Contents

1 Introduction

Harman {noun}
A threshing yard where wheat is separated from chaff
Origin: Turkish and Persian

The harman package is used to remove unwanted batch (technical) effects from datasets. It was designed for microarray and deep sequencing data, but it is applicable to any high-dimensional data where the experimental variable of interest is not completely confounded with the batch variable. Harman uses a PCA and constrained optimisation based technique. This vignette is a tutorial for using Harman in a number of common scenarios and also provides insight on how to interpret results.

For help with Harman, use the package help system. A good place to start is typing ?harman in the console. Harman requires three inputs: 1. datamatrix, a matrix of type numeric or integer, or a data.frame that can be coerced into such using as.matrix(), 2. expt, a vector or factor containing the experimental grouping variable, 3. batch, a vector or factor containing the batch grouping variable.

The matrix is to be constructed with features (typically microarray probes or sequencing counts) in rows and samples in columns, much like the assayData slot in the canonical Bioconductor eSet object, or any object which inherits from it. The data should have normalisation and any other global adjustment for noise reduction (such as background correction) applied prior to using Harman.

The fourth parameter of interest in Harman is limit, which sets the confidence limit for batch effect removal. The default is limit=0.95. We can consider the confidence limit an inverse of the alpha level, so there is 1 - limit chance (default of 0.05, or 5%) that some of the variance from the experimental variable is being removed along with the batch variance. This user specified limit parameter allows one to tune the aggressiveness of the batch effect removal. The more samples in each batch, the more opportunity Harman has to model the batch distributions, which allows a more precise identification (and subsequent removal) of batch effects.

The Harman package is available from Bioconductor (Harman) or Github (Harman).

2 Transcriptome data examples

2.1 Working with a simple transciptome microarray dataset

First off, let’s load an example dataset from HarmanData where the batches and experimental variable are balanced.

library(Harman)
library(HarmanData)