distinct: a method for differential analyses via hierarchical permutation tests
10/27/2020
Package
distinct 1.2.0
Contents
1 Introduction
distinct is a statistical method to perform differential testing between two or more groups of distributions; differential testing is performed via hierarchical non-parametric permutation tests on the cumulative distribution functions (cdfs) of each sample. While most methods for differential expression target differences in the mean abundance between conditions, distinct, by comparing full cdfs, identifies, both, differential patterns involving changes in the mean, as well as more subtle variations that do not involve the mean (e.g., unimodal vs. bi-modal distributions with the same mean). distinct is a general and flexible tool: due to its fully non-parametric nature, which makes no assumptions on how the data was generated, it can be applied to a variety of datasets. It is particularly suitable to perform differential state analyses on single cell data (e.g., differential analyses within sub-populations of cells), such as single cell RNA sequencing (scRNA-seq) and high-dimensional flow or mass cytometry (HDCyto) data.
At present, covariates are not allowed, and only 2-group comparisons are implemented. In future releases, we will allow for covariates and for differential testing between more than 2 groups.
A pre-print will follow in the coming months.
To access the R code used in the vignettes, type:
browseVignettes("distinct")Questions relative to distinct should be either written to the Bioconductor support site, tagging the question with “distinct”, or reported as a new issue at BugReports (preferred choice).
To cite distinct, type:
citation("distinct")1.1 Bioconductor installation
distinct is available on Bioconductor and can be installed with the command:
if (!requireNamespace("BiocManager", quietly=TRUE))
install.packages("BiocManager")
BiocManager::install("distinct")2 Differential State analysis
Differential state analyses aim at investigating differential patterns between conditions in sub-populations of cells. To use distinct one needs data from two or more groups of samples (i.e., experimental conditions), with at least 2 samples (i.e., biological replicates) per group. Given a single-cell RNA-sequencing (scRNA-seq) or a high dimensional flow or mass cytometry (HDCyto) dataset, cells need first to be clustered in groups via some form of clustering algorithms; distinct is then applied to identify differential patterns between groups, within each cluster of cells.
2.1 Input data
Load the example dataset, consisting of a subset of 6 samples (3 individuals observed across 2 conditions) and 100 genes selected from the Kang18_8vs8() object of the muscData package.
library(SingleCellExperiment)
data("Kang_subset", package = "distinct")
Kang_subset## class: SingleCellExperiment
## dim: 100 9517
## metadata(1): experiment_info
## assays(2): logcounts cpm
## rownames(100): ISG15 SYF2 ... MX2 PDXK
## rowData names(0):
## colnames: NULL
## colData names(3): stim cell sample_id
## reducedDimNames(0):
## altExpNames(0):Columns ind and stim of the colData indicate the indivual id and the experimental condition (control or stimulated) of each cell, while column sample_id shows the sample id, needed for the differential anlyses.
Column cell represents the cell type, which defines the clustering structure of cells: differential testing between conditions is performed separately for each cluster of cells.
Note that, if cell clustering label was unknown, we would need to cluster cells into groups via some clustering algorithm.
colData(Kang_subset)## DataFrame with 9517 rows and 3 columns
## stim cell sample_id
## <factor> <factor> <factor>
## 1 ctrl CD4 T cells ctrl_107
## 2 ctrl CD14+ Monocytes ctrl_1015
## 3 ctrl NK cells ctrl_1015
## 4 ctrl CD4 T cells ctrl_107
## 5 ctrl CD14+ Monocytes ctrl_1015
## ... ... ... ...
## 9513 stim CD14+ Monocytes stim_1015
## 9514 stim CD4 T cells stim_101
## 9515 stim CD14+ Monocytes stim_101
## 9516 stim CD14+ Monocytes stim_107
## 9517 stim CD4 T cells stim_107The experimental design compares two groups (stim vs ctrl) with 3 biological replicates each.
Kang_subset@metadata$experiment_info## sample_id stim
## 1 ctrl_107 ctrl
## 2 ctrl_1015 ctrl
## 3 ctrl_101 ctrl
## 4 stim_101 stim
## 5 stim_1015 stim
## 6 stim_107 stim2.2 Differential analyses within sub-populations of cells
Load distinct.
library(distinct)Create the design of the study:
samples = Kang_subset@metadata$experiment_info$sample_id
group = Kang_subset@metadata$experiment_info$stim
design = model.matrix(~group)
# rownames of the design must indicate sample ids:
rownames(design) = samples
design## (Intercept) groupstim
## ctrl_107 1 0
## ctrl_1015 1 0
## ctrl_101 1 0
## stim_101 1 1
## stim_1015 1 1
## stim_107 1 1
## attr(,"assign")
## [1] 0 1
## attr(,"contrasts")
## attr(,"contrasts")$group
## [1] "contr.treatment"Perform differential state testing between conditions.
Parameter name_assays_expression specifies the input data (logcounts) in assays(x), while name_cluster and name_sample define the column names of colData(x) containing the clustering of cells (cell) and the id of individual samples (sample_id).
