0.1 Introduction: What is PrInCE?

Proteins are the central players of life at the molecular level. Yet cellular functions are rarely accomplished by single proteins acting in isolation. Instead, most biological processes are accomplished by the dynamic organization of proteins and other biological macromolecules, such as RNA and DNA, into networks of physical interactions. Systematic maps of these protein interaction networks can provide a “wiring diagram” to complement the “parts list” revealed by genome sequencing, placing each protein into a functional context. However, historically, protein interaction networks were mapped primarily using labour-intensive methods that involved tagging each protein for affinity purification, or heterologously expressing them in yeast. Besides being labour intensive, these approaches also yielded static pictures of cellular networks that offered little insight into how these networks are rewired by stimulation or in differentiation.

Recently, a family of proteomic approaches, variously referred to as co-elution, co-migration, co-fractionation, or protein correlation profiling, has been developed that allow high-throughput mapping of protein interaction networks in native cellular conditions (1–3). A subset of these even enable investigators to identify dynamic rearrangements in the protein-protein interactome in response to cellular stimulation (1, 4), or across in vivo samples, such as mouse tissues (5). The underlying principle that unifies different experimental protocols is to separate protein complexes into a number of fractions, on the basis of their size (diameter) or biochemical properties, and to perform quantitative proteomic analysis of the fractions. Proteins with similar “profiles” across fractions can be inferred to physically interact. However, because the number of potential pairs grows quadratically with the number of proteins quantified, and the number of potential complexes grows even faster, specialized bioinformatic approaches are required to infer protein interaction networks from the raw proteomics data.

PrInCE is an R package that uses a machine learning approach to infer protein-protein interaction networks at a user-defined level of precision from co-elution proteomics data. The input to PrInCE consists of a matrix derived from a co-elution proteomics experiment, with quantitations for each protein in each fraction (PrInCE can also handle more than one such matrix, in the case of biological replicates). PrInCE also requires a set of ‘gold standard’ protein complexes to learn from. It then calculates a series of features for each possible protein pair; importantly, these are derived directly from the data, without incorporating any external knowledge, a step that minimizes bias towards the rediscovery of known interactions (6). These features, and the accompanying gold standard, are used as input to the classifier, which learns to distinguish interacting and non-interacting pairs. A cross-validation procedure is then used to score every potential protein pair in the dataset, which are then ranked by their score in descending order, and the precision (defined as the ratio of true positives to true positives plus false positives) is calculated at every point in this ranked list. The user can then apply a precision threshold of their choice to this ranked list to infer the protein-protein interaction network from their experiment.

0.2 Example 1: Interactome rearrangements in apoptosis

To demonstrate the use of PrInCE, we will work through a small example that is derived from a subset of the data presented in Scott et al., 2017 (4). In this paper, the authors mapped rearrangements in the cytoplasmic and membrane interactome during Fas-mediated apoptosis. Control and stimulated cytoplasmic and membrane interactomes were quantified in three replicates each, meaning the complete dataset consists of twelve replicates. In practice, each set of replicates would be analyzed together (for a total of four networks). However, such a complete analysis of the dataset would take over an hour, so for this vignette we focus on a single replicate. The replicate in question is the first cytoplasmic replicate from the Fas-stimulated condition, and is bundled with the PrInCE package; it can be loaded with the following command:

library(PrInCE)
data(scott)

The dataset consists of ratiometric protein quantitations, achieved by SILAC (stable isotope labelling by amino acids in cell culture), for 1,560 proteins in 55 size exclusion chromatography (SEC) fractions:

dim(scott)
## [1] 1560   55

Each protein was quantified in at least one fraction; however, many measurements are missing:

scott[1:10, 1:5]
##            SEC_1 SEC_2 SEC_3  SEC_4  SEC_5
## A0AVT1       NaN   NaN   NaN    NaN    NaN
## A0MZ66-5     NaN   NaN   NaN    NaN    NaN
## A3KN83       NaN   NaN   NaN    NaN    NaN
## A5YKK6       NaN   NaN   NaN    NaN    NaN
## A6NDG6       NaN   NaN   NaN    NaN    NaN
## A6NG79       NaN   NaN   NaN    NaN    NaN
## A6NHL2-2     NaN   NaN   NaN    NaN    NaN
## A6NHR9       NaN   NaN   NaN 2.5125 1.8817
## A6NIH7       NaN   NaN   NaN    NaN    NaN
## A6NN80   0.22313   NaN   NaN    NaN    NaN

This scenario is common in co-elution data: for example, a protein will be absent entirely from a given SEC fraction if it does not form a complex with a molecular weight in the mass range of that fraction.

