcription factors (TFs) that are regulating a given enhancer have cell-type specific activity. This TF activity can be quantified with existing tools such as diffTF and captures differences in binding of a TF in open chromatin regions. Collectively, this forms a enhancer-mediated gene regulatory network (eGRN) with cell-type and data-specific TF-RE and RE-gene links. Here, we reconstruct such a eGRN using bulk RNA-seq and open chromatin (e.g., using ATAC-seq or ChIP-seq for open chromatin marks) and optionally TF activity data. Our network contains different types of links, connecting TFs to regulatory elements, the latter of which is connected to genes in the vicinity or within the same chromatin domain (TAD). We use a statistical framework to assign empirical FDRs and weights to all links using various statistical approaches.

In summary, we present a framework to reconstruct predictive enhancer-mediated regulatory network models that are based on integrating of expression and chromatin accessibility/activity pattern across individuals, and provide a comprehensive resource of cell-type specific gene regulatory networks for particular cell types.

For the latest version of the paper, see the References.

2 Installation

2.1 GRaNIE package and required dependency packages

GRaNIE is available on Bioconductor. The package and installation instructions can be found here and are very simple.

The basic installation installs all required packages but not necessarily those that are listed under Suggests unless you installed the package with BiocManager::install("GRaNIE", dependencies = TRUE).

However, we also provide instructions on how to install the newest version of the package outside of Bioconductor for users who do not use the newest version of Bioconductor and/or do not have the devel version of Bioconductor installed. For details, see the instructions here.

Note that from the additional packages, only some of the genome annotation packages are actually required, which of them depends on your genome assembly version (see below).

2.2 Additional packages

Overall, we tried to minimize the installation burden and only require packages if they are absolutely necessary for the main workflow. If you want to pre-install also all optional packages, please consider the following options:

  1. Use BiocManager::install("GRaNIE", dependencies = TRUE) which however installs all annotation packages for all supported genomes, which may take a longer time due to the overall download size of multiple Gb.
  2. Install only the required annotation packages, along with all other optional packages. You may use the following for it:
    • Genome annotation packages (only one of the four is optionally needed for some functions, see section below, which of them depends on your genome assembly version):

      • hg38: BiocManager::install(c("org.Hs.eg.db", "BSgenome.Hsapiens.UCSC.hg38", "TxDb.Hsapiens.UCSC.hg38.knownGene"))
      • hg19: BiocManager::install(c("org.Hs.eg.db", "BSgenome.Hsapiens.UCSC.hg19", "TxDb.Hsapiens.UCSC.hg19.knownGene"))
      • mm10: BiocManager::install(c("org.Mm.eg.db", "BSgenome.Mmusculus.UCSC.mm10", "TxDb.Mmusculus.UCSC.mm10.knownGene"))
      • mm9: BiocManager::install(c("org.Mm.eg.db", "BSgenome.Mmusculus.UCSC.mm9", "TxDb.Mmusculus.UCSC.mm9.knownGene"))
      • rn6: BiocManager::install(c("org.Rn.eg.db", "BSgenome.Rnorvegicus.UCSC.rn6", "TxDb.Rnorvegicus.UCSC.rn6.refGene"))
      • rn7: BiocManager::install(c("org.Rn.eg.db", "BSgenome.Rnorvegicus.UCSC.rn7", "TxDb.Rnorvegicus.UCSC.rn7.refGene"))
      • dm6: BiocManager::install(c("org.Dm.eg.db", "BSgenome.Dmelanogaster.UCSC.dm6", "TxDb.Dmelanogaster.UCSC.dm6.ensGene"))
    • If you want to use the JASPAR database for TF and TFBS, you need the following extra packages: BiocManager::install(c("JASPAR2022", "TFBSTools", "motifmatchr", "rbioapi"))

    • For all other optional packages, you may execute this line for installing them in one go: BiocManager::install(c("IHW", "robust", "csaw", "EDASeq", "ChIPseeker", "variancePartition", "ReactomePA", "DOSE", "clusterProfiler", "BiocFileCache", "BiocParallel"))

2.3 Detailed information about the scope of the optional packages

GRaNIE has a number of packages that enhance the functionality for particular cases, may be required depending on certain parameters, only when using a particular functionality or that generally speed-up the computation. In detail, the following packages are currently optional and may be needed context-specifically:

  • Genome assembly and annotation packages (only one of the four is optionally needed, which of them depends on your genome assembly version)

    • all of the following packages are ONLY needed for either additional peak annotation in combination with ChIPseeker (see below) or if the chosen peak normalization method is GC-based (EDASeq_GC_peaks, gcqn_peaks)
    • org.Hs.eg.db: Needed only for hg19 or hg38
    • org.Mm.eg.db: Needed only for mm9 or mm10
    • org.Rn.eg.db: Needed only for rn6 or rn7
    • org.Dm.eg.db: Needed only for dm6
    • BSgenome.Hsapiens.UCSC.hg19, TxDb.Hsapiens.UCSC.hg19.knownGene: Needed only for hg19
    • BSgenome.Hsapiens.UCSC.hg38, TxDb.Hsapiens.UCSC.hg38.knownGene: Needed only for hg38
    • BSgenome.Mmusculus.UCSC.mm10, TxDb.Mmusculus.UCSC.mm10.knownGene: Needed only for mm10
    • BSgenome.Mmusculus.UCSC.mm9, TxDb.Mmusculus.UCSC.mm9.knownGene: Needed only for mm9
    • BSgenome.Rnorvegicus.UCSC.rn6, TxDb.Rnorvegicus.UCSC.rn6.refGene: Needed only for rn6
    • BSgenome.Rnorvegicus.UCSC.rn7, TxDb.Rnorvegicus.UCSC.rn7.refGene: Needed only for rn7
    • BSgenome.Dmelanogaster.UCSC.dm6, TxDb.Dmelanogaster.UCSC.dm6.ensGene: Needed only for dm6
    • ChIPseeker: Not needed strictly speaking, but used only for the function addData() to provide additional peak annotation, fully optional otherwise.
  • TF and TFBS related packages

    • JASPAR2022, TFBSTools, motifmatchr, rbioapi: Needed only when source = "JASPAR" for addTFBS() for using JASPAR 2022 TFs and TFBS
  • Additional statistical packages and for enhanced functionality

    • IHW: Needed only for the function filterGRNAndConnectGenes() for p-value adjustment of the raw peak-gene p-values when using the IHW framework (parameter peak_gene.fdr.method)
    • csaw: Needed only for a cyclic LOESS normalization in addData(), which is the default normalization currently for adding TF activity data via addData_TFActivity()
    • EDASeq: Provides additional, GC-aware normalization schemes for the peak data in in `addData().
    • variancePartition: Needed only for the function add_featureVariation() to quantify multiple sources of biological and technical variation for features (TFs, peaks, and genes)
    • robust: Needed only when setting addRobustRegression = TRUE in the functions addConnections_peak_gene() and add_TF_gene_correlation() for enabling robust regression (an experimental, largely undocumented feature so far).
  • Enrichment-associated packages

    • topGO, ReactomePA, DOSE, clusterProfiler: Needed only for all enrichment functions for GO, Reactome, DO, and KEGG respectively
  • Computational efficacy

    • BiocFileCache: Needed only for loadExampleObject(), in cases when this function is executed multiple times, caching is faster than re-downloading the file anew every time the function is executed.
    • BiocParallel: Only used but highly recommended in the functions addConnections_peak_gene(), add_TF_gene_correlation(), and overlapPeaksAndTFBS() to speed-up computation when requesting multiple cores.

3 Example Workflow

Check the workflow vignette for an example workflow with explanations, figures and results.

4 Example GRN object

For user convenience, we provide the function loadExampleObject() that can load a supported GRN object from the GRaNIE package from an arbitrary URL into R. This function can be used, for example, to load an example object that contains a small number of TFs that we specifically prepared for package use and exploring the package.

Simply run the following command:

GRN = loadExampleObject()

You can start by simply typing GRN (i.e., the object name) into the console, and a summary of the GRN object is printed. The example object is always up to date with the most recent version of the package and everything that the package can calculate is contained in the object. Thus, you can run any function after loading the example object.

For more details on where the data from the example object comes from, see the workflow vignette with explanations.

5 Input

In our GRaNIE approach, we integrate multiple data modalities. Here, we describe them in detail and their required format.

5.1 Open chromatin and RNA-seq data

Open chromatin data may come from ATAC-seq, DNAse-seq or ChIP-seq data for particular histone modifications that associate with open chromatin such as histone acetylation (e.g., H3K27ac). They all capture open chromatin either directly or indirectly, and while we primarily tested and used ATAC-seq while developing the package, the others should also be applicable for our framework. From here on, we will refer to these regions simply as peaks.

