Introduction to Bioconductor for Sequence Data
3 June 2015
Contents
R version: R version 4.0.3 (2020-10-10)
Bioconductor version: 3.12
Package: 1.14.0
1 Abstract
Bioconductor enables the analysis and comprehension of high- throughput genomic data. We have a vast number of packages that allow rigorous statistical analysis of large data while keeping technological artifacts in mind. Bioconductor helps users place their analytic results into biological context, with rich opportunities for visualization. Reproducibility is an important goal in Bioconductor analyses. Different types of analysis can be carried out using Bioconductor, for example
- Sequencing : RNASeq, ChIPSeq, variants, copy number..
- Microarrays: expression, SNP, …
- Domain specific analysis : Flow cytometry, Proteomics ..
For these analyses, one typically imports and works with diverse sequence-related file types, including fasta, fastq, BAM, gtf, bed, and wig files, among others. Bioconductor packages support import, common and advanced sequence manipulation operations such as trimming, transformation, and alignment including quality assessment.
2 Sequencing Resources
Here is a illustrative description elaborating the different file types at various stages in a typical analysis, with the package names (in pink boxes) that one will use for each stage.
The following packages illustrate the diversity of functionality available; all are in the release version of Bioconductor.
IRanges and GenomicRanges for range-based (e.g., chromosomal regions) calculation, data manipulation, and general-purpose data representation. Biostrings for DNA and amino acid sequence representation, alignment, pattern matching (e.g., primer removal), and data manipulation of large biological sequences or sets of sequences. ShortRead for working with FASTQ files of short reads and their quality scores.
Rsamtools and GenomicAlignments for aligned read (BAM file) I/O and data manipulation. rtracklayer for import and export of diverse data formats (e.g., BED, WIG, bigWig, GTF, GFF) and manipualtion of tracks on the UCSC genome browser.
BSgenome for accessing and manipulating curated whole-genome representations. GenomicFeatures for annotation of sequence features across common genomes, biomaRt for access to Biomart databases.
SRAdb for querying and retrieving data from the Sequence Read Archive.
Bioconductor packages are organized by biocViews. Some of the entries under Sequencing and other terms, and representative packages, include:
ChIPSeq, e.g.,DiffBind, csaw, ChIPseeker, ChIPQC.
SNPs and other variants, e.g., VariantAnnotation, VariantFiltering, h5vc.
CopyNumberVariation e.g., DNAcopy, crlmm, fastseg.
Microbiome and metagenome sequencing, e.g., metagenomeSeq, phyloseq, DirichletMultinomial.
3 Ranges Infrastructure
Many Bioconductor packages rely heavily on the IRanges / GenomicRanges infrastructure. Thus we will begin with a quick introduction to these and then cover different file types.
The GenomicRanges package allows us to associate a
range of chromosome coordinates with a sequence name (e.g.,
chromosome) and a strand. Such genomic ranges are very useful for
describing both data (e.g., the coordinates of aligned reads, called
ChIP peaks, SNPs, or copy number variants) and annotations (e.g., gene
models, Roadmap Epigenomics regulatory elements, known clinically
relevant variants from dbSNP). GRanges is an object representing a
vector of genomic locations and associated annotations. Each element
in the vector is comprised of a sequence name, a range, a strand,
and optional metadata (e.g. score, GC content, etc.).
library(GenomicRanges)
GRanges(seqnames=Rle(c('chr1', 'chr2', 'chr3'), c(3, 3, 4)),
IRanges(1:10, width=5), strand='-',
score=101:110, GC = runif(10))Genomic ranges can be created ‘by hand’, as above, but are often the
result of importing data (e.g., via
GenomicAlignments::readGAlignments()) or annotation (e.g., via
GenomicFeatures::select() or rtracklayer::import() of BED, WIG,
GTF, and other common file formats). Use help() to list the help
pages in the GenomicRanges package, and vignettes()
to view and access available vignettes.
help(package="GenomicRanges")
vignette(package="GenomicRanges")Some of the common operations on GRanges include
findOverlaps(query, subject) and nearest(query, subject), which
identify the ranges in query that overlap ranges in subject, or
the range in subject nearest to `query. These operations are useful
both in data analysis (e.g., counting overlaps between aligned reads
and gene models in RNAseq) and comprehension (e.g., annotating genes
near ChIP binding sites).