To predict protein-protein interactions using PrInCE’s machine-learning approach, we also need two additional pieces of information to train the classifier: a set of true positive interactions, and a set of true negative interactions. In practice, we recommend providing a list of experimentally verified protein complexes: PrInCE assumes intra-complex interactions represent true positives, and inter-complex interactions represent true negatives. These can be obtained from a number of sources, such as the CORUM database (7), or our own previously reported custom subset of CORUM that removes complexes which may not remain intact under co-elution conditions (8). In the PrInCE R package, we provide a third option which is distributed under a CC-BY license, consisting of a list of 477 human protein complexes from the Complex Portal (9).

data(gold_standard)
head(gold_standard)
## $`5-hydroxytryptamine-3A/B receptor complex`
## [1] "O95264" "P46098"
## 
## $`5-hydroxytryptamine-3A/C receptor complex`
## [1] "P46098" "Q8WXA8"
## 
## $`5-hydroxytryptamine-3A/D receptor complex`
## [1] "P46098" "Q70Z44"
## 
## $`5-hydroxytryptamine-3A/E receptor complex`
## [1] "P46098" "A5X5Y0"
## 
## $`6-phosphofructokinase, M2L2 heterotetramer`
## [1] "P08237" "P17858"
## 
## $`ACF complex`
## [1] "Q9NRL2" "O60264"

0.2.1 Predicting protein-protein interactions: one-step analysis

The main function of the PrInCE package, PrInCE, provides an end-to-end workflow for predicting protein-protein interaction networks from the raw co-elution data. Briefly, this function first filters proteins with too little information to permit data analysis, then cleans the profiles for the remaining proteins and fits a mixture of Gaussians to each cleaned profile. PrInCE then calculates six features for each protein pair, from either the raw profiles, the cleaned profiles, or the fitted Gaussian mixture models, and concatenates features across replicates if more than one replicate was used. These features are used as input to a machine learning model, along with the set of ‘gold standard’ true positive and true negative interactions, which uses a ten-fold cross-validation procedure to assign scores to each protein pair. Protein pairs are ranked by their classifier scores and the precision at each point in the ranked list is calculated. The entire list is returned to a user, who can select a precision threshold that matches their needs.

Once we have loaded a co-elution matrix and list of gold standard protein complexes into R, inferring the protein-protein interaction network with PrInCE is therefore as simple as the following command:

# set the seed to ensure reproducible output
set.seed(0)
## not evaluated 
PrInCE(scott, gold_standard)

However, this command is not evaluated in order to provide some information on a further parameter that the PrInCE function takes. One of the six features that PrInCE uses to score protein-protein interactions is derived from fitting a mixture of Gaussians to each protein’s elution profile. The process of Gaussian fitting also allows PrInCE to filter proteins with poor-quality elution profiles (i.e., proteins for which a Gaussian mixture could not be fit with an r2 value above some minimum, set to 0.5 by default). However, the process of fitting Gaussian mixture models to thousands of curves is one of the more computationally intensive steps in PrInCE and consequently, the PrInCE function can also take a pre-computed list of fitted Gaussians, fit using the command build_gaussians:

# set the seed to ensure reproducible output
set.seed(0)
## not evaluated
build_gaussians(scott)

In practice, the ability to provide pre-computed Gaussians can also save time when trying different parameters in PrInCE, such as different types of classifiers (described in greater detail in the following section).

We provide a list of fitted Gaussians for the scott dataset in the scott_gaussians object:

data(scott_gaussians)
str(scott_gaussians[[3]])
## List of 5
##  $ n_gaussians: int 3
##  $ R2         : num 0.95
##  $ iterations : num 1
##  $ coefs      :List of 3
##   ..$ A    : Named num [1:3] 2.9 1.59 1.21
##   .. ..- attr(*, "names")= chr [1:3] "A1" "A2" "A3"
##   ..$ mu   : Named num [1:3] 16.05 4.91 40.95
##   .. ..- attr(*, "names")= chr [1:3] "mu1" "mu2" "mu3"
##   ..$ sigma: Named num [1:3] 6.74 3.11 3.32
##   .. ..- attr(*, "names")= chr [1:3] "sigma1" "sigma2" "sigma3"
##  $ curveFit   : num [1:55] 0.348 0.701 1.161 1.581 1.789 ...