For RNA-seq, the data represent expression counts per gene across samples.

Here is a quick graphical representation which format is required to be compatible with our framework:

  • columns are samples, rows are peaks / genes
  • column names are required while row names are ignored
  • except for one ID columns, all other columns must be numeric and represent counts per sample
  • ID column:
    • The name of the ID column can be anything and can be specific later in the pipeline. For peaks, we usually use peakID while for RNA-seq, we use EnsemblID
    • for peaks, the required format is “chr:start-end”, with chr denoting the chromosome, followed by :, and then start, -, and end for the peak start and end, respectively. Coordinates are assumed to be zero-based exclusive, the standard for BED files, see here or here for more information. In short, the first base in a chromosome is numbered 0, and the last base is not included in the feature. For example, a peak with the coordinates chr1:100-150 starts at position 100 (or the 101th base of the chromosome, as counting starts with 0), spans 50 bp and ends at 149 (and NOT 150).
  • counts should be raw if possible (that is, integers), but we also support pre-normalized data. See here for more information.
  • peak and RNA-seq data may contain a distinct set of samples, with some samples overlapping but others not. This is no issue and as long as some samples are found in both of them, the GRaNIE pipeline can work with it. Note that only the shared samples between both data modalities are kept, however, so make sure that the sample names match between them and share as many samples as possible. See the methods part for guidelines on how many samples we recommend.

Note that peaks should not overlap. If they do, an informative error message is thrown and the user is requested to modify the peak input data so that no overlaps exist among all peaks. This can be done by either merging overlapping peaks or deleting those that overlap with other peaks based on other criteria such as peak signal, by keeping only the strongest peak, for example.

For guidelines on how many peaks are necessary or recommended, see the section below.

For guidelines on whether and how to prepare single-cell 10x multiome data, see here.

5.2 TF and TFBS data

TF and TFBS data is mandatory as input. As of March 2023, we offer two different ways of how to import TF and TFBS data into GRaNIE.

5.2.1 Importing custom TF and TFBS data

First, we support the import of any TF and TFBS data irrespective of how it was generated or what it represents, thereby offering full flexibility for how our framework is used. The only drawback is that preparing the TF and TFBS data is a little more involved. This was the only and default way of how to use GRaNIE until February 2023. In what follows, we explain more details.

Specifically, the package requires a bed file per TF with TF binding sites (TFBS). TFBS can either be in-silico predicted, or experimentally verified, as long as genome-wide TFBS can be used. For convenience and orientation, we provide TFBS predictions for HOCOMOCO-based TF motifs that were used with PWMScan for hg19, hg38 and mm10. Check the workflow vignette for an example.

We recommend to download the full HOCOMOCO TFBS data from here. In short, we provide example files for selected supported genome assemblies (hg19, hg38 and mm10) that are fully compatible with GRaNIE as separate downloads. While we also provide TFBS data for FIMO, we recommend using HOCOMOCO.

However, you may also use your own TFBS data, and we provide full flexibility in doing so. Only some manual preparation is necessary. Briefly, if you decide to use your own TFBS data, you have to prepare the following:

  • a folder that contains one TFBS file per TF in bed or bed.gz format, 6 columns
  • file names must be {TF}{suffix}.{fileEnding}, where {TF} specifies the name of the TF, {suffix} an optional and arbitrary string (we use _TFBS, for example), and {fileEnding} the file type (supported are bed and bed.gz).
  • the folder must also contain a so-called translation table that must be called translationTable.csv. This file must have the following structure: 3 columns (tab-separated), called SYMBOL, ENSEMBL, and HOCOID. The first column denotes a symbol or shortcut for the TF that is used throughout the pipeline (e.g., AHR), the second the ENSEMBL ID (without the dot suffix; e.g., ENSG00000106546) and the third column the prefix of how the file is called with the TFBS (e.g., AHR.0.B if the file for AHR is called AHR.0.B_TFBS.bed.gz).
  • we provide example files for selected genome assemblies (hg19, hg38 and mm10) that are fully compatible with GRaNIE as separate downloads. For more information, check here.

For more methodological details, details on how to construct these files, their exact format etc we refer to diffTF paper and website for details.

5.2.2 Importing TF and TFBS from the JASPAR databases directly in R

As of March 2023, we additionally a more user-friendly way of importing TF and TFBS data from the various JASPAR databases that are available in R/Bioconductor: JASPAR 2014, 2016, 2018, 2022, and 2022. While we so far tested only with th newest JASPAR2022 database / R package, the older ones should also work - if not, please let us know. Using JASPAR2022 as TF database is much easier and also quicker from a user perspective, and none of the additional complexities that were mentioned above for the custom import apply here. For details, see the addTFBS() and overlapPeaksAndTFBS() functions.

Note that we also implemented an option to customize which TFBS collection to use from the JASPAR2022 database via the function argument JASPAR_useSpecificTaxGroup from addTFBS(). For example, this feature can be used to specify the whole TF collection irrespective of the genome assembly the data is in - which is useful for genomes such as rat or mouse, for which JASPAR only finds a few dozen TF at most if the specific genome was specified otherwise.

Be aware, though, that you may want to compare your eGRN across different TF and TFBS data - we are currently investigating the effect of using JASPAR2022 and cannot currently comment much on it. We will, however, update the vignette here once we have more results to share.

5.3 Sample metadata (optional but highly recommended)

Providing sample metadata is optional, but highly recommended - if available, the sample metadata is integrated into the PCA plots to understand where the variation in the data comes from and whether any of the metadata (e.g., age, sex, sequencing batch) is associated with the PCs from a PC, indicating a batch effect that needs to be addressed before running the GRaNIE pipeline.

The integration of sample metadata can be achieved in the addData() function (click the link for more information).

5.4 Hi-C data (optional)

Integration of Hi-C data is optional and serves as alternative to identifying peak-gene pairs to test for correlation based on a predefined and fixed neighborhood size (see Methods).

If TAD domains are used, the neighborhood of a peak will be defined by the TAD the peak is located in, and all genes in the same TAD will be tested for correlation. If the TAD is very narrow, this consequently results in fewer genes to be tested as compared to a fixed 250 kb neighborhood (the default), for example, while the opposite is true for a large megabase-long TAD domain.

If Hi-C data are available, the pipeline expects a BED file format with at least 3 columns: chromosome name, start, and end. An ID column is optional and assumed to be in the 4th column, all additional columns are ignored.

For more details, see the R help (?addConnections_peak_gene) and the Methods.

5.5 SNP data (optional, coming soon)

We also plan to integrate SNP data soon, stay tuned!

5.6 TF activity data (optional, coming soon)

We also plan to make it possible to manually import TF activity or any other TF-specific data that can be used for generating TF-peaks links, in addition to our default approach of using TF expression. Stay tuned!

For more details, see here.

6 Methodological Details and Basic Mode of Action

In this section, we give methodological details and guidelines.

6.1 Data normalization

As everywhere in bioinformatics, proper data normalization for both RNA and open chromatin (peaks) data is very important. Thus, the chosen normalization method may have a large influence on the resulting eGRN, so make sure the choice of normalization is reasonable. Data normalization is performed when the data is imported into GRaNIE in the addData() function and cannot be changed thereafter.

In this section, we give details on the supported data normalization schemes currently available in the GRaNIE framework.

6.1.1 Normalization methods common for peaks and RNA data

We currently support six choices of normalization of either peak or RNA-Seq data: limma_quantile, DESeq2_sizeFactors, limma_cyclicloess, limma_scale, csaw_cyclicLoess_orig, csaw_TMM plus none to skip normalization altogether. The default for RNA-Seq is a quantile normalization, while for the open chromatin peak data, it is DESeq2_sizeFactors (i.e., a “regular” DESeq2 size factor normalization). Importantly, some normalization methods such as DESeq2_sizeFactors strictly require raw data, while others, such as limma_quantile, do not necessarily.

6.1.2 Normalization methods specific for peaks data

For peaks, two additional GC-based normalization schemes are offered: EDASeq_GC_peaks and gcqn_peaks. We refer to the R help for more details (?addData).

6.1.3 Raw vs pre.normalized data

We recommend raw data as input, although it is also possible to provide pre-normalized data as input. Pre-normalizing data beforehand may be useful in case there are known batch effects, for example. Removing the batch effects from the counts before running GRaNIE therefore may be a worthwhile strategy, a procedure that generally produces non-integer counts. In such a case, the user can then either normalize the data with another normalization method (one that is suitable also with non-integer values, see above) or skip additional normalization and use the counts as they are (choosing none therefore for the normalization parameter).

