1 Introduction

systemPipeShiny (SPS) extends the widely used systemPipeR (SPR) workflow environment with a versatile graphical user interface provided by a Shiny App. This allows non-R users, such as experimentalists, to run many systemPipeR’s workflow designs, control, and visualization functionalities interactively without requiring knowledge of R. Most importantly, SPS has been designed as a general purpose framework for interacting with other R packages in an intuitive manner. Like most Shiny Apps, SPS can be used on both local computers as well as centralized server-based deployments that can be accessed remotely as a public web service for using SPR’s functionalities with community and/or private data. The framework can integrate many core packages from the R/Bioconductor ecosystem. Examples of SPS’ current functionalities include: (a) interactive creation of experimental designs and metadata using an easy to use tabular editor or file uploader; (b) visualization of workflow topologies combined with auto-generation of R Markdown preview for interactively designed workflows; (c) access to a wide range of data processing routines; (d) and an extendable set of visualization functionalities. Complex visual results can be managed on a ‘Canvas Workbench’ allowing users to organize and to compare plots in an efficient manner combined with a session snapshot feature to continue work at a later time. The present suite of pre-configured visualization examples include different methods to plot a count table. The modular design of SPR makes it easy to design custom functions without any knowledge of Shiny, as well as extending the environment in the future with contributions from the community.

This vignette only includes the basics of SPS. For full documentations of SPS, visit our website at: https://systempipe.org/sps.

2 Demos

SPS has provided a variety of options to change how it work. Here are some examples. At the time of writing, there is an interactive tutorial (guide) embedded in the demos that users can access from the upper-right corner. The tutorial introduces major functionalities of SPS.

Type and link option changed notes
Default full installation See installation full app, may take longer (~15s) to load
Minimum installation See installation no modules installed
Login enabled login_screen = TRUE; login_theme = "empty" no modules installed
Login and login themes login_screen = TRUE; login_theme = "random" no modules installed
App admin page admin_page = TRUE use the link or simply add “?admin” to the end of URL of any demos

For the login required demos, the app account name is “user” password “user”.

For the admin login, account name “admin”, password “admin”.

Please DO NOT delete or change password when you are trying the admin features. Although shinyapps.io will reset the app once a while, this will affect other people who are viewing the demo simultaneously.

3 Installation

3.0.1 Full

if (!requireNamespace("BiocManager", quietly=TRUE))
    install.packages("BiocManager")
BiocManager::install("systemPipeShiny", dependencies=TRUE)

This will install all required packages including suggested packages that are required by the core modules. Be aware, it will take quite some time if you are installing on Linux where only source installation is available. Windows and Mac binary installations will be much faster.

3.0.2 Minimum

To install the package, please use the BiocManager::install command:

if (!requireNamespace("BiocManager", quietly=TRUE))
    install.packages("BiocManager")
BiocManager::install("systemPipeShiny")

By the minimum installation, all the 3 core modules are not installed. You can still start the app, and when you start the app and click on these modules, it will tell to enable these modules, what packages to install and waht command you need to run. Just follow the instructions. Install as you need.

3.0.3 Most recent

To obtain the most recent updates immediately, one can install it directly from GitHub as follow:

if (!requireNamespace("remotes", quietly=TRUE))
    install.packages("remotes")
remotes::install("systemPipeR/systemPipeShiny", dependencies=TRUE)

Similarly, remotes::install("systemPipeR/systemPipeShiny") for the minimum develop version.