We therefore run PrInCE using our precomputed Gaussian curves with the following command, allowing PrInCE to print information about the status of the analysis (verbose = TRUE) and limiting the number of cross-validation folds for the sake of time:

# set the seed to ensure reproducible output
set.seed(0)
# one-step analysis
interactions <- PrInCE(scott, gold_standard,
                       gaussians = scott_gaussians, 
                       cv_folds = 3,
                       verbose = TRUE)
## generating features for replicate 1 ...
##   fit mixtures of Gaussians to 970 of 1560 profiles
## concatenating features across replicates ...
## making labels ...
## training classifiers ...
head(interactions, 50)
##                 protein_A protein_B     score label precision
## P12956_P13010      P12956    P13010 0.9977337     1       1.0
## P36578_P40429      P36578    P40429 0.9966806    NA       1.0
## P62258_Q04917      P62258    Q04917 0.9966630    NA       1.0
## P36578_P46778      P36578    P46778 0.9966609    NA       1.0
## P40429_P46778      P40429    P46778 0.9966256    NA       1.0
## D3YTB1_P62424      D3YTB1    P62424 0.9966104    NA       1.0
## P18124_P46778      P18124    P46778 0.9965548    NA       1.0
## P25786_P28066      P25786    P28066 0.9964794    NA       1.0
## P11940_Q08211      P11940    Q08211 0.9964540     0       0.5
## P14868_P41252      P14868    P41252 0.9964416    NA       0.5
## P43686_P62195      P43686    P62195 0.9964398    NA       0.5
## O00231_Q9UNM6      O00231    Q9UNM6 0.9964243    NA       0.5
## P05388_P36578      P05388    P36578 0.9964118    NA       0.5
## E7EPB3_P05388      E7EPB3    P05388 0.9963531    NA       0.5
## P05388_P40429      P05388    P40429 0.9962900    NA       0.5
## C9J4Z3_P36578      C9J4Z3    P36578 0.9962752    NA       0.5
## P62424_Q9Y3U8      P62424    Q9Y3U8 0.9962596    NA       0.5
## P47914_P62913      P47914    P62913 0.9962394    NA       0.5
## P54136_Q15046      P54136    Q15046 0.9962349    NA       0.5
## P24534_P26641      P24534    P26641 0.9962061    NA       0.5
## P62750_P84098      P62750    P84098 0.9961731    NA       0.5
## P35998_Q13200      P35998    Q13200 0.9961714    NA       0.5
## P13796_Q96KP4      P13796    Q96KP4 0.9961656    NA       0.5
## P18124_P36578      P18124    P36578 0.9961590    NA       0.5
## O15067_Q9UNZ2      O15067    Q9UNZ2 0.9961433    NA       0.5
## P61254_P62241      P61254    P62241 0.9961293    NA       0.5
## P07195_P63104      P07195    P63104 0.9961071    NA       0.5
## C9J4Z3_D3YTB1      C9J4Z3    D3YTB1 0.9961065    NA       0.5
## P04075_P31946      P04075    P31946 0.9960961    NA       0.5
## D3YTB1_P36578      D3YTB1    P36578 0.9960820    NA       0.5
## P49207_P62906      P49207    P62906 0.9960814    NA       0.5
## C9J4Z3_P05388      C9J4Z3    P05388 0.9960643    NA       0.5
## P46778_P61313      P46778    P61313 0.9960462    NA       0.5
## P62249_P62263      P62249    P62263 0.9960311    NA       0.5
## E7EPB3_P05387      E7EPB3    P05387 0.9960072    NA       0.5
## D3YTB1_P47914      D3YTB1    P47914 0.9959959    NA       0.5
## P13796_P22392-2    P13796  P22392-2 0.9959923    NA       0.5
## P30520_Q9NY33      P30520    Q9NY33 0.9959870    NA       0.5
## P05387_P05388      P05387    P05388 0.9959828    NA       0.5
## P47914_P62424      P47914    P62424 0.9959807    NA       0.5
## P18124_P40429      P18124    P40429 0.9959782    NA       0.5
## P07814_P54136      P07814    P54136 0.9959722    NA       0.5
## P40429_P62906      P40429    P62906 0.9959695    NA       0.5
## P18124_P61313      P18124    P61313 0.9959678    NA       0.5
## P05388_P46778      P05388    P46778 0.9959540    NA       0.5
## D3YTB1_P05388      D3YTB1    P05388 0.9959445    NA       0.5
## P08590_P60660-2    P08590  P60660-2 0.9959252    NA       0.5
## P26373_P32969      P26373    P32969 0.9959108    NA       0.5
## P13639_P27348      P13639    P27348 0.9959085    NA       0.5
## P05387_P46778      P05387    P46778 0.9958969    NA       0.5