6.2 TF-peak connections

To identify statistically significant TF-peak connections we implement a cell-type specific data-driven approach. In brief, we first calculate the Pearson correlation coefficients between the expression level of each TF and the open chromatin signal of each peak across all samples. We then use an empirical FDR procedure to identify statistically significant TF-peak connections. For this, for each TF, we split the peaks into two sets: A foreground set containing the peaks with a putative TFBS and a corresponding background set consisting of peaks without putative TFBS based on the TF-peak binding matrix calculated above. We then discretize the TF-peak correlation r into 40 bins in steps of 0.05 ranging from -1, -0.95, …, 0, …, 1 and calculate a bin-specific FDR value using two different directions. For more details on how we establish TF-peak links, please check the Supplement of the corresponding publication. See References for links.

We employ a shuffling-based approach to calculate background TF-peak links, as described in detail here.

6.2.1 TF-peak connection types

TF-peak connections are found by correlating a suitable measure related to TFs with peak accessibility, and then identifying statistically significant links. By default, TF expression is used as TF measure, but we also implemented an additional measure for establishing these links based on a measure called TF activity (see below).

6.2.2 GC correction

TFs and therefore also TF motifs can have very different GC preferences. Some TFs are known to bind to very GC-rich regions such as SP1. Thus, when calculating the TF-peak link FDRs, comparing a GC-rich or GC-poor foreground set of peaks with the full background (that is, all other peaks with no predicted site), the latter of which may exhibit a very different GC distribution, is potentially biasing the FDR values. We therefore offer an experimental feature to correct for this effect and to use a corresponding GC-matching background. The GC correction is enabled with useGCCorrection = TRUE in the function addConnections_TF_peak(). Note that the GC adjustment will take additional time and is currently much slower as compared to not adjusting the background.

Importantly, we note again that this feature is experimental as of now and we are still exploring its effects and plausibility.

When the GC correction is activated, the following is performed:

  1. The pre-calculated GC content of each peak is taken and binned into 10 GC bins (0-10%, 11-20%, …, 91-100%)
  2. For both TF-specific foreground and background, the relative frequencies of each of the GC bins is calculated (thus, the sum of all relative frequencies equals 1)
  3. We currently offer two different modes of how to create a GC-matched background.
    1. When percBackground_resample is set to a value > 0 (default is 75), the background size is fixed to this value (i.e., 75 translates to a background size of 75% of the original size), and no iterative procedure is run to automatically determine the background size (see b).
    2. When percBackground_resample = 0, an automatic iterative procedure is run that determines the maximum value of percBackground_resample (starting from a value of 100 - the full size of the background - down to 5 maximum in steps of 5 per iteration) so that all GC bins with a relative frequency of at least 5% in the foreground can be matched in sufficient numbers with the corresponding GC bin from the background. GC bins with a relative frequency of less than 5% are ignored due to their low relevance. If the background size as identified by the iterative procedure selects a background that is too small (< 1000 peaks), the selected background percentage is again increased in steps of 5% until at least 1000 peaks can be selected from. This is done for statistical reasons and ensures a minimum no of points in background, even if this sacrifices the mimicking of the distributions as described above.
  4. Finally, after a value for the percentage of the background size to sample from, the background can now actually be sampled for each GC bin. If percBackground_resample is set to TRUE, then the background distribution will mimic the foreground distribution perfectly even for GC bins that are very lowly abundant (i.e., those with a relative frequency of < 0.05 in the foreground). In summary, for GC bins for which not enough peaks are available in the background, a resampling scheme is performed that selects the required number of peaks by sampling with replacement from the background. If set to FALSE, however, no resampling is performed and the number of peaks selected from the background is the maximum that can be selected. In this case, the relative frequencies in foreground and background may differ. Note that when percBackground_resample = 0, this is only relevant for GC bins with a relative frequency of < 0.05, while otherwise, resampling may occur for an GC bin depending on the chosen value of percBackground_size

Rationale for choosing an appropriate number for percBackground_resample

Ideally, one would want to select as many peaks in the background as possible to maximize the sample size and therefore randomness for better statistical sampling. However, this often fails because particular GC bins may be very dominant in the foreground for GC-rich TFs (e.g., the GC bin 71-80% has a relative frequency of 25%) while the background contains overall only 5% peaks with this GC bin. Thus, one cannot select 25% of all background peaks (as the relative frequency of the GC bins in the foreground is to be kept in the background) of the same GC bin without resampling. The only alternative is to not use the full background size as reference, but only a particular percentage of it so that the required absolute numbers of peaks to sample from decreases and eventually can be selected for all relevant GC bins. When choosing this option, the background size can be much smaller (e.g., 15% only), therefore also choosing only a relative small absolute number of peaks from the background. However, no resampling is done here, therefore not (by chance) giving particular peaks a higher weight.

You may ask which value to choose for percBackground_size and whether to use GC correction at all, however? These are good questions, and while we cannot give any guaranteed reply, we can give recommendations and our experiences from a limited number of datasets:

  • for most TFS, those that have no GC preference, whether or not the background is GC corrected should not make a big difference as foreground and background are sufficiently similar for these TFs (in theory, we do not to verify whether this is actually really true)
  • for those with extreme GC preferences, in either direction, foreground and background will be very different, and the effects of the GC correction are most visible. Choose some TFs with known GC preferences such as SP1 and check the diagnostic plots to verify and get a feeling for how well the correction worked.
  • we generally recommend running GRaNIE once with and once without GC correction to compare the eGRNs. What we sometimes see is that in the eGRN without a GC correction, the most abundant TFs actually have a GC-rich motif, indicating that they may be overrepresented in the eGRN.
  • for choosing an appropriate value of percBackground_size, we recommend leaving it at the default value of 75 first and potentially adjusting it after looking at the diagnostic plots. Higher values will result in (1) a higher number of GC bins that need resampling (and therefore potentially overrepresenting some peaks or indirectly causing a bias due to the higher percentage of resampled peaks) while (2) increasing the background size overall, which is better from a statistical sampling point of view. We think
    1. outweighs (1) and therefore set the default to a relatively high value, but we are still checking and experimenting with this feature. This is why the GC correction is still marked as experimental. On the other hand, a lower value will result in the opposite of the two points mentioned above. As often in statistics and science, it is about finding a good compromise.

Judging how well the GC correction worked

We also provide detailed QC plots that summarize both the GC background selection as well as the differences for teh TF-peak connections with and without GC correction. For more details, see here.

Reproducibility of GC correction

Lastly, we need to emphasize that the GC correction, due to the random sampling from the background, is not deterministic and may yield a slightly different number of connections each time it is run. The more bins are resampled (see discussion above), the more differences may arise

6.2.3 TF Activity connections

As explained above, TF-peak connections are found by correlation TF expression with peak accessibility. In addition to expression, we also offer to identify statistically significant TF-peak links based on TF Activity. The concept of TF Activity is described in more detail in our diffTF paper. In short, we define TF motif activity, or TF activity for short, as the effect of a TF on the state of chromatin as measured by chromatin accessibility or active chromatin marks (i.e., ATAC-seq, DNase sequencing [DNase-seq], or histone H3 lysine 27 acetylation [H3K27ac] ChIP-seq). A TF Activity score is therefore needed for each TF and each sample.

TF Activity information can either be calculated within the GRaNIE framework using a simplified and empirical approach) or it can be calculated outside of our framework using designated methods and then imported into our framework. We now describe these two choices in more detail.

6.2.3.1 Calculating TF Activity

In our GRaNIE approach, we empirically estimate TF Activity for each TF with the following approach:

  • normalize the raw peak counts by one of the supported normalization methods (see below)
  • from the TF-peak accessibility matrix as calculated before, identify the subset of peaks with a TFBS overlap for the particular TF based on the user-provided TFBS data
  • scaling and centering of the normalized accessibility scores per row (i.e., peak) so that row means are close to 0 for each peak
  • the column means (i.e., sample means) from the scaled and centered counts are then taken as approximation for the TF Activity

By default, we currently offer the four different types of normalizing the raw data for calculating TF Activity. Options 2 to 4 are described in more detail in the section Data normalization above, while option 1 is currently only available for TF Activity and therefore explained below (this may change in the future):

  1. Cyclic LOESS normalization (default)
    Local regression (LOESS) is a commonly used approach for fitting flexible non-linear functions, which involves computing many local linear regression fits and combining them. Briefly, a normalization factor is derived per gene and sample using the normOffsets function of the csaw package in R as opposed to using one size factor for each sample only as with the regular size factor normalization in DeSeq. For each sample, a LOWESS (Locally Weighted Scatterplot Smoothing) curve is fitted to the log-counts against the log-average count. The fitted value for each bin pair is used as the generalized linear model offset for that sample. The use of the average count provides more stability than the average log-count when low counts are present. For more details, see the csaw package in R and the normOffsets methods therein.
  2. Standard size factor normalization from DeSeq
  3. Quantile normalization
  4. No normalization

6.2.3.2 Importing TF Activity

Soon, it will also be possible to import TF Activity data into our framework as opposed to calculating it using the procedure as described above. This feature is currently in development and will be available soon.