3.0.4 Linux

If you are on Linux, you may also need the following libraries before installing SPS. Different distributions may have different commands, but the following commands are examples for Ubuntu:

sudo apt-get install libcurl4-openssl-dev
sudo apt-get install libv8-dev
sudo apt-get install libxm12-dev
sudo apt-get install libssl-dev

4 Main functionalities

Currently, SPS includes 5 main functional categories (Fig 1):

  1. Pre-defined modules include (open-box ready):
    1. A workbench for designing and configuring data analysis workflows,
    2. Downstream analysis and visualization tools for RNA-Seq, and
    3. A space to make quick ggplots.
  2. A section with user custom tabs: users define their own SPS tabs.
  3. An image editing tab “Canvas” which allows users to edit plots made from the previous two categories.
  4. Login / admin feature: deploy-ready app security and management toolkits.
  5. Deep customization: user defined app tabs, looking, notification, tutorials, and more.

Besides, SPS provides many functions to extend the default Shiny development, like more UI components, server functions and useful general R ulitlieslike error catching, logging, and more. These functionalitlies are distributed as SPS supporting packages: spsComps, drawer, and spsUtil.

SPS_structure

Figure 1. Design of systemPipeShiny.

The framework provides an interactive web interface for workflow management and data visualization.

Within the functional categories, SPS functions are modularized in sub-components, here referred to as SPS tabs that are similar to menu tabs in other GUI applications that organize related and inter-connected functionalies into groups. On the backend, SPS tabs are based on Shiny modules, that are stored in separate files. This modular structure is highly extensible and greatly simplifies the design of new SPS tabs by both users and/or developers. Details about extending existing tabs and designing new ones are provided in advanced sections on our website.

5 SPS example usage

The following instructions go through use each module step by step.

Please read our website: https://systempipe.org/sps/ for full instructions, animations, videos, and advanced sections.

5.1 Load package

Load the systemPipeShiny package in your R session.

library(systemPipeShiny)

5.2 Initialize SPS project

Before launching the SPS application, a project environment needs to be created with the following command.

spsInit()

For this toy example, the project directory structure is written to a temporary directory on a user’s system. For a real project, it should be written to a defined and user controlled location on a system rather than a temporary directory.

sps_tmp_dir <- tempdir()
spsInit(app_path = sps_tmp_dir, change_wd = FALSE, project_name = "SPSProject")
## [SPS-INFO] 2021-05-19 18:57:56 Start to create a new SPS project
## [SPS-INFO] 2021-05-19 18:57:56 Create project under /tmp/RtmpQQN0M3/SPSProject
## [SPS-INFO] 2021-05-19 18:57:56 Now copy files
## [SPS-INFO] 2021-05-19 18:57:56 Create SPS database
## [SPS-INFO] 2021-05-19 18:57:56 Created SPS database method container
## [SPS-INFO] 2021-05-19 18:57:56 Creating SPS db...
## [SPS-DANGER] 2021-05-19 18:57:56 Done, Db created at '/tmp/RtmpQQN0M3/SPSProject/config/sps.db'. DO NOT share this file with others or upload to open access domains.
## [SPS-INFO] 2021-05-19 18:57:56 Key md5 824bb1e218af8163ce370ef97e0117ad
## [SPS-INFO] 2021-05-19 18:57:56 SPS project setup done!
sps_dir <- file.path(sps_tmp_dir, "SPSProject")

5.2.1 SPS project structure

The file and directory structure of an SPS project is organized as follows.

SPS_xx/  
├── server.R               | 
├── global.R               | Most important server, UI and global files, unless special needs, `global.R` is the only file you need to edit manually   
├── ui.R                   |  
├── deploy.R               | Deploy helper file  
├── config                 | Important app config files. Do not edit them if you don't know  
│   ├── sps.db             | SPS database 
│   ├── sps_options.yaml   | SPS default option list 
│   └── tabs.csv           | SPS tab information 
├── data                   | App example data files 
│   ├── xx.csv             
├── R                      | All SPS additional tab files and helper R function files 
│   ├── tab_xx.R            
├── README.md              
├── results                | Not in use for this current version, you can store some data been generated from the app 
│   └── README.md          
└── www                    | Internet resources  
    ├── about              | About tab information 
    │   └── xx.md          
    ├── css                | CSS files  
    │   └── sps.css         
    ├── img                | App image resources    
    │   └── xx.png         
    ├── js                 | Javascripts
    │   └── xx.js           
    ├── loading_themes     | Loading screen files 
    │   └── xx.html         
    └── plot_list          | Image files for plot gallery  
        └── plot_xx.jpg      