The columns in the output are as follows:

  • protein_A: the identifier of the first protein in the pair;
  • protein_B: the identifier of the second in the pair;
  • score: the score assigned to the protein pair by the classifier
  • label: if the protein pair is in the reference set, this value will be 1 (for true positives) or 0 (for true negatives); for all other pairs, the value is NA
  • precision: the precision at this point in the ranked list

Note that at the very top of the list, the precision is not defined if no true positives and no true negatives have yet been encountered.

In this toy example, the small size of our dataset and the small size of our gold-standard complexes mean that the precision curve is unstable below about 2,000 interactions:

precision <- interactions$precision[1:10000]
plot(precision)

In most real examples, the precision curve shows a smoother decline.

For illustrative purposes, we here threshold the network at 50% precision using the threshold_precision function:

network <- threshold_precision(interactions, threshold = 0.5)
nrow(network)
## [1] 7607

This results in an unweighted protein-protein interaction network with 7607 interactions.

0.2.2 Predicting protein-protein interactions: step-by-step analysis

The PrInCE function accepts a large number of arguments that were omitted from the preceding discussion. We have strived to set reasonable defaults for each of these parameters, based on analyses that have involved much of the human co-elution proteomics data in the public domain. However, users may wish to change some of these defaults, based on the properties of their dataset or the biological questions motivating their investigation. Here, we provide an alternative workflow for analyzing the scott dataset in a step-by-step manner, and a discussion of some of the most important parameters.

0.2.2.1 build_gaussians

The build_gaussians function in PrInCE can be broken down into three steps. First, profiles are preprocessed by basic filtering and cleaning operations. Single missing values are imputed as the mean of their two neighboring points, and profiles with fewer than five consecutive points are filtered from further analysis. Profiles are then cleaned by replacing missing values with near-zero noise, and smoothed with a moving average filter. Finally, mixtures of one to five Gaussians are fit to each profile using nonlinear least squares, and model selection is performed to retain the best mixture model for each curve. Proteins that could not be fit with a mixture of Gaussians without an r2 value above some minimum are omitted.

This function takes the following parameters:

  • min_consecutive: the minimum number of consecutive points, after imputing single missing values, to retain a profile; defaults to 5
  • min_points: the minimum number of total points to retain a profile; defaults to 1 so that only the number of consecutive points is used to filter profiles
  • impute_NA: if FALSE, skip imputation of single missing values
  • smooth: if FALSE, skip curve smoothing with the moving average filter
  • smooth_width: width of the moving average filter, in fractions; defaults to 4
  • max_gaussians: the maximum number of Gaussians with which to fit each profile; defaults to 5
  • criterion: the criterion used for model selection; defaults to AICc, the corrected Akaike information criterion; other options are BIC (Bayesian information criterion) or AIC (Akaike information criterion)
  • max_iterations: the maximum number of iterations to use for curve fitting with random restarts
  • min_R_squared: the minimum r2 value to retain the fitted curve; defaults to 0.5. Profiles that cannot be fit by a mixture of Gaussians are assumed to be low-quality and excluded from further analysis by default.
  • method: method used to select initial conditions for nls; can select either random parameters (random) or make an educated guess based on the maximum values in the profile (guess, the default)
  • filter_gaussians_center, filter_gaussians_height, filter_gaussians_variance_min, filter_gaussians_variance_max: heuristics used to filter poor-quality Gaussian fits. If TRUE (default), filter_gaussians_center will remove Gaussians whose mean falls outside the bounds of the chromatogram. filter_gaussians_height controls the minimum height of the Gaussians, while filter_gaussians_variance_min and filter_gaussians_variance_max control the range of their standard deviation.

All of these parameters except the last four are exposed through the PrInCE function.