6.2.3.3 Adding TF Activity TF-peak connections

Once TF Activity data is available, finding TF-peak links and assessing their significance is then done in complete analogy as for the TF expression data - just the input data is different (TF Activity as opposed to TF expression). The so-called connection type - expression or TF Activity, is stored in the GRN object and output tables and therefore allows to tailor and filter the resulting network accordingly. All output PDFs also contain the information whether a TF-peak link has been established via the TF expression or TF Activity.

6.3 Peak-gene associations

In the GRaNIE framework, we construct peak-gene pairs completely independently and separately from the TF-peak links. For this, the function addConnections_peak_gene() is used. In general, we offer two options to decide which peak-gene pairs to test for correlation:

  1. By default, without additional Hi-C data, we use a local neighborhood-based approach with a user-defined neighborhood size (default: 250 kb both up- and downstream of the peak; see parameter promoterRange for details) to select which peak-gene pairs to test. Thus, for a particular peak, all genes within 250 kb either up- or downstream of it would be selected and tested for correlation.
  2. In the presence of additional topologically associating domain (TADs) data from Hi-C or similar approaches, for a particular peak, the package selects all peak-gene pairs within the same TAD for correlation. Noteworthy, peaks located outside of any TAD domain are ignored. The user has furthermore the choice to specify whether overlapping TADs should be merged beforehand or not.

For both approaches, the user can select between two options of how to exactly calculate the distance between a peak and a gene. That is, which part of the gene is taken as reference point: the 5’ end (TSS, the default) or the full gene including all exons and introns. For more information see the R help (?addConnections_peak_gene and the parameter overlapTypeGene in particular)

Importantly, as for TF-peaks, we also employ a shuffling-based approach to calculate background peak-gene links, as described in detail here.

6.5 Background eGRN

6.5.1 Methods

In the GRaNIE framework, in addition to the real connections, we also calculate background connections in each step based on randomized data. Calculating a background eGRN follows exactly the same principles and methods as the real eGRN, without exceptions. It is only the input data that is shuffled in different ways, for both TF-peak links as well as peak-gene links, as follows:

  1. TF-peak links: First, the rows of the binary 0/1 TF-peak overlap table are shuffled separately for each sample (i.e., per column) to produce a truly random overlap matrix. In addition, the sample labels for the RNA counts are shuffled. Thus, subsequently, the counts that are correlated between RNA and peak data are not from the same pair of samples in fact.

  2. peak-gene links: After creating the real and true table for the peak-gene pairs that fulfil the user-specified requirements for being tested for correlation (e.g., within the specified distance from one another as defined by the parameter promoterRange), the peaks are shuffled. This consequently means that the peak-gene pairs that are subsequently tested for correlation are (usually) not in the specified proximity anymore, but instead mostly on other chromosomes or at a very different location on the same chromosome. Notably, this preserves the degree distribution for both peaks and genes: that is, if a gene or peak is overrepresented, this is also true for the shuffled version. Second, in analogy to the background TF-peak links, the sample labels for the RNA counts are shuffled before peak-gene correlations are calculated. The latter can be controlled via the parameter shuffleRNACounts in addConnections_peak_gene(). Empirically, we found that only shuffling the peak-gene links is not sufficient to create a truly random background, which is why the default behavior is to do the shuffling in addition. Nevertheless, this can be user-controlled.

  3. TF-peak-gene links (eGRN): Combining TF-peak and peak-gene links for the background data then again follows the exact same methods as the real eGRN. However, due to the randomized nature of both the TF-peak and peak-gene links, the background eGRN typically has very few or no statistically significant connections at all.

In summary, we want to emphasize that we currently do not simply permute the real eGRN network. Instead, we re-construct an eGRN using the very same methods but with randomized data, as outlined above. This allows us to judge and compare the connectivity for the real network as compared to a background eGRN.

6.5.2 Object and output details related to the background links

In the GRN object (GRN@connections slot, to be specific), we label the background data with a 1, while the original data is labeled as 0. For example, GRN@connections$TF_peaks[["0"]] stores the original connections, while GRN@connections$TF_peaks[["1"]] stores those arising from the background.

Relevant output files consequently contain the background label to designate that the corresponding background has been used to generate the plot, while the original data is labeled as original.

6.6 Constructing the eGRN graph

After a filtered set of TF-peak-gene links (i.e., a full eGRN) has been built with filterGRNAndConnectGenes(), the actual graph must be constructed using the function build_eGRN_graph() based on the filtered eGRN (in GRN@connections$all.filtered[["0"]]).

Importantly, two types of networks are constructed:

  1. TF-peak-gene network: The networks is tripartite and contains TF, peak, and gene nodes. For example, if a TF links to multiple peaks, all of which may link to the same target gene, these will be represented by separate and different edges in the network. In essence, this graph is in principle the same as the filtered eGRN table as produced by filterGRNAndConnectGenes().
  2. TF-gene network: The networks is bipartite and contains only TF and gene, but not peak nodes. Thus, if a TF links to multiple peaks in the underlying set of filtered connections, all of which may link to the same target gene, these will be represented as only one edge in the network after removing duplicate links. Also, particular edges may be removed from the graph such as direct TF-TF edges, depending on the chosen parameters (e..g, allowLoops).

For subsequent functions, either of the two networks is used, and the user can choose which type of network to use if both are possible (such as for visualizeGRN).

For more information, see the R help (?build_eGRN_graph).

6.7 Enrichment analyses

After the graph has been built, three types of enrichment analysis are available within the GRaNIE framework:

  1. Enrichment based on the full network (function calculateGeneralEnrichment)
  2. Enrichment based on communities (function calculateCommunitiesEnrichment())
  3. Enrichment based on TF regulons (function calculateTFEnrichment())

All enrichment functions here use the TF-gene graph in the GRN object and therefore require the function build_eGRN_graph() to be run beforehand. They are, as explained above, based on the filtered network as obtained by filterGRNAndConnectGenes() and include only the genes from the corresponding (sub)network.

All three functions have corresponding plot functions to visualize the enrichment. For more information such as supported ontologies, see the corresponding R help for the functions, all details are explained there.

For an explanation of the output files from the plot functions, see here.

All results are stored in GRN@stats$Enrichment. For example, the results from the enrichment results of TF E2F7.0.B from the example GRN object (see function loadExampleObject()) for the GO biological process (BP) enrichment can be retrieved from GRN@stats$Enrichment$byTF$E2F7.0.B$GO_BP$results, while the parameters that were used to run the enrichment are correspondingly stored in GRN@stats$Enrichment$byTF$E2F7.0.B$GO_BP$parameters.

6.8 Network visualization

We also provide the function visualizeGRN() to visualize a filtered eGRN network. It is very easy to invoke, but provides many options to customize the output and the way the graph is drawn. We recommend to explore the options in the R help (?visualizeGRN). Note that we use the provided network visualization methods from the igraph package.

It works well for small to medium-sized networks that contain a few hundred edges, but may fail for larger eGRNs. Drawing thousands of nodes and edges at once without losing readability is almost impossible. However, here are a few tips on what you can do if your eGRN cannot be drawn or it looks not nice enough:

  • reduce the number of connections by filtering the network more stringently and re-run the visualization, potentially also by subsetting your network to particular TFs or genes. Simply rerun the function filterGRNAndConnectGenes() and build_eGRN_graph()
  • increase the value of the parameter maxEdgesToPlot to say 1000 or even more, and check whether the eGRN can be drawn. It may also help to increase the dimensions of the PDF (if plotAsPDF = TRUE) by increasing pdf_width and pdf_height.
  • change the visualization layout by changing the layout parameter. Try all of the supported layouts (see ?visualizeGRN for a list), maybe one looks good enough.