5.3 Launch SPS

By default, the working directory will be set inside the project folder automatically. To launch the SPS Shiny application, one only needs to execute the following command.

shiny::runApp()

After the SPS app has been launched, clicking the “Continue to app” button on the welcome screen will open the main dashboard (Fig.2).

sps_ui

Figure 2: Snapshot of SPS’ UI.

  1. Welcome screen.
  2. Module tabs.
  3. User defined custom tabs.
  4. The Canvas tab.
  5. All SPS tabs has this description on top. It is highly recommend to click here to expand and read the full the description for the first time.

Alternatively, when using RStudio one can click the Run App button in the top right corner.

In addition, in Rstudio the global.R file will be automatically opened when the SPS project is created. Custom changes can be made inside this file before the app launches. The advanced section explains how to change and create new custom tabs.

5.4 Workflow management

The workflow management module in SPS allows one to modify or create the configuration files required for running data analysis workflows in systemPipeR (SPR). This includes three types of important files: a sample metadata (targets) file, a workflow file (in R Markdown format) defining the workflow steps, and workflow running files in Common Workflow Language (CWL) format. In SPS, one can easily create these files under the “Workflow Management” module, located in navigation bar on the left of the dashboard (Fig2 - 2).

The current version of SPS allows to:

  1. create a workflow environment;
  2. create and/or check the format of targets / workflow / CWL files;
  3. download the prepared workflow files to run elsewhere, like a cluster;
  4. directly execute the workflow from SPS.

5.4.1 1. setup a workflow

wf_setup

Figure 3. A. Workflow Management - Targets File

  1. In the workflow module, read the instructions and choose step 1. Step 1 should be automatically opened for you on start.
  2. Choose a folder where you want to create the workflow environment.
  3. Choose a workflow template. These are SPR workflows and mainly are next-generation sequencing workflows.
  4. Click “Gen workflow” to create the workflow project.
  5. You should see a pop-up saying about the project path and other information. Clicking the pop-up will jump you to the step 2. The status tracker and banner for step 1 should all turn green.

5.4.2 2. Prepare a target file

The targets file defines all input file paths and other sample information of analysis workflows. To better undertand the structure of this file, one can consult the “Structure of targets file” section in the SPR vignette. Essentially, this is the tabular file representation of the colData slot in an SummarizedExperiment object which stores sample IDs and other meta information.

The following step-by-step instructions explain how to create and/or modify targets files using RNA-Seq as an example (Fig.3 A):

  1. Your project targets file is loaded for you, but you can choose to upload a different one.
  2. You can edit, right click to add/remove rows/columns (The first row is treated as column names).
  3. SPR target file includes a header block, that can also be edited in the SPS app. Each headers needs to start with a “#”. Header is only useful for RNA-Seq workflow in current SPR. You can define sample comparison groups here. Leave it as default for other projects.
  4. The section on the left provides sample statistics and information whether files exist inside the workflow project’s data directory. Choose any column you want from the dropdown to check and watch the statistics bar change in this section.
  5. statistic status bar.
  6. Clicking on “Add to task” can help you to check if your target file has any formatting problem. You should see a green success pop-up if everything is right. Now your target file is ready and you can click “save” to download it and later use in a SPR project.
wf_targets

Figure 3. A. Workflow Management - Targets File

5.4.3 3. Prepare a workflow file

In SPR, workflows are defined in Rmarkdown files, you can read details and obtain them here.