The group we would like to test for is in the second column of the design, therefore we will specify: column_to_test = 2.
Note that the sample names in colData(x)$name_sample have to be the same ones as those in rownames(design) (although not necessarily in the same order).
rownames(design)## [1] "ctrl_107" "ctrl_1015" "ctrl_101" "stim_101" "stim_1015" "stim_107"unique(colData(Kang_subset)$sample_id)## [1] ctrl_107 ctrl_1015 ctrl_101 stim_101 stim_1015 stim_107
## Levels: ctrl_101 ctrl_1015 ctrl_107 stim_101 stim_1015 stim_107In order to obtain a finer ranking for the most significant genes, if computational resources are available, we encourage users to increase P_4 (i.e., the number of permutations when a raw p-value is < 0.001) and set P_4 = 20,000 (by default P_4 = 10,000).
We strongly encourage using normalized data, such as counts per million (CPM) or log2-CPM (e.g., logcounts as created via scater::logNormCounts).
set.seed(61217)
res = distinct_test(x = Kang_subset,
name_assays_expression = "logcounts",
name_cluster = "cell",
name_sample = "sample_id",
design = design,
column_to_test = 2,
min_non_zero_cells = 20,
n_cores = 2)## 2 groups of samples provided## Data loaded, starting differential testing## Differential testing completed, returning results2.2.1 Handling covariates and batch effects
Covariates (such as batch effects), if present, can be added to the design matrix. In each cluster of cells, we fit a linear model, with covariates as predictors, and regress them out by performing differential analyeses on the residuals. By separately fitting a linear model on each cluster, we allow the effect of covariates to vary from cluster to cluster.
When specifying covariates, we highly recommend using log-normalized data, such as log2-CPMs (e.g., logcounts as created via scater::logNormCounts), because it is generally assumed that covariates (and particularly batch effects) have an approximately linear effect on the log or log2 scale of counts.
Assume samples are associated to three different batches; we modify the design to also include batches.
batch = factor(c("A", "B", "C", "A", "B", "C"))
design = model.matrix(~group + batch)
# rownames of the design must indicate sample ids:
rownames(design) = samples
design## (Intercept) groupstim batchB batchC
## ctrl_107 1 0 0 0
## ctrl_1015 1 0 1 0
## ctrl_101 1 0 0 1
## stim_101 1 1 0 0
## stim_1015 1 1 1 0
## stim_107 1 1 0 1
## attr(,"assign")
## [1] 0 1 2 2
## attr(,"contrasts")
## attr(,"contrasts")$group
## [1] "contr.treatment"
##
## attr(,"contrasts")$batch
## [1] "contr.treatment"We proceed as before to perform differential testing.
Again, we specify the column of the design to be tested via column_to_test = 2.
set.seed(61217)
res_batches = distinct_test(x = Kang_subset,
name_assays_expression = "logcounts",
name_cluster = "cell",
name_sample = "sample_id",
design = design,
column_to_test = 2,
min_non_zero_cells = 20,
n_cores = 2)## 2 groups of samples provided## Covariates detected## Data loaded, starting differential testing## Differential testing completed, returning results2.3 Visualizing results
Results are reported as a data.frame, where columns gene and cluster_id contain the gene and cell-cluster name, while p_val, p_adj.loc and p_adj.glb report the raw p-values, locally and globally adjusted p-values, via Benjamini and Hochberg (BH) correction.
In locally adjusted p-values (p_adj.loc) BH correction is applied in each cluster separately, while in globally adjusted p-values (p_adj.glb) BH correction is performed to the results from all clusters.