If none of the plotting-related parameters work better, you can only reduce the size of the network and re-run as pointed above in the first point.

6.9 Feature variation quantification

One of our latest features we added to the package is to use the variancePartition package to quantify and interpret the multiple sources of biological and technical variation from the features (TFs, peaks, and genes) in a GRN object. This can be done via the function add_featureVariation(). This can be helpful to identify where exactly the observed variation actually comes from, which we believe is useful information when checking eGRNs and particular elements of it. Note that this is still a work of progress, however, and we did not yet test this feature for many datasets.

In essence, we run the main function fitExtractVarPartModel of the package variancePartition. This fits a linear (mixed) model to estimate the contribution of multiple sources of variation while simultaneously correcting for all other variables for the features in a GRN object (TFs, peaks, and genes), given particular metadata. The function reports the fraction of variance attributable to each metadata variable. As input, the normalized count matrices are used.

The formula used for model fitting can either be provided manually or set to auto. For the latter case, the formula will be build automatically based on all metadata variables as specified with the metadata parameter. By default, numerical variables will be modeled as fixed effects, while variables that are defined as factors or can be converted to factors (characters and logical variables) are modeled as random effects as recommended by the variancePartition package.

The user can also speciy whether to run the procedure only on the features from the filtered set of connections (the eGRN, the result of filterGRNAndConnectGenes()) or on all filters (that is, for all features irrespective of whether or not they are part of the final eGRN).

For more information where the information is stored in the GRN object and which QC plots are available, see here.

7 Output

Here, we describe the various output files that are produced by the pipeline. They are described in the order they are produced in the pipeline.

7.1 GRN object and results stored within

7.1.1 Object details

Our pipeline works and output a so-called GRN object. The goal is simple: All information is stored in it, and by keeping everything within one object and sharing it with others, they have all the necessary data and information to run the GRaNIE workflow. A consistent and simple workflow logic makes it easy and intuitive to work with it, similar to other packages such as DESeq2.

Technically speaking, it is an S4 object of class GRN. As you can see from the workflow vignette, almost all GRaNIE functions return a GRN object (with the notable exception of get functions - i.e., all functions that start with get). Except initializeGRN(), which creates an empty GRN object, they also all require a GRN object as first argument, which makes is easy and intuitive to work with.

GRN objects contain all data and results necessary for the various functions the package provides, and various extractor functions allow to extract information out of an GRN object such as the various get functions. In addition, printing a GRN object results in an object summary that is printed (try it out and just type GRN in the console if your GRN object is called like this!). In the future, we aim to add more convenience functions. If you have specific ideas, please let us know.

The slots of a GRN object are described in the R help, see ?GRN-class for details. While we work on general extractor functions for the various slots for optimal user experience, we currently suggest to also access and explore the data directly with the @ operator until we finalized it. For example, for a GRN object called GRN, GRN@config accesses the configuration slot that contains all parameters and object metadata, and slotNames(GRN) prints all available slots of the object.

7.1.2 Results in the object

During a typical GRaNIE analysis, almost all results are automatically stored in GRN object that is used as input (exceptions are indicated in the corresponding sections) and therefore, almost all functions return also the very same GRN object, containing in addition the results of the function.

The only exception is the function getGRNConnections() that can be used to extract the resulting eGRN network from a GRN object and returns a separate data frame and NOT a GRN object. For more information and an explanation about the various columns that are returned from the function, see the corresponding R help ( ?getGRNConnections).

7.1.3 Object summary

A summary of a GRN object can be retrieved with the function getGRNSummary(). This returns a named list that summarizes all relevant aspects for a GRN object. For more details, see the R help.

7.2 Original and normalized data, annotations and provided metadata

7.2.1 Object data

All user data is stored in GRN@data. This slot contains the following elements:

  • peaks: Here, peaks data are stored, and the list contains the following elements:
    • counts stores the data after the user-selected normalization scheme has been performed (even if set to none)
    • counts_metadata stores the peak metadata (peak location, ID, and whether or not it is marked as filtered with the current object settings)
    • counts_raw is only present when the user used keepOriginalReadCounts = TRUE when running the addData() function. It stores the original, user-provided data before any normalization scheme. For memory reasons and because the raw counts are never directly used in the GRaNIE workflow, they are not stored by default (anymore).
  • RNA: Here, RNA data are stored, and the list contains the same elements as the peaks data, with one additional element:
    • GRN@data$RNA$counts_permuted_index: A memory-saving representation of how to perform sample shuffling when permuting the data, which is the basis for constructing the background links for both TF-peak and peak-gene connections.
  • metadata: Data frame with the user-provided sample-specific metadata and a few additional metadata that were added when running addData().
  • TFs: Here, TF-specific data are stored, and the list contains the following elements:
    • TF_peak_overlap stores the binary 0/1 TF-peak overlap matrix that denotes whether a particular TF has a putative/predicted TF binding site in a particular peak. This information comes from the provided TF and TFBS data from the functions addTFBS() and overlapPeaksAndTFBS() in particular
    • classification stores the TF classification results and is only present when the function AR_classification_wrapper() has been run successfully. For more information, see here

7.2.2 Plots

No plots are specifically available for the count data, but the PCA plots can be used to visualize the variability in the normalized count data for both paks and RNA (see here for more details).

For the TF classification, output plots are available, see here for more details.

7.3 PCA plots and results

7.3.1 Object data

Currently, the actual PCA result data are not stored in the GRN object, but we may change this. We will update the Vignette once this is done and mention it in the News/Changelog.

7.3.2 Plots

The pipeline outputs PCA plots for both peaks and RNA as well as original (i..e, the counts the user provided as input) and normalized (i.e., the counts after normalizing them if any normalization method has been provided) data. Thus, in total, 4 different PCA plots are produced, 2 per data modality (peaks and RNA) and 2 per data type (original and normalized counts).

Each PDF consists of three parts: PCA results based on the top 500, top 1000 and top 5000 features (see page headers, depending on the parameter topn in plotPCA_all()). For each part, different plot types are available and briefly explained in the following:

  1. Multi-density plot across all samples (1 page)
  1. Screeplot (1 page)
  1. Metadata correlation plot
  1. PCA plots with different metadata being colored (5 or more pages, depending on available metadata)

7.4 TF-peak results and diagnostic plots

7.4.1 Object data

The TF-peak connections are stored in GRN@connections$TF_peaks. This list is structured as follows:

  • the first level constitutes, in analogy to many other places within the object, whether the real or background links are stored. For more details, see here.

  • inside both real and background links (i.e., within GRN@connections$TF_peaks[["0"]] and GRN@connections$TF_peaks[["1"]]), a list with two elements is stored:

    • main, containing a data frame with the actual TF-peak connections along with additional properties
    • connectionStats, containing a summary of the empirical FDR procedure, stratified by TF, correlation bin, FDR direction and TF connection type. This slots also contains details on GC-specific information if activated (see parameter useGCCorrection = TRUE in addConnections_TF_peak)

The slot GRN@stats$GC is also populated:

  • Irrespective of whether or not a GC correction has been done, overall statistics for the user-provided peaks with respect to GC properties and relative frequencies are stored in GRN@stats$GC$peaks.
  • If the GC adjustment of the background has been performed, additional elements within GRN@stats$GC are stored:
    • TFs_GC_correction: A data frame that summarized the GC correction on the TF and GC bin level
    • TFs_GC_correction_plots: For each TF, the GC plots for each TF are stored, namely the same two plots that were part of the output plots (see below). For example, to plot the first plot of the TF AIRE.0.C, simply type GRN@stats$GC$TFs_GC_correction_plots$AIRE.0.C[[1]].

7.4.2 Plots

We provide multiple QC plots for the TF-peak connections as part of the output, as explained in the following.

7.4.2.1 Overall connection summary

First, we provide an overview of the total number of TF-peak connections for a range of typically used FDR values for both real and background TF-peak links, stratified by the TF-peak correlation bin. Typically, one sees three things:

  1. The number of true links is much larger than the number of background links. Often, there are barely any background links passing our statistical procedure of identifying only links that are different from noise.
  2. The number of links depends highly on the correlation bin. Often, only more extreme correlation bins are populated, simply because a low correlation coefficient close to 0 does not yield a significant p-value. However, depending on the total number of samples and other parameters, the threshold for when a correlation bin may give significant result is changing.
  3. The higher the FDR, the more links remain.

7.4.2.2 TF-specific plots

7.4.2.2.1 Connection summary

In addition, we provide TF-specific diagnostic plots for all TFs that are included in the GRaNIE analysis. They summarize the FDR and number of connections, stratified by the connection type (see here for methodological details), the FDR directionality and the TF-peak correlation bin for both real and background links (see here for methodological details).