4 DNA /amino acid sequence from FASTA files
Biostrings classes (e.g., DNAStringSet) are used to
represent DNA or amino acid sequences. In the example below we will
construct a DNAString and show some manipulations.
library(Biostrings)
d <- DNAString("TTGAAAA-CTC-N")
length(d) #no of letters in the DNAString## [1] 13We will download all Homo sapiens cDNA sequences from the FASTA file ‘Homo_sapiens.GRCh38.cdna.all.fa’ from Ensembl using AnnotationHub.
library(AnnotationHub)
ah <- AnnotationHub()This file is downloaded as a TwoBitFile
ah2 <- query(ah, c("fasta", "homo sapiens", "Ensembl", "cdna"))
dna <- ah2[["AH68262"]]
dna## TwoBitFile object
## resource: /tmp/RtmpOr5pHX/BiocFileCache/6a812f32682b_75008The sequences in the file can be read in using
getSeq() from the Biostrings package.
The sequences are returned as a DNAStringSet object.
getSeq(dna)## DNAStringSet object of length 187626:
## width seq names
## [1] 12 GGGACAGGGGGC ENST00000632684.1
## [2] 9 CCTTCCTAC ENST00000434970.2
## [3] 13 ACTGGGGGATACG ENST00000448914.1
## [4] 8 GAAATAGT ENST00000415118.1
## [5] 12 GGGACAGGGGGC ENST00000631435.1
## ... ... ...
## [187622] 1370 GGCTGAGTCTGGGCCCCAGGACCCGCATGC...GAAGCTTCCCAAGATGCAGCCGGGAGGTGA ENST00000639790.1
## [187623] 284 GGCGTCTACAAGAGACCTTCCTTCTCAGCT...TGAGTGATCAGCCCTAGATGACCACTGTTA ENST00000639660.1
## [187624] 105 TGCATCACTCTGGCATTGACTTCCTGGATT...CTGTCCTTCTGTGGACCCCAGAAAGTTAAT ENST00000643577.1
## [187625] 900 ATGGGATGTCACCAATCAATGGTCACAGAA...AGGGCACTGAGGAAGGAGAGGCTGATGTAA ENST00000646356.1
## [187626] 930 ATGGGAGTCAACCAATCATGGGTCACAGAA...CACAGAGCACTGCAGAGGACGCTGTCTATG ENST00000645792.1BSgenome packages inside Bioconductor contain whole
genome sequences as distributed by ENSEMBL, NCBI and others. In this
next example we will load the whole genome sequence for Homo sapiens
from UCSC’s hg19 build, and calculate the GC content across
chromosome 14.
library(BSgenome.Hsapiens.UCSC.hg19)
chr14_range = GRanges("chr14", IRanges(1, seqlengths(Hsapiens)["chr14"]))
chr14_dna <- getSeq(Hsapiens, chr14_range)
letterFrequency(chr14_dna, "GC", as.prob=TRUE)## G|C
## [1,] 0.3362765 Reads from FASTQ files
ShortRead package from Bioconductor can be used for working with fastq files. Here we illustrate a quick example where one can read in multiple fasta files, collect some statistics and generate a report about the same.
BiocParallel is another package from Bioconductor which parallelizes this task and speeds up the process.
## 1. attach ShortRead and BiocParallel
library(ShortRead)
library(BiocParallel)
## 2. create a vector of file paths
fls <- dir("~/fastq", pattern="*fastq", full=TRUE)
## 3. collect statistics
stats0 <- qa(fls)
## 4. generate and browse the report
if (interactive())
browseURL(report(stats0))Two useful functions in ShortRead are trimTails() for
processing FASTQ files, and FastqStreamer() for iterating through
FASTQ files in manageable chunks (e.g., 1,000,000 records at a time).
6 Aligned Reads from BAM files
The GenomicAlignments package is used to input reads aligned to a reference genome.
In this next example, we will read in a BAM file and specifically read in reads supporting an apparent exon splice junction spanning position 19653773 of chromosome 14.