As an example, we will re-analyze the scott dataset with stricter filtering criteria, requiring the presence of at least ten (non-imputed) data points in addition to five consecutive points; fitting with a maximum of three Gaussians, instead of five; and requiring a better fit than the default settings. For the sake of time, we allow only 10 iterations for the curve-fitting algorithm here, and we elect to fit only the first 500 profiles.

data(scott)
# set the seed to ensure reproducible output
set.seed(0)
# fit Gaussians
gauss <- build_gaussians(scott[seq_len(500), ], 
                         min_points = 10, min_consecutive = 5, 
                         max_gaussians = 3, min_R_squared = 0.75,
                         max_iterations = 10)
## .. fitting Gaussian mixture models to 255 profiles
# filter profiles that were not fit
scott <- scott[names(gauss), ]

By default, the profile matrix is filtered to exclude proteins whose elution profiles could not be fit by a mixture of Gaussians prior to featurization.

0.2.2.2 calculate_features

Having fitted our co-elution profiles with Gaussians and filtered them accordingly, the next step is to calculate features for each protein pair. This is done using the calculate_features function. By default, PrInCE calculates six features from each pair of co-elution profiles as input to the classifier, including conventional similarity metrics but also several features specifically adapted to co-elution proteomics. The complete set of features includes:

  1. the Pearson correlation between raw co-elution profiles;
  2. the p-value of the Pearson correlation between raw co-elution profiles;
  3. the Pearson correlation between cleaned profiles, which are generated by imputing single missing values with the mean of their neighbors, replacing remaining missing values with random near-zero noise, and smoothing the profiles using a moving average filter (see clean_profile);
  4. the Euclidean distance between cleaned profiles;
  5. the ‘co-peak’ score, defined as the distance, in fractions, between the maximum values of each profile; and
  6. the ‘co-apex’ score, defined as the minimum Euclidean distance between any pair of fit Gaussians

In addition to the profile matrix and list of fitted Gaussian mixtures, the calculate_features function takes six parameters that enable the user to enable or disable each of these six features (in order, pearson_R_raw, pearson_P, pearson_R_cleaned, euclidean_distance, co_peak, and co_apex). By default, all six are enabled.

Continuing our example, if we wanted the classifier to omit the Euclidean distance, we could disable this feature using the following command:

feat <- calculate_features(scott, gauss, euclidean_distance = FALSE)
head(feat)
##   protein_A protein_B    cor_R_raw cor_R_cleaned       cor_P co_peak   co_apex
## 1    A0AVT1    B3KNT8 1.239943e+00      1.097955 0.504313944      11 10.405282
## 2    B3KNT8    B4DQ14 1.264748e+00      1.262210 0.382046523      32 31.566148
## 3    A0AVT1    B4DQJ8 2.851543e-06      1.018199 0.001520321       2  2.714134
## 4    B3KNT8    B4DQJ8 1.045782e+00      1.110313 0.827969878      13  7.815383
## 5    B4DQ14    B4DQJ8 3.928140e-01      1.064420 0.110395487      45 23.819433
## 6    B3KNT8    B4DVY1 1.577634e+00      1.114307 0.001033478      27  9.182583

If we had multiple replicates, we would here concatenate them into a single feature data frame using the concatenate_features function:

## not run
# concatenate features from three different `scott` replicates
feat1 <- calculate_features(scott1, gauss1)
feat2 <- calculate_features(scott2, gauss2)
feat3 <- calculate_features(scott3, gauss3)
feat <- concatenate_features(list(feat1, feat2, feat3))

0.2.2.3 predict_interactions

With our features in hand and a list of gold standard protein complexes, we can now provide these to a machine-learning classifier to rank potential interactions. This is accomplished using the predict_interactions function. In order to score interactions that are also part of the reference set, PrInCE uses a cross-validation strategy, randomly splitting the reference data into ten folds, and using each split to score interactions in one of the folds without including them in the training data. For interactions that are not part of the training set, the median score over all ten folds is returned. In addition, to ensure that the results are not sensitive to the way in which the dataset is split, PrInCE averages predictions over an ensemble of ten classifiers, each with different cross-validation splits. By default, PrInCE uses a naive Bayes classifier. However, the PrInCE R package also implements three other types of classifiers: support vector machine, random forest, and logistic regression. In addition, PrInCE offers an option to ensemble results over multiple different classifiers (sometimes called “heterogeneous classifier fusion” (10)). In this option, cross-validation and ensembling is performed for all four types of classifiers independently, then the ranks of each protein pair across all four classifiers are averaged to return the final ranked list.