The TF name is indicated in the title, and each page shows two plots. In each plot, the TF-peak FDR for each correlation bin (ranging from -1 to 1 in bins of size 0.05) is shown. The only difference between the two plots is the directionality upon which the FDR is empirically derived from: the upper plot is for the positive and the lower plot for the negative direction (for more details, see the References). Each plot is also colored by the number of distinct TF-peak connections that fall into the particular bin. Mostly, correlation bins with smaller absolute correlation values have higher frequencies (i.e., more TF-peak links fall into them) while correlation bins with more extreme correlation values are less frequent. In the end, for the resulting TF-peak and ultimately the eGRN network, the directionality can be ignored and only those TF-peak links with small FDRs are kept, irrespective of the directionality.

7.4.2.3 Correlation plots

For a particular (set of) TF-peak pair(s), the underlying TF-peak data and the correlation can be visualized with plotCorrelations(). For more information, see the R help for the function.

7.4.3 Extra plots for the GC correction

When GC background adjustment was activated (useGCCorrection = TRUE in the function addConnections_TF_peak()), additional QC plots can optionally be generated with the function plotDiagnosticPlots_TFPeaks_GC(). They summarize all relevant data and adjustments related to the GC adjustment. Note that this function is not run automatically as part of the regular TF-peak diagnostic plots at the moment when plotDiagnosticPlots_TFPeaks() is executed.

7.4.3.1 TF-specific plots

For each TF, 2 plots (1 per page in the corresponding PDF file) are produced. One shows the relative frequency of each of the GC bins, stratified by the peak set origin (foreground, background before and after GC adjustment), the second the absolute frequencies (log10 + 1 transformed). For the first plot, GC bins for which resampling was performed are additionally labeled with a percentage value that indicates which percentage of the required number of peaks was actually available in the background. Thus, a value of 95% indicates that only 5% of peaks where missing to have the required number of peaks available in the background (small number of resampled peaks), while a value of 5% indicates the opposite: a large resampling happened to select the required number of peaks, and a potential sampling bias from the small number of peaks to select from in the first place may have occurred.

Typically, though, resampling happens only for extreme GC bins that have a relatively low relative percentage in the foreground. Ideally, one should see a perfect match between foreground and GC-adjusted background in the plots, both in relative frequencies (page 1) and absolute numbers (page 2) for as many GC bins as possible. The number of GC bins for which resampling occurred should be as small as possible, on the other hand.

7.4.3.2 Overall summary

The pages after summarize further aspects of the GC adjustment in the form of heatmaps. Each page shows the heatmap for a particular variable, each row in the heatmap is a TF, and columns are either the peak GC bins (stratified into ten bins, see above) or the TF-peak correlation bins (40 bins, in steps of 0.05, see above). The color scale is either blue-white-red (for negative and positive scales), white-red (for only positive ones) or black-white (for binary variables).

  1. Details for peak GC bins from either foreground or background that are the basis for the bin-specific FDR calculation (labeled GC adjustment details in the plot title) As the legend indicates, variables are either foreground or background (n.bg.needed, n.bg.needed.ratio, n.bg.needed.ratio.atLeast1) associated, belong to both (n, peak_width mean, peak_width sd, n_rel ) or they capture the difference of foreground and background (diff_fg_bg). For each plot, TFs are clustered according to their similarity, so the TF ordering differs for each plot.

  2. TF-peak connection summary from the actual connections before and after the GC background adjustment (labeled GRN connections in the plot title) as stored in GRN@connections$TF_peaks. Four plots are shown, three of which show absolute numbers (n_beforeGC, n_afterGC, n_diff_abs) and one a relative number (n_diff_rel, calculated as n_afterGC / n_beforeGC). For ratios that R deems as Infinite like this (e.g, 1 connection after GC correction but no connection without it - 1 / 0), we set the ratio to a value of either the maximum of all finite values in the heatmap or a hard-coded value of 10 - depending on what the maximum of these two values is. Unlike the heatmaps above, TFs are not clustered here but appear in the same alphabetical order on every plot.

7.5 Activator-repressor classification results and diagnostic plots

7.5.1 Object data

It is also possible to extract the results from the AR classification out of a GRN object. Currently, this can only be done manually, extractor functions are in the works that will further enhance the user experience. The results are stored in the slot GRN@data$TFs$classification[[permIndex]] [[connectionType]]$TF.classification. Here, permIndex refers to the original, non-permuted (0) or permuted (1) data, while connectionType here is either expression or TFActivity, depending on whether the pipeline has also be run for TF Activity in addition to expression (see function addConnections_TF_peak()). Thus, typically, the results for the original data are stored in GRN@data$TFs$classification[["0"]] [["expression"]]$TF.classification. If intermediate results from the classification have not been deleted (the default is to delete them as they can occupy a large amount of memory in the object, see the parameters of AR_classification_wrapper for details), they can be accessed similarly within GRN@data$TFs$classification[[permIndex]] [[connectionType]]: TF_cor_median_foreground, TF_cor_median_background, TF_peak_cor_foreground, TF_peak_cor_background, and act.rep.thres.l.

7.5.2 Plots

The pipeline produces 3 different plot types related to the activator-repressor (AR) classification that can optionally be run as part of the GRaNIE workflow. For each of the 3 types, plots are produced for both the original (labeled as original) as well as the permuted (labeled as permuted) data.

The AR classification is run for the RNA expression data (labeled as expression) and can additionally also be run for TF activity data (labeled as TFActivity, see the function addConnections_TF_peak() and its parameter options).

In the following, the 3 plot types are briefly explained:

  1. Summary heatmaps (files starting with TF_classification_summaryHeatmap): This is described in detail in the diffTF documentation.

    We explain and summarize this type of plot in the Workflow Vignette. Please check there for details.

  2. Classification stringency summary plots (files starting with TF_classification_stringencyThresholds): This is described in detail in the diffTF documentation.

  3. Density plots per TF (files starting with TF_classification_densityPlotsForegroundBackground): Density plots for each TF, with one TF per page. The plot shows the foreground (red, labeled as Motif) and background (gray, labeled as Non-motif) densities of the correlation coefficient (either Pearson or Spearman, see x-axis label) from peaks with (foreground) or without (background) a (predicted) TFBS in the peak for the particular TF. The numbers in the parenthesis summarize the underlying total number of peaks.

7.6 Peak-gene results and diagnostic plots

7.6.1 Object data

The peak-gene connections are stored in GRN@connections$peak_genes. This list is structured as follows:

  • the first level constitutes, in analogy to many other places within the object, whether the real or background links are stored. For more details, see here.
  • inside both real and background links (i.e., within GRN@connections$peak_genes[["0"]] and GRN@connections$peak_genes[["1"]]), a data frame with the peak-gene connections along with additional metadata (peak.ID, gene.ENSEMBL, peak_gene.distance) and statistical properties are stored (peak_gene.r, peak_gene.p_raw)

7.6.2 Plots

The function plotDiagnosticPlots_peakGene() or indirectly the function addConnections_peak_gene() (when plotDiagnosticPlots = TRUE) plots various diagnostic plots for the peak-gene links that are imperative for understanding the biological system and resulting eGRN. In what follows, we describe them briefly, along with some notes on expected patterns, implications etc. Note that this section is subject to regular change.

The main QC summary figure on page 1 is divided into two rows: the upper row focuses on the peak-gene raw p-value from the correlation tests, while the lower row focuses on the peak-gene correlation coefficient. The left side visualizes the data of the corresponding metrics via density plots, while the right side bins the metrics and visualizes them with barplots for highlighting differences between real and background data as well as negatively and positively correlated peak-gene links (denoted as r+ and r-, respectively).

We will now discuss and explain both of them in more detail.

7.6.2.1 Correlation raw p-value distribution

First and most importantly, we focus on the distribution of the raw p-values from the correlation tests (i.e., peak accessibility correlated with gene expression) of all peak-gene links. We can investigate these from multiple perspectives.

Let’s start with a density plot. The upper left plot shows the raw p-value density for the particular gene type as indicated in the title (here: all gene types), stratified on two levels:

  1. Real (left) versus background (right) connections
  2. Connections that have a negative (r-, gray) and positive (r+, black) correlation coefficient, respectively

Generally, we also consider r- connections as background. The reasoning for this is as follows: Since chromatin accessibility in regulatory elements is generally associated with active gene regulation and transcription, we only expect positive correlations for functional peak-gene links. Notably, the same is still true even for repressor-bound elements, where binding of most repressors leads to loss of both accessibility and transcription. Negative correlations have no clear biological meaning and therefore may indicate remaining batch effects or random noise.