The package RNAseqData.HNRNPC.bam.chr14_BAMFILES
contains 8 BAM files. We will use only the first BAM file. We will
load the software packages and the data package, construct a GRanges
with our region of interest, and use summarizeJunctions() to find
reads in our region of interest.
## 1. load software packages
library(GenomicRanges)
library(GenomicAlignments)
## 2. load sample data
library('RNAseqData.HNRNPC.bam.chr14')
bf <- BamFile(RNAseqData.HNRNPC.bam.chr14_BAMFILES[[1]], asMates=TRUE)
## 3. define our 'region of interest'
roi <- GRanges("chr14", IRanges(19653773, width=1))
## 4. alignments, junctions, overlapping our roi
paln <- readGAlignmentsList(bf)
j <- summarizeJunctions(paln, with.revmap=TRUE)
j_overlap <- j[j %over% roi]
## 5. supporting reads
paln[j_overlap$revmap[[1]]]## GAlignmentsList object of length 8:
## [[1]]
## GAlignments object with 2 alignments and 0 metadata columns:
## seqnames strand cigar qwidth start end width njunc
## <Rle> <Rle> <character> <integer> <integer> <integer> <integer> <integer>
## [1] chr14 - 66M120N6M 72 19653707 19653898 192 1
## [2] chr14 + 7M1270N65M 72 19652348 19653689 1342 1
## -------
## seqinfo: 93 sequences from an unspecified genome
##
## [[2]]
## GAlignments object with 2 alignments and 0 metadata columns:
## seqnames strand cigar qwidth start end width njunc
## <Rle> <Rle> <character> <integer> <integer> <integer> <integer> <integer>
## [1] chr14 - 66M120N6M 72 19653707 19653898 192 1
## [2] chr14 + 72M 72 19653686 19653757 72 0
## -------
## seqinfo: 93 sequences from an unspecified genome
##
## [[3]]
## GAlignments object with 2 alignments and 0 metadata columns:
## seqnames strand cigar qwidth start end width njunc
## <Rle> <Rle> <character> <integer> <integer> <integer> <integer> <integer>
## [1] chr14 + 72M 72 19653675 19653746 72 0
## [2] chr14 - 65M120N7M 72 19653708 19653899 192 1
## -------
## seqinfo: 93 sequences from an unspecified genome
##
## ...
## <5 more elements>For a detailed tutorial on working with BAM files do check out this detailed Overlap Encodings vignette of GenomicAlignments.
7 Called Variants from VCF files
VCF (Variant Call Files) describe SNP and other variants. The files contain meta-information lines, a header line with column names, and then (many!) data lines, each with information about a position in the genome, and optional genotype information on samples for each position.
Data are parsed into a VCF object with readVcf()
from VariantAnnoation
library(VariantAnnotation)
fl <- system.file("extdata", "chr22.vcf.gz", package="VariantAnnotation")
vcf <- readVcf(fl, "hg19")An excellent workflow on working with Variants can be found
here. In
particular it is possible to read in specific components of the VCF
file (e.g., readInfo(), readGeno()) and parts of the VCF at
specific genomic locations (using GRanges and the param = ScanVcfParam()
argument to input functions).
8 Genome Annotations from BED, WIG, GTF etc files
rtracklayer import and export functions can read in many common file types, e.g., BED, WIG, GTF, …, in addition to querying and navigating the UCSC genome browser.