These options are controlled using the following parameters:

  • classifier: the type of classifier to use; one of NB, SVM, RF, LR, or ensemble, corresponding to the options described above
  • models: the size of the ensemble for each classifier type, i.e., the number of models to train, each with a different train-test split
  • cv_folds: the number of folds to use in k-fold cross-validation
  • trees: for random forest and heterogeneous classifier fusion only, the number of trees in each RF model

Continuing our example, we will demonstrate the use of a support vector machine to rank potential interactions (classifier = "SVM"). For the sake of time, we use a single model (omitting ensembling; models = 1) and only three-fold cross-validation folds (cv_folds = 3). To use our list of protein complexes as a gold standard, we must first convert it to an adjacency matrix; this is done using the helper function adjacency_matrix_from_list (see also the related function adjacency_matrix_from_data_frame).

data(gold_standard)
reference <- adjacency_matrix_from_list(gold_standard)
# set the seed to ensure reproducible output
set.seed(0)
# predict interactions
ppi <- predict_interactions(feat, reference, classifier = "SVM",
                            models = 1, cv_folds = 3)

We can now plot the precision curve over the first 20,000 interactions:

precision <- ppi$precision[seq_len(2e4)]
plot(precision)

Finally, we will likely want to keep only the set of high-confidence interactions for further analysis, where “confidence” is quantified using precision. This is accomplished using the threshold_precision function. For example, the following command constructs a protein-protein interaction network at 70% precision:

net <- threshold_precision(ppi, threshold = 0.7)
nrow(net)
## [1] 4168

0.2.3 Identifying co-eluting protein complexes

The core functionality of PrInCE involves the use of a machine-learning framework to predict binary interactions from co-elution data, with discovery of novel interactions being a primary goal. However, PrInCE also implements one alternative to this analytical framework, which asks whether statistically significant co-elution is observed for known protein complexes.
This is achieved using a permutation-based approach, inspired by methods developed for another proteomic method for interactome profiling, thermal proximity co-aggregation (TPCA) (11). Briefly, given a list of known complexes, PrInCE calculates the median Pearson correlation between all pairs of complex members. (To reduce the effect of spurious correlations between proteins that are rarely observed in the same fractions, PrInCE requires a certain minimum number of paired observations to include any given correlation in this analysis—by default, 10 pairs). Then, PrInCE simulates a large number of complexes of equivalent size (by default, 100), and calculates the median Pearson correlation between pairs of random ‘complexes’. The resulting null distribution is used to assess the statistical significance of the observed co-elution profile at the protein complex level.

To identify complexes from the Complex Portal dataset that are significantly co-eluting in this replicate, we first use PrInCE’s filter_profiles and clean_profiles functions:

# analyze cleaned profiles
data(scott)
filtered = filter_profiles(scott)
chromatograms = clean_profiles(filtered)

The filter_profiles function uses a permissive set of filters to discard chromatograms that do not contain enough information to make inferences about that protein’s interaction partners. Similarly, the clean_profiles applies some simple preprocessing steps to the filtered chromatograms. By default, this function is applied to calculate Pearson correlations during interaction prediction in PrInCE. It imputes single missing values as the average of the two neighbors, remaining missing values with near-zero noise, then passes a moving-average filter over the chromatogram to smooth it.

We can now test for complex co-elution in the preprocessed chromatogram matrix using the detect_complexes function:

# detect significantly co-eluting complexes
set.seed(0)
z_scores = detect_complexes(chromatograms, gold_standard)

Complexes that could not be tested (that is, with fewer than three complex members present in the elution matrix) are given NA values, which we remove.

# remove complexes that could not be analyzed
z_scores = na.omit(z_scores)
# how many could be tested?
length(z_scores)
## [1] 23
# how many were significant at uncorrected, two-tailed p < 0.05?
sum(z_scores > 1.96)
## [1] 13
# print the top complexes
head(sort(z_scores, decreasing = TRUE))
##                                                      COP9 signalosome variant 1 
##                                                                        9.083072 
##                                                      COP9 signalosome variant 2 
##                                                                        6.744865 
##                                             CRD-mediated mRNA stability complex 
##                                                                        5.806526 
##                                                                     MCM complex 
##                                                                        5.779922 
##                                                             Condensin I complex 
##                                                                        4.568462 
## Embryonic stem cell-specific SWI/SNF ATP-dependent chromatin remodeling complex 
##                                                                        4.256243

Of the 23 complexes that could be tested in this (unusually sparse) replicate, 13 were significant at an uncorrected, two-tailed p-value threshold of 0.05

0.3 Example 2: Interactome of HeLa cells

As a second example, we can reanalyze another dataset bundled with the PrInCE R package. This dataset consists of a subset of the data presented by Kristensen et al., 2012 (1), who applied SEC-PCP-SILAC to monitor the interactome of HeLa cell lysates, then mapped interactome rearrangements induced by epidermal growth factor (EGF) stimulation. Three biological replicate experiments were performed, and in practice, all three replicates from each condition would be analyzed together. However, for the purposes of demonstrating the use of the PrInCE R package, we limit our analysis to the first replicate from the unstimulated condition.