What we would like to see is:

  • background connections show little to no signal, with a flat line along the x-axis (i.e., a flat p-value histogram), with little to no difference between r+ and r-connections
  • for the real connections and r+ links, a strong peak at small p-values, and a (marginally) flat distribution for higher ones (similar to a well-calibrated raw p-value distribution for any hypothesis test such as differential expression). For r- links, the peak at small p-values should be much smaller and ideally the curve is completely flat. However, from the many datasets we examined, this is rarely the case.

If any of these quality controls fails, it indicates at least one assumption of the framework is violated. This could be due to an issue with data normalization, the underlying biology and what the eGRN represents, or an issue with data size or covariates influencing the results. Often, when the number of samples is small, the QC does not look satisfactory. Thus, it is important to use as many samples as possible, preferably at least 12 or so (see here for more details).

To quantify the difference between r+ and r- links within each connection type (background vs real), we can also plot the results in form of ratios rather than densities for either the r+ / r- or the real / background dimension. These plots are shown in the upper right panel of the summary plot.

For the r+ / r- dimension and background data, the ratios should be close to 1 across all p-value bins, while for the real data, a high ratio is typically seen for small p-values. In general, the difference between the background and real bar should be large for small p-values and close to 1 for larger ones.

For the real / background dimension, what we want to see is again a high ratio for small p-value bins for the r+ links, indicating that when comparing background vs real, there are many more small p-value links in real data as compared to background. This usually does not hold true for the r- links, though, as can be seen also from the plot: the gray bars are smaller and closer to 1 across the whole binned p-value range.

7.6.2.2 Correlation coefficient distribution

We also provide a summary of the distribution of the peak-gene correlation coefficient. Typically, one sees that the distribution of the real links is wider (i.e., more links with high absolute values - in either direction) and less pronounced around 0 as compared to the background, an indication of the captured signal in the real data.

7.6.2.3 Stratification with metadata and additional features

Lastly, we also provide additional, advanced QC plots in which we stratify the aforementioned raw p-value distributions across real data according to various metadata and additional biological and statistical features that we calculate during the GRaNIE workflow.

For each of these variables, two plots are shown based on the real data only. First, density plots for the raw peak-gene p-value distribution, stratified by r+ and r-, along with a summary graph showing the ratio of r+ / r- in a barplot. Second, a page with two barplots showing the same information as before, just visually differently.

The features include, for example, the mean, median, or the coefficient of variation (ratio of the standard deviation to the mean, a unitless and standardized measure of dispersion/variability; abbreviated CV in what follows) for both peak and RNA data. The individual values are all calculated based on the normalized input data across all samples (excluding the filtered peaks / genes, in analogy how the eGRN is constructed) as stored in GRN@annotation. We also stratify by peak annotation as identified by the ChIPSeeker package, the GC content of the peaks as well as the combined CV of peak and gene:

  • peak GC class
  • peak width / mean / median / CV
  • gene mean / median / CV
  • peak-gene combined CV (3 classes here: gene CV & peak CV < 0.5, gene CV & peak CV > 1, and other)
  • peak annotation

Lastly, a few density plots are shown that stratify by the peak-gene distance. In total 10 equidistant bins (which results in the bins containing a non-equal number of data points but genomic distance is increased uniformly from bin to bin) are constructed, ranging from 0 to the user-defined value of the maximum peak-gene distance, which was defined as promoterRange in the function addConnections_peak_gene(). In addition, a background bin is shown, labeled as “randomized”, from the background data (see above):

  • peak-gene raw p-value (stratified in addition by r+/r-)
  • peak-gene correlation coefficients

We generally (hope to) see that for smaller peak-gene distances (in particular those that overlap, i.e., the peak and the gene are in direct vicinity or even overlapping), the difference between r+ and r- links is bigger as for more distant links. We also include the random links, for which no difference between r+ and r- links is visible, as expected for a well-calibrated background.

7.6.2.4 Correlation plots

For a particular (set of) peak-gene pair(s), the underlying peak-gene data and the correlation can be visualized with plotCorrelations(). For more information, see the R help for the function.

7.7 Filtered TF-peak-gene connections (eGRN table)

7.7.1 Object data

The peak-gene connections are stored in GRN@connections$all.filtered. This list is structured as follows:

  • the first level constitutes, in analogy to many other places within the object, whether the real or background links are stored. For more details, see here.
  • inside both real and background links (i.e., within GRN@connections$all.filtered[["0"]] and GRN@connections$all.filtered[["1"]]), a data frame with the TF-peak-gene connections along with additional metadata and statistical properties are stored. This table is not to be used directly, however; instead, the function getGRNConnections() has to be used to retrieve them and add additional information as needed along with it.

7.7.2 Plots

No plots are available here, but the eGRN can be visualized with visualizeGRN().

7.8 TF-gene connections

7.8.1 Object data

The peak-gene connections are stored in GRN@connections$$TF_genes.filtered. This list is structured as follows:

  • the first level constitutes, in analogy to many other places within the object, whether the real or background links are stored. For more details, see here.
  • inside both real and background links (i.e., within GRN@connections$$TF_genes.filtered[["0"]] and GRN@connections$$TF_genes.filtered[["1"]]), a data frame with the TF-gene connections along with additional metadata and statistical properties are stored. This table is not to be used directly, however; instead, the function getGRNConnections() with include_TF_gene_correlations has to be used to retrieve them.

7.8.2 Plots

For a particular (set of) TF-gene pair(s), the underlying TF-gene data and the correlation can be visualized with plotCorrelations(). For more information, see the R help for the function.

In addition, the eGRN can be visualized with visualizeGRN().

7.9 Connection summary plots

7.9.1 Object data

The results of the function generateStatsSummary() is stored in GRN@stats$connections. This table contains a lot of information, including but not limited to the various parameters the function iterated over to generate multiple eGRNs for different parameter thresholds and combinations such as the number of distinct TFs, peaks, genes, their connectivity, etc.

7.9.2 Plots

We currently offer two different connection summary PDFs, both of which are produced from the function plot_stats_connectionSummary(). Both PDFs shows the number of connections for each node type (TF, peak, and gene), while in the boxplots, peaks are further differentiated into TF-peak and peak-gene entities. They also iterate over various parameters and plot one plot per page and parameter combination, as indicated in the title:

  1. allowMissingTFs: TRUE or FALSE (i.e., allow TFs to be missing when summarizing the eGRN network. If set to TRUE, a valid connection may consist of just peak to gene, with no TF being connected to the peak. For more details, see the R help for plot_stats_connectionSummary())
  2. allowMissingGenes: TRUE or FALSE (i.e., allow genes to be missing when summarizing the eGRN network. If set to TRUE, a valid connection may consist of just TF to peak, with no gene being connected to the peak. For more details, see the R help for plot_stats_connectionSummary())
  3. TF_peak.connectionType. Either expression or TFActivity to denote which connection type the summary is based on.

Both plot types compare the connectivity for the real and background data (denoted as Network type in the boxplot PDF), which allows a better judgment of the connectivity from the real data.

An example page for the summary heatmap looks like this:

Here, two heatmaps are shown, one for real (top) and one for background (bottom) network. Each of them shows for different combinations of TF-peak and peak-gene FDRs (0.01 to 0.2) the number of unique node types for the given FDR combination (here: TFs).

Second, a multi-page summary PDF for the connections in form of a boxplot, as exemplified with the following Figure:

7.10 eGRN graph

7.10.1 Object data

The actual graph structure is stored in GRN@graph after successful execution of the function build_eGRN_graph().It contains two different kind of graphs, namely the TF-peak-gene and the TF-gene graph. Each of them is associated with a list element with the same name, which stores also the table that was used to create the graph along with the graph itself and the used parameters for creating it.

7.10.2 Plots

The function visualizeGRN() can be used for visualization of the eGRN graph.

7.11 Community information

7.11.1 Object data

The identified communities for each node are stored within igraph objects in GRN@graph$TF_gene$clusterGraph (retrievable via GRN@graph$TF_gene$clusterGraph$membership, for example) and as vertex attributes in GRN@graph$TF_gene$graph (retrievable via igraph::vertex.attributes(GRN@graph$TF_gene$graph)$community, for example).

7.11.2 Plots

The function visualizeGRN() can be used for visualization of the identified communities in the eGRN graph. The functions plotCommunitiesStats() and plotCommunitiesEnrichment() can be used for plotting and summarizing community properties and enrichments, respectively.