Now let us follow the order below to see how SPS helps you to prepare a workflow file for a RNAseq project (Fig.3 B):

  1. Your project workflow file is loaded for you, but you can choose to upload a different one.
  2. The workflow structure is displayed in a tree-leaf-like plot.
  3. Check all steps in the workflow that you want to include. You can skip (uncheck) some steps but it may cause the workflow to fail. Read more SPR instructions before do so.
  4. Clicking on the “Plot steps” will show a flow chart of what the step execution orders will be when you run the workflow in SPR.
  5. Clicking “Report preview” generates a preview of what the final report will look like for current RNAseq workflow (hidden in Fig 3.B), but in the preview, no code is evaluated.
  6. If you are satisfied with your workflow file, click “Add to task” to save your workflow file.
wf_wf

Figure 3. B. Workflow Management - Workflow File

5.4.4 4. Prepare CWL files (optional)

In the new version of SPR, all individual system workflow steps are called by the CWL files. Each SPR workflow has a set of CWL files and normally users do not need to make any change. In case you want to learn more about CWL and create some new CWL files, Step 4 is a good place to practice.

To run a CWL step in SPR, 3 files are required:

  • targets: to determine how many samples will be run and sample names.
  • CWL running file: can be translated to bash code;
  • CWL input: variables to inject into the running file

SPR is the parser between R and CWL by injecting sample information from targets to CWL input file and then CWL parser translates it to bash code.

  1. Most people are not familiar this part, so read instructions carefully.
  2. Your project targets has been loaded for you, and an example CWL running and input for hisat2 is also loaded for you. Directly parse the code. See what commandline code you get.
  3. Change the targets injecting column, and parse again, see what has changed.
  4. You can edit the CWL running and input files
  5. Try to parse the new file and see what has changed.
  6. If new CWL files has been created, you can edit workflow Rmd files by adding your new steps.
wf_cwl

Figure 3. C. Workflow Management - CWL File

5.4.5 5. Run or finish workflow preparation

Up until this step, congratulations, the workflow is prepared. You can choose to download the workflow project files as a bundle or continue to run the workflow.

wf_cwl

Figure 4.A.B Workflow Runner

  1. On step 5 you can choose to download the prepared workflow or directly run the workflow. However, if you do not have the required commandline tools, workflow will most likely fail. Make sure you system has these tools (Read about these tools).
  2. Open up the runner. It is a “Rstudio-like” interface.
  3. Code editor. Required workflow running code is pre-entered for you. You can simply hit “Run” to start. Of course, you can delete the default code and run random R code.
  4. Output R console.
  5. Workflow running log.
  6. View any plot output. and send a copy of your current plot to SPS Canvas tab or download it.

5.5 RNA-Seq Module

This is a module which takes a raw count table to do normalization, Differential gene expression (DEG) analysis, and finally helps users to generate different plots to visualize the results.

5.5.1 Prepare metadata and count table

To start, we require two files, the metadata file (targets) and a raw count table (Fig. 5).

rna_data

Figure 5 RNAseq

  1. This is the RNAseq module UI when you first click it. All sub-tabs are disbled at the beginning. Other tabs will enabled as you proceed with different options.
  2. First, we need a metadata file to tell SPS what samples and conditions to use. Here, we use the metadata file from SPR, which is also known as “targets” file. If you are not familiar with the targets file, we suggest to use the workflow module step 2 to practice creating and checking the format. You can also use the example to see how it looks like.
  3. The loaded targets table is display here. You can use the box below each column name to filter what samples to include/exclude. Only the “SampleName” and “Factor” columns are used, other columns are ignored. SampleName should be a unique character string without space for each row. Factor is the experiment design factors, or conditions, or treatments.
  4. If you want to DEG analysis, DEG comparison groups are defined in the targets file header.
  5. The header will be parsed into comparison groups which contain individual comparisons. If the parsed comparison is not what you want, edit the header lines and reupload.
  6. If everything is expected, confirm to use this table.
  7. You should see the progress timeline of step 1 becomes green if your targets and header pass the format checking.
  8. (Not on figure) Similarly, use example or upload a count table and confirm to use it.