rtracklayer contains a ‘test’ BED file which we will read in here
library(rtracklayer)
test_path <- system.file("tests", package = "rtracklayer")
test_bed <- file.path(test_path, "test.bed")
test <- import(test_bed, format = "bed")
test## UCSC track 'ItemRGBDemo'
## UCSCData object with 5 ranges and 5 metadata columns:
## seqnames ranges strand | name score itemRgb thick
## <Rle> <IRanges> <Rle> | <character> <numeric> <character> <IRanges>
## [1] chr7 127471197-127472363 + | Pos1 0 #FF0000 127471197-127472363
## [2] chr7 127472364-127473530 + | Pos2 2 #FF0000 127472364-127473530
## [3] chr7 127473531-127474697 - | Neg1 0 #FF0000 127473531-127474697
## [4] chr9 127474698-127475864 + | Pos3 5 #FF0000 127474698-127475864
## [5] chr9 127475865-127477031 - | Neg2 5 #0000FF 127475865-127477031
## blocks
## <IRangesList>
## [1] 1-300,501-700,1068-1167
## [2] 1-250,668-1167
## [3] 1-1167
## [4] 1-1167
## [5] 1-1167
## -------
## seqinfo: 2 sequences from an unspecified genome; no seqlengthsThe file is returned to the user as a GRanges instance. A more detailed tutorial can be found here
AnnotationHub also contains a variety of genomic annotation files (eg BED, GTF, BigWig) which use import() from rtracklayer behind the scenes. For a detailed tutorial the user is referred to Annotation workflow and AnnotationHub HOW TO vignette
sessionInfo()## R version 4.0.3 (2020-10-10)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 18.04.5 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.12-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.12-bioc/R/lib/libRlapack.so
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C LC_TIME=en_US.UTF-8
## [4] LC_COLLATE=C LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C LC_ADDRESS=C
## [10] LC_TELEPHONE=C LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## attached base packages:
## [1] parallel stats4 stats graphics grDevices utils datasets methods base
##
## other attached packages:
## [1] RNAseqData.HNRNPC.bam.chr14_0.28.0 BSgenome.Hsapiens.UCSC.hg19_1.4.3
## [3] BSgenome_1.58.0 AnnotationHub_2.22.0
## [5] BiocFileCache_1.14.0 dbplyr_1.4.4
## [7] VariantAnnotation_1.36.0 rtracklayer_1.50.0
## [9] ShortRead_1.48.0 BiocParallel_1.24.0
## [11] GenomicAlignments_1.26.0 Rsamtools_2.6.0
## [13] Biostrings_2.58.0 XVector_0.30.0
## [15] SummarizedExperiment_1.20.0 Biobase_2.50.0
## [17] MatrixGenerics_1.2.0 matrixStats_0.57.0
## [19] GenomicRanges_1.42.0 GenomeInfoDb_1.26.0
## [21] IRanges_2.24.0 S4Vectors_0.28.0
## [23] BiocGenerics_0.36.0 BiocStyle_2.18.0
##
## loaded via a namespace (and not attached):
## [1] bitops_1.0-6 bit64_4.0.5 RColorBrewer_1.1-2
## [4] progress_1.2.2 httr_1.4.2 tools_4.0.3
## [7] R6_2.5.0 DBI_1.1.0 tidyselect_1.1.0
## [10] prettyunits_1.1.1 bit_4.0.4 curl_4.3
## [13] compiler_4.0.3 xml2_1.3.2 DelayedArray_0.16.0
## [16] bookdown_0.21 askpass_1.1 rappdirs_0.3.1
## [19] stringr_1.4.0 digest_0.6.27 rmarkdown_2.5
## [22] jpeg_0.1-8.1 pkgconfig_2.0.3 htmltools_0.5.0
## [25] fastmap_1.0.1 rlang_0.4.8 RSQLite_2.2.1
## [28] shiny_1.5.0 generics_0.0.2 hwriter_1.3.2
## [31] dplyr_1.0.2 RCurl_1.98-1.2 magrittr_1.5
## [34] GenomeInfoDbData_1.2.4 Matrix_1.2-18 Rcpp_1.0.5
## [37] lifecycle_0.2.0 stringi_1.5.3 yaml_2.2.1
## [40] zlibbioc_1.36.0 grid_4.0.3 blob_1.2.1
## [43] promises_1.1.1 crayon_1.3.4 lattice_0.20-41
## [46] GenomicFeatures_1.42.0 hms_0.5.3 knitr_1.30
## [49] pillar_1.4.6 biomaRt_2.46.0 XML_3.99-0.5
## [52] glue_1.4.2 BiocVersion_3.12.0 evaluate_0.14
## [55] latticeExtra_0.6-29 BiocManager_1.30.10 png_0.1-7
## [58] vctrs_0.3.4 httpuv_1.5.4 openssl_1.4.3
## [61] purrr_0.3.4 assertthat_0.2.1 xfun_0.18
## [64] mime_0.9 xtable_1.8-4 later_1.1.0.1
## [67] tibble_3.0.4 AnnotationDbi_1.52.0 memoise_1.1.0
## [70] ellipsis_0.3.1 interactiveDisplayBase_1.28.0