7.12 Enrichment results and plots

7.12.1 Object data

All enrichment results are stored inside GRN@stats$Enrichment . This contains a nested list with the named elements general, byCommunity, and byTF for general, community-specific and TF-specific enrichments, respectively.

Inside each of these elements, there is further nesting by the chosen ontology (e.g, `GO_BP), and whether results or the parameters of the enrichment function should be retrieved.

7.12.2 Plots

7.12.2.1 General enrichment

The output is structured as follows: - one page per ontology for the whole eGRN with an enrichment summary that includes the ontology terms (y-axis), the gene ratio (the number of genes found divided by the total number of genes in the foreground) on the x-axis, the raw p-value (color) and the absolute number of genes found (dot size). The plot title gives some additional information such as the chosen ontology, the statistic used, the used background, the number of genes in foreground and background, respectively, and the chosen multiple testing adjustment (if applicable; in some cases, this is ignored due to the way the enrichment calculation works)

7.12.2.2 Community enrichment

The output is structured as follows: - one page per ontology and community with an enrichment summary (see general enrichment above for explanations) - two pages in the end that compare the community-enrichment with the general enrichment. Here, all ontology terms that are deemed significant according to the chosen significance threshold p (see function parameters) in either the general or the community-specific enrichment are included, along with their -log10-transformed statistical confidence (either raw or adjusted p-value). The top part shows the size of the general enrichment and the community-specific subnetworks (in number of genes they include). In contrast, the last page shows not all but only the top 10 enriched terms per column.

7.12.2.3 TF enrichment

The output is structured in analogy to the community enrichment, but instead of communities, the regulon that a particular TF spans is chosen as subnetwork (i.e., all genes the TF is connected to).

7.13 Feature variation quantification

7.13.1 Object data

The results are added to GRN@stats$variancePartition as well as within the various feature-related elements of GRN@annotation. The former slot and results can be used for the various diagnostic and plotting functions from the variancePartition package.

The easiest way to retrieve and include the results into the final eGRN is to rerun the function getGRNConnections() and set include_variancePartitionResults = TRUE, as the results are NOT added automatically to GRN@connections$all.filtered either.

7.13.2 Plots

QC plots for the feature variation results are available via the function plotDiagnosticPlots_featureVariation().

We are currently working on updating details for this section. Stay tuned, coming soon!

8 Guidelines, Recommendations, Limitations, Scope

In this section, we provide a few guidelines and recommendations that may be helpful for your analysis.

8.1 Package scope

In this section, we want explicitly mention the designated scope of the GRaNIE package, its limitations and additional / companion packages that may be used subsequently or beforehand.

This section is still being completed, and we regularly extend it.

8.2 Number of samples

The number of samples is very important. Due to the nature of the method (correlating sample data), a small number of samples is likely to violate the assumptions of our framework, in particular the peak-gene links (see here for more details). We generally recommend at least 10, better 15 samples that are shared between the RNA and peak data - remember that in the GRaNIE framework, only samples for which both modalities are available can be included in the analysis. Thus, the overlap of RNA and peak data should be at least 10-15 samples, the more the better in general.

8.3 Peaks

The number of peaks that is provided as input matters greatly for the resulting eGRN and its connectivity. From our experience, this number should be in a reasonable range so that there is enough data and TFBS overlap to build a eGRN, but also not too many so that the whole pipeline runs unnecessarily long. We have good experience with the number of peaks ranging between 50,000 and 200,000, although these are not hard thresholds but rather recommendations.

With respect to the recommended width of the peaks, we usually use peaks that have a width of a couple of hundred base pairs until a few kb, while the default is to filter peaks if they are wider than 10,000 bp (parameter maxSize_peaks in the function filterData()). Remember: peaks are used to overlap them with TFBS, so if a particular peak is too narrow, the likelihood of not overlapping with any (predicted) TFBS from any TF increases, and such a peak is subsequently essentially ignored.

8.4 RNA-Seq

The following list is subject to change and provides some rough guidelines for the RNA-Seq data:

  1. We recommend using raw counts if possible, and checking carefully in a PCA whether any batch effects are visible (provide and check with metadata such as age or gender - the more, the better).
  2. Genes with very small counts across samples are advised to be removed by running the function filterData(), see the argument minNormalizedMeanRNA for more information. You may want to check beforehand how many gens have a row mean of >1. This number is usually in the tens of thousands.

8.5 Transcription factor binding sites (TFBS)

TFBS are a crucial input for any GRaNIE analysis. Our GRaNIE approach is very agnostic as to how these files are generated - as long as one BED file per TF is provided with TFBS positions, the TF can be integrated. As explained above, we usually work with TFBS as predicted by PWMScan based on HOCOMOCO TF motifs, while this is by no means a requirement of the pipeline. Instead, JASPAR TFBS or TFBS from any other database can also be used. The total number of TF and TFBS per TF seems more relevant here, due to the way we integrate TFBS: We create a binary 0/1 overlap matrix for each peak and TF, with 0 indicating that no TFBS for a particular TF overlaps with a particular peak, while 1 indicates that at least 1 TFBS from the TFBS input data does indeed overlap with the particular peak by at least 1 bp. Thus, having more TFBS in general also increases the number of 1s and therefore the foreground of the TF (see the diagnostic plots) while it makes the foreground also more noisy if the TFBS list contains too many false positives. As always in biology, this is a trade-off.

8.6 Peak-gene p-values accuracy and violations

As outlined already above, the peak-gene diagnostic plots are very important to check and to verify that the assumptions of our framework and the underlying data are met. We highly recommend doing so, and we provide detailed recommendations and our experiences here.

8.7 eGRNs from single-cell data

We now also provide some preliminary guidelines on whether and how to use GRaNIE for single-cell eGRN inference. For more details, see the designated vignette for single-cell data.

8.8 Recapitulating object history, function parameters etc

A nice little helper feature for the GRaNIE package is that the object history, including all function calls that have been applied to the object, including the function parameters and their actual values (unless a variable has been provided, then only the variable name is stored and not the actual value), the date, and the actual call are stored in the actual GRN object in a nested list inside GRN@GRN@config$functionParameters. This looks like the following, for example, for the function add_TF_gene_correlation that has been executed at 2023-01-23 21:50:52 CET:

> GRN@config$functionParameters$add_TF_gene_correlation$`2023-01-23_21:50:52`

$call
add_TF_gene_correlation(GRN = GRN, nCores = 5)

$parameters

$parameters$GRN
GRN

$parameters$nCores
[1] 5

$parameters$corMethod
[1] "pearson"

$parameters$addRobustRegression
[1] FALSE

$parameters$forceRerun
[1] FALSE

This can be very helpful for recapitulating at a later point which functions have been applied to a GRN object, and to verify specific parameter assignments.

9 Memory footprint and execution time, feasibility with large datasets

In this section, we will give an overview over CPU and memory requirements when running or planning an analysis with GRaNIE.

Both CPU time and memory footprint primarily depend on similar factors, namely the number of

  1. TFs
  2. peaks
  3. samples

While the number of TFs is typically similar across analyses when the default database is used (HOCOMOCO + PWMScan), the number of peaks and samples may vary greatly across analyses.

For optimized CPU times, make sure to have the package BiocParallel installed, which is not automatically installed with GRANIE, even though it should be already installed for most Bioconductor installations as it is one of the core packages.

9.1 CPU time

A typical analysis runs within an hour or two on a standard machine with 2 to 4 cores or so. CPU time non-surprisingly depends primarily on the number of used cores for those functions that support multiple cores and that are time-consuming in nature.

9.2 Memory footprint

The maximum memory footprint even for a large dataset during a typical GRaNIE workflow usually does not exceed a few GB in R. Instead, it is usually in the range of 1-2 GB only maximum. Thus, GRaNIE can usually be run on a normal laptop without problems.

We recommend not using more than a few 100,000 or so peaks as the memory footprint as well as running time may otherwise increase notably. However, there is no package-defined upper limit, it all depends on the available system memory.

Given that our approach is correlation-based, it seems preferable to maximize the number of samples while retaining only peaks that carry a biological signal that is differing among samples.

The size of the GRN object itself is typically in the range of a few hundred MB, but can go up to 1-2 GB for large datasets. If you have troubles with big datasets, let us know! We always look for ways to further optimize the memory footprint. However, with the recent optimizations to store the count matrices as sparse matrix if the fraction of 0s is too large, the overall memory footprint significantly reduced.

10 References

Appendix

  1. GRaNIE and GRaNPA biorxiv