Note: For the count table, the first column will be used as gene names. Other column names will be treated as sample names, and values in these columns are treated as raw counts. Make sure columns except the first one are numeric, and replace NA with 0.

Upon successfully confirm targets and count table, you should see the “Normalize Data” subtab is enabled. You can click on the top navigation or click the pop-up for the next step.

5.5.2 Process raw count

If this UI is displayed, that means your targets and count table are accepted by SPS (Fig 6). On this sub-tab, you can choose:

  1. Transform your count data with “raw”, “rlog” or “VST” and visualize the results in other sub-tabs.
  2. Do DEG analysis.

These two options are independent.

rna_norm

Figure 6 RNAseq Normalization

  1. At step 1 panel, choose how SPS can help you, count transformation or DEG analysis. The former will jump you to step 2, latter will jump to step 3.
  2. There are many options. If you are not clear, hover your mouse on the option, and some tips will show up.
  3. To start data transformation or DEG analysis.
  4. A gallery of different plot options will show up when the data process is done.
  5. When the data process is done, you can download results from the right side panel. Check all items you want and SPS will help you to zip it into one file to download.
  6. If at least one item is checked, downloading is enabled.
  7. Progress timeline will also change upon successful data process.
  8. Different visualization options will be enabled depending on the data process options.

5.5.3 Plot options

SPS RNAseq module provides 6 different plot options to cluster transformed count table.

rna_plot

Figure 6 RNAseq plots

  1. Change plot options to customize your plots.
  2. Most plots are Plotly plots, which means you can interact with these plots, like hiding/show groups, zoom in/out, etc.
  3. All SPS plots are resizable. Dragging the bottom-right corner icon to resize your plot.
  4. Click “To canvas” to take a screenshot of current plot and edit it in SPS Canvas tab. Or clicking the down-arrow button to directly save current plot to a png or jpg.

5.5.4 DEG report

This is a special sub-tab designed to filter and visualize DEG results. This sub-tab can be accessed once the DEG is calculated on the “Normalize Data” sub-tab.

rna_deg

Figure 7 RNAseq DEG

  1. DEG summary plot. You can view what are the DEG results across different comparision groups.
  2. Switch to view a ggplot friendly table. Different from the table you could download from “Normalize Data” subtab, this DEG table is rearranged so you can easily make a ggplot from it.
  3. You can change the filter settings here, so DEGs will be re-filtered and you do not need to go back to “Normalize Data” subtab to recalculate DEG.
  4. DEG plotting options. Choose from a volcano plot, an upset plot (intersection), a MA plot or a heatmap.

5.5.5 Interact with other bioconductor packages.

5.5.5.1 Locally

If you are familiar with R and want to continue other analysis after these, simple stop SPS:

  1. After count transformation, there is a spsRNA_trans object stored in your R environment. raw method gives you a normalized count table. Other two methods give you a DESeq2 class object. You can use it for other analysis.
  2. After DEG analysis, SPS stores a global object called spsDEG. It is a summerizedExperiment object which has all individual tables from all DEG comparisons. You can use it for other downstream analysis.

5.5.5.2 Remotely

If you are using SPS from a remote server, you can choose to download results from “Normalize Data” sub-tab. Choose results in tabular format or summerizedExperiment format which is saved in a .rds file.

5.6 Quick {ggplot} module

This module enables you to quickly upload datasets and make a {ggplot} in a second by using some functionalities from {Esquisse}.

quickgg

Figure 8 Quick ggplot

  1. Provide a tabular data table by uploading or use example.
  2. Drag variables from into different ggplot aesthetic boxes to make a ggplot.
  3. Change to different plot types.
  4. Customize other different plotting options.

For a more specific guide, read Esquisse official guide.