We can further compute the fold change (FC) and log2-FC between groups. To compute FCs, use normalized data, such as CPMs; do not use logarithm transformed data (e.g., logcounts).
res = log2_FC(res = res,
x = Kang_subset,
name_assays_expression = "cpm",
name_group = "stim",
name_cluster = "cell")## FC and log2_FC computed, returning resultsWe can visualize significant results via top_results function.
head(top_results(res))## gene cluster_id p_val p_adj.loc p_adj.glb filtered mean_ctrl
## 1 ISG15 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 198.0569
## 49 RPL7 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 6330.3843
## 57 SPI1 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 159.7687
## 58 CYB561A3 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 85.5813
## 61 PRDX5 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 382.3718
## 72 PSME2 B cells 9.999e-05 0.00139986 0.0007650398 FALSE 668.6966
## mean_stim FC_ctrl/stim log2FC_ctrl/stim
## 1 8577.04339 0.02309151 -5.4364934
## 49 4537.11929 1.39524308 0.4805165
## 57 21.60257 7.39582088 2.8867103
## 58 22.10346 3.87185071 1.9530233
## 61 136.40614 2.80318652 1.4870677
## 72 1574.42658 0.42472389 -1.2354028We can also visualize significant results for a specific cluster of cells.
top_results(res, cluster = "Dendritic cells")## gene cluster_id p_val p_adj.loc p_adj.glb filtered
## 401 ISG15 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 449 RPL7 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 472 PSME2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 499 MX2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 455 PPIF Dendritic cells 0.00059994 0.007439256 0.0036893507 FALSE
## 417 ARID5A Dendritic cells 0.00149925 0.015492254 0.0083602267 FALSE
## mean_ctrl mean_stim FC_ctrl/stim log2FC_ctrl/stim
## 401 262.99661 21085.06297 0.01247312 -6.3250333
## 449 3568.75526 2156.70504 1.65472570 0.7265921
## 472 785.99389 2291.26229 0.34303968 -1.5435526
## 499 41.46270 502.75503 0.08247097 -3.5999698
## 455 219.95768 30.93333 7.11070267 2.8299921
## 417 37.40927 181.37474 0.20625400 -2.2775060By default, results from ‘top_results’ are sorted by (globally) adjusted p-value; they can also be sorted by log2-FC.
top_results(res, cluster = "Dendritic cells", sort_by = "log2FC")## gene cluster_id p_val p_adj.loc p_adj.glb filtered
## 401 ISG15 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 499 MX2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 455 PPIF Dendritic cells 0.00059994 0.007439256 0.0036893507 FALSE
## 417 ARID5A Dendritic cells 0.00149925 0.015492254 0.0083602267 FALSE
## 472 PSME2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 449 RPL7 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## mean_ctrl mean_stim FC_ctrl/stim log2FC_ctrl/stim
## 401 262.99661 21085.06297 0.01247312 -6.3250333
## 499 41.46270 502.75503 0.08247097 -3.5999698
## 455 219.95768 30.93333 7.11070267 2.8299921
## 417 37.40927 181.37474 0.20625400 -2.2775060
## 472 785.99389 2291.26229 0.34303968 -1.5435526
## 449 3568.75526 2156.70504 1.65472570 0.7265921We can further filter results to visualize significant up- or down-regulated results only. Here we visualize the down-regulated gene-cluster results; i.e., results with lower expression in ‘ctlr’ group compared to ‘stim’.
top_results(res, up_down = "down",
cluster = "Dendritic cells")## gene cluster_id p_val p_adj.loc p_adj.glb filtered
## 401 ISG15 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 472 PSME2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 499 MX2 Dendritic cells 0.00009999 0.001549845 0.0007650398 FALSE
## 417 ARID5A Dendritic cells 0.00149925 0.015492254 0.0083602267 FALSE
## mean_ctrl mean_stim FC_ctrl/stim log2FC_ctrl/stim
## 401 262.99661 21085.0630 0.01247312 -6.325033
## 472 785.99389 2291.2623 0.34303968 -1.543553
## 499 41.46270 502.7550 0.08247097 -3.599970
## 417 37.40927 181.3747 0.20625400 -2.2775062.4 Plotting significant results
Density plot of one significant gene (ISG15) in Dendritic cells cluster.
plot_densities(x = Kang_subset,
gene = "ISG15",
cluster = "Dendritic cells",
name_assays_expression = "logcounts",
name_cluster = "cell",
name_sample = "sample_id",
name_group = "stim")
Instead of one curve per sample, we can also plot aggregated group-level curves by setting group_level = TRUE.
plot_densities(x = Kang_subset,
gene = "ISG15",
cluster = "Dendritic cells",
name_assays_expression = "logcounts",
name_cluster = "cell",
name_sample = "sample_id",
name_group = "stim",
group_level = TRUE)
CDF plot of one significant gene (ISG15) in Dendritic cells cluster.
plot_cdfs(x = Kang_subset,
gene = "ISG15",
cluster = "Dendritic cells",
name_assays_expression = "logcounts",
name_cluster = "cell",
name_sample = "sample_id",
name_group = "stim")
Violin plots of significant genes in Dendritic cells cluster.