We first load the data matrix and fitted Gaussians, provided with the PrInCE R package:

data("kristensen")
data("kristensen_gaussians")
dim(kristensen)
## [1] 1875   48
length(kristensen_gaussians)
## [1] 1117

The co-elution matrix contains quantifications for 1,875 proteins across 48 SEC fractions. Mixtures of Gaussians were fit to 1,117 of these. For the sake of time, we subset this matrix further to the first 500 proteins:

kristensen <- kristensen[names(kristensen_gaussians), ]
kristensen <- kristensen[seq_len(500), ]
kristensen_gaussians <- kristensen_gaussians[rownames(kristensen)]

We also have to load our reference set of binary interactions or protein complexes, which in this case is derived from the Complex Portal human complexes.

data("gold_standard")
head(gold_standard, 5)
## $`5-hydroxytryptamine-3A/B receptor complex`
## [1] "O95264" "P46098"
## 
## $`5-hydroxytryptamine-3A/C receptor complex`
## [1] "P46098" "Q8WXA8"
## 
## $`5-hydroxytryptamine-3A/D receptor complex`
## [1] "P46098" "Q70Z44"
## 
## $`5-hydroxytryptamine-3A/E receptor complex`
## [1] "P46098" "A5X5Y0"
## 
## $`6-phosphofructokinase, M2L2 heterotetramer`
## [1] "P08237" "P17858"

We can predict interactions in a single step using the main PrInCE function, here using a single model (instead of the default ensemble of ten) and five cross-validation folds (instead of the default of ten) for time:

# set seed for reproducibility
set.seed(0)
# predict interactions
interactions <- PrInCE(profiles = kristensen, 
                       gold_standard = gold_standard,
                       gaussians = kristensen_gaussians,
                       models = 1,
                       cv_folds = 5)

Finally, we can subset our list of interactions to obtain set of high-confidence interactions for further analysis, using a relaxed precision cutoff of 50%.

network <- threshold_precision(interactions, 0.5)
nrow(network)
## [1] 1404

PrInCE predicts a total of 1,047 interactions at a precision of 50%.