5.7 Canvas

SPS Canvas is a place to display and edit scrennshots from different plots. To start to use Canvas, you need to take some screenshots but clicking “To Canvas” buttons on different tabs/modules. After clicking, the screenshots will be automatically sent from these places to this Canvas.

plot_tab

plot_tab

Figure 9 Canvas

  1. The Canvas area.
  2. Canvas drawing grids. By default, your objects are limited to these drawing grids, but you can change it from top options inside “canvas”. The grid area size is automatically calculated to fit your screen size when you start SPS.
  3. Object information. When you select any object on the Canvas, a bounding box will show to display the object’s dimensions, scale, angle and other information. You can disable them in the “View” menu
  4. To edit your screenshots, simply drag your screenshots from left to Canvas working area.
  5. You can add text or titles, and change the font color, decorations in this panel.
  6. Different Canvas options. Several menus and buttons help you to better control the Canvas. Hover your mouse on buttons will display a tooltip of their functionality.

Keyboard shortcuts are also enabled with SPS Canvas. Go to “help” menu to see these options.

6 Advanced features

To read the detailed advanced features, please to go our website.

7 Session Information

sessionInfo()
## R version 4.1.0 (2021-05-18)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.2 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.13-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.13-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
## [1] systemPipeShiny_1.2.0 drawer_0.1.0          spsComps_0.3.0       
## [4] spsUtil_0.1.2         shiny_1.6.0           BiocStyle_2.20.0     
## 
## loaded via a namespace (and not attached):
##  [1] httr_1.4.2               sass_0.4.0               shinyFiles_0.9.0        
##  [4] tidyr_1.1.3              vroom_1.4.0              bit64_4.0.5             
##  [7] jsonlite_1.7.2           viridisLite_0.4.0        bslib_0.2.5.1           
## [10] assertthat_0.2.1         askpass_1.1              highr_0.9               
## [13] BiocManager_1.30.15      blob_1.2.1               yaml_2.2.1              
## [16] pillar_1.6.1             RSQLite_2.2.7            backports_1.2.1         
## [19] glue_1.4.2               digest_0.6.27            promises_1.2.0.1        
## [22] colorspace_2.0-1         htmltools_0.5.1.1        httpuv_1.6.1            
## [25] pkgconfig_2.0.3          bookdown_0.22            purrr_0.3.4             
## [28] xtable_1.8-4             scales_1.1.1             later_1.2.0             
## [31] tibble_3.1.2             openssl_1.4.4            styler_1.4.1            
## [34] generics_0.1.0           ggplot2_3.3.3            ellipsis_0.3.2          
## [37] DT_0.18                  cachem_1.0.5             shinyjs_2.0.0           
## [40] lazyeval_0.2.2           magrittr_2.0.1           crayon_1.4.1            
## [43] mime_0.10                memoise_2.0.0            evaluate_0.14           
## [46] shinytoastr_2.1.1        fs_1.5.0                 fansi_0.4.2             
## [49] shinydashboard_0.7.1     tools_4.1.0              data.table_1.14.0       
## [52] formatR_1.9              lifecycle_1.0.0          stringr_1.4.0           
## [55] plotly_4.9.3             munsell_0.5.0            shinyAce_0.4.1          
## [58] compiler_4.1.0           jquerylib_0.1.4          rlang_0.4.11            
## [61] shinyjqui_0.4.0          grid_4.1.0               shinydashboardPlus_2.0.1
## [64] rstudioapi_0.13          htmlwidgets_1.5.3        rmarkdown_2.8           
## [67] shinyWidgets_0.6.0       codetools_0.2-18         gtable_0.3.0            
## [70] DBI_1.1.1                R6_2.5.0                 knitr_1.33              
## [73] dplyr_1.0.6              fastmap_1.1.0            bit_4.0.4               
## [76] utf8_1.2.1               stringi_1.6.2            Rcpp_1.0.6              
## [79] vctrs_0.3.8              tidyselect_1.1.1         xfun_0.23