# select cluster of cells:
cluster = "Dendritic cells"
sel_cluster = res$cluster_id == cluster
sel_column = Kang_subset$cell == cluster
# select significant genes:
sel_genes = res$p_adj.glb < 0.01
genes = as.character(res$gene[sel_cluster & sel_genes])
# make violin plots:
library(scater)## Loading required package: ggplot2plotExpression(Kang_subset[,sel_column],
features = genes, exprs_values = "logcounts",
log2_values = FALSE,
x = "sample_id", colour_by = "stim", ncol = 3) +
guides(fill = guide_legend(override.aes = list(size = 5, alpha = 1))) +
theme(axis.text.x = element_text(angle = 45, hjust = 1))
Visualize the concordance of differential results between cell clusters. We select as significant genes with globally adjusted p-value below 0.01.
library(UpSetR)
res_by_cluster = split( ifelse(res$p_adj.glb < 0.01, 1, 0), res$cluster_id)
upset(data.frame(do.call(cbind, res_by_cluster)), nsets = 10, nintersects = 20)
# Session info
sessionInfo()## R version 4.0.3 (2020-10-10)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 18.04.5 LTS
##
## Matrix products: default
## BLAS: /home/biocbuild/bbs-3.12-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.12-bioc/R/lib/libRlapack.so
##
## locale:
## [1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
## [3] LC_TIME=en_US.UTF-8 LC_COLLATE=C
## [5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
## [7] LC_PAPER=en_US.UTF-8 LC_NAME=C
## [9] LC_ADDRESS=C LC_TELEPHONE=C
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
##
## attached base packages:
## [1] parallel stats4 stats graphics grDevices utils datasets
## [8] methods base
##
## other attached packages:
## [1] UpSetR_1.4.0 scater_1.18.0
## [3] ggplot2_3.3.2 distinct_1.2.0
## [5] SingleCellExperiment_1.12.0 SummarizedExperiment_1.20.0
## [7] Biobase_2.50.0 GenomicRanges_1.42.0
## [9] GenomeInfoDb_1.26.0 IRanges_2.24.0
## [11] S4Vectors_0.28.0 BiocGenerics_0.36.0
## [13] MatrixGenerics_1.2.0 matrixStats_0.57.0
## [15] BiocStyle_2.18.0
##
## loaded via a namespace (and not attached):
## [1] viridis_0.5.1 BiocSingular_1.6.0
## [3] viridisLite_0.3.0 foreach_1.5.1
## [5] DelayedMatrixStats_1.12.0 scuttle_1.0.0
## [7] BiocManager_1.30.10 doRNG_1.8.2
## [9] GenomeInfoDbData_1.2.4 vipor_0.4.5
## [11] yaml_2.2.1 pillar_1.4.6
## [13] lattice_0.20-41 glue_1.4.2
## [15] limma_3.46.0 beachmat_2.6.0
## [17] digest_0.6.27 XVector_0.30.0
## [19] colorspace_1.4-1 plyr_1.8.6
## [21] cowplot_1.1.0 htmltools_0.5.0
## [23] Matrix_1.2-18 pkgconfig_2.0.3
## [25] magick_2.5.0 bookdown_0.21
## [27] zlibbioc_1.36.0 purrr_0.3.4
## [29] scales_1.1.1 BiocParallel_1.24.0
## [31] tibble_3.0.4 generics_0.0.2
## [33] farver_2.0.3 ellipsis_0.3.1
## [35] withr_2.3.0 magrittr_1.5
## [37] crayon_1.3.4 evaluate_0.14
## [39] doParallel_1.0.16 beeswarm_0.2.3
## [41] tools_4.0.3 lifecycle_0.2.0
## [43] stringr_1.4.0 munsell_0.5.0
## [45] rngtools_1.5 DelayedArray_0.16.0
## [47] irlba_2.3.3 compiler_4.0.3
## [49] rsvd_1.0.3 rlang_0.4.8
## [51] grid_4.0.3 RCurl_1.98-1.2
## [53] iterators_1.0.13 BiocNeighbors_1.8.0
## [55] bitops_1.0-6 labeling_0.4.2
## [57] rmarkdown_2.5 gtable_0.3.0
## [59] codetools_0.2-16 R6_2.4.1
## [61] gridExtra_2.3 knitr_1.30
## [63] dplyr_1.0.2 stringi_1.5.3
## [65] ggbeeswarm_0.6.0 Rcpp_1.0.5
## [67] vctrs_0.3.4 tidyselect_1.1.0
## [69] xfun_0.18 sparseMatrixStats_1.2.0