0.4 Session info

sessionInfo()
## R version 4.2.1 (2022-06-23)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.5 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.16-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.16-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
## [1] PrInCE_1.14.0    BiocStyle_2.26.0
## 
## loaded via a namespace (and not attached):
##   [1] colorspace_2.0-3      deldir_1.0-6          ellipsis_0.3.2       
##   [4] htmlTable_2.4.1       base64enc_0.1-3       clue_0.3-62          
##   [7] rstudioapi_0.14       mzR_2.32.0            affyio_1.68.0        
##  [10] fansi_1.0.3           tester_0.1.7          ranger_0.14.1        
##  [13] codetools_0.2-18      splines_4.2.1         ncdf4_1.19           
##  [16] doParallel_1.0.17     robustbase_0.95-0     cachem_1.0.6         
##  [19] impute_1.72.0         knitr_1.40            speedglm_0.3-4       
##  [22] Formula_1.2-4         jsonlite_1.8.3        cluster_2.1.4        
##  [25] vsn_3.66.0            png_0.1-7             BiocManager_1.30.19  
##  [28] compiler_4.2.1        backports_1.4.1       assertthat_0.2.1     
##  [31] Matrix_1.5-1          fastmap_1.1.0         limma_3.54.0         
##  [34] cli_3.4.1             prettyunits_1.1.1     htmltools_0.5.3      
##  [37] tools_4.2.1           gtable_0.3.1          glue_1.6.2           
##  [40] affy_1.76.0           LiblineaR_2.10-12     dplyr_1.0.10         
##  [43] naivebayes_0.9.7      Rcpp_1.0.9            MALDIquant_1.21      
##  [46] Biobase_2.58.0        jquerylib_0.1.4       fracdiff_1.5-2       
##  [49] vctrs_0.5.0           urca_1.3-3            preprocessCore_1.60.0
##  [52] nlme_3.1-160          iterators_1.0.14      lmtest_0.9-40        
##  [55] timeDate_4021.106     xfun_0.34             stringr_1.4.1        
##  [58] rbibutils_2.2.9       lifecycle_1.0.3       XML_3.99-0.12        
##  [61] DEoptimR_1.0-11       zlibbioc_1.44.0       MASS_7.3-58.1        
##  [64] zoo_1.8-11            scales_1.2.1          MSnbase_2.24.0       
##  [67] pcaMethods_1.90.0     hms_1.1.2             ProtGenerics_1.30.0  
##  [70] parallel_4.2.1        RColorBrewer_1.1-3    yaml_2.3.6           
##  [73] quantmod_0.4.20       curl_4.3.3            gridExtra_2.3        
##  [76] ggplot2_3.3.6         sass_0.4.2            rpart_4.1.19         
##  [79] latticeExtra_0.6-30   stringi_1.7.8         highr_0.9            
##  [82] S4Vectors_0.36.0      tseries_0.10-52       foreach_1.5.2        
##  [85] checkmate_2.1.0       TTR_0.24.3            BiocGenerics_0.44.0  
##  [88] BiocParallel_1.32.0   Rdpack_2.4            rlang_1.0.6          
##  [91] pkgconfig_2.0.3       mzID_1.36.0           evaluate_0.17        
##  [94] lattice_0.20-45       purrr_0.3.5           htmlwidgets_1.5.4    
##  [97] tidyselect_1.2.0      plyr_1.8.7            magrittr_2.0.3       
## [100] bookdown_0.29         R6_2.5.1              magick_2.7.3         
## [103] IRanges_2.32.0        generics_0.1.3        Hmisc_4.7-1          
## [106] DBI_1.1.3             pillar_1.8.1          foreign_0.8-83       
## [109] MsCoreUtils_1.10.0    xts_0.12.2            survival_3.4-0       
## [112] nnet_7.3-18           tibble_3.1.8          crayon_1.5.2         
## [115] interp_1.1-3          utf8_1.2.2            rmarkdown_2.17       
## [118] jpeg_0.1-9            progress_1.2.2        grid_4.2.1           
## [121] data.table_1.14.4     forecast_8.18         digest_0.6.30        
## [124] tidyr_1.2.1           stats4_4.2.1          munsell_0.5.0        
## [127] bslib_0.4.0           quadprog_1.5-8

References

1. Kristensen AR, Gsponer J, Foster LJ (2012) A high-throughput approach for measuring temporal changes in the interactome. Nature Methods 9(9):907–909.

2. Havugimana PC, et al. (2012) A census of human soluble protein complexes. Cell 150(5):1068–1081.

3. Kirkwood KJ, Ahmad Y, Larance M, Lamond AI (2013) Characterisation of native protein complexes and protein isoform variation using size-fractionation based quantitative proteomics. Molecular & Cellular Proteomics:mcp–M113.

4. Scott NE, et al. (2017) Interactome disassembly during apoptosis occurs independent of caspase cleavage. Molecular Systems Biology 13(1):906.

5. Skinnider MA, et al. (2018) An atlas of protein-protein interactions across mammalian tissues. bioRxiv:351247.

6. Skinnider MA, Stacey RG, Foster LJ (2018) Genomic data integration systematically biases interactome mapping. PLoS Computational Biology 14(10):e1006474.

7. Giurgiu M, et al. (2018) CORUM: The comprehensive resource of mammalian protein complexes—2019. Nucleic Acids Research.

8. Stacey RG, Skinnider MA, Chik JH, Foster LJ (2018) Context-specific interactions in literature-curated protein interaction databases. BMC Genomics 19(1):758.

9. Meldal BH, et al. (2018) Complex portal 2018: Extended content and enhanced visualization tools for macromolecular complexes. Nucleic Acids Research.

10. Riniker S, Fechner N, Landrum GA (2013) Heterogeneous classifier fusion for ligand-based virtual screening: Or, how decision making by committee can be a good thing. Journal of chemical information and modeling 53(11):2829–2836.

11. Tan CSH, et al. (2018) Thermal proximity coaggregation for system-wide profiling of protein complex dynamics in cells. Science 359(6380):1170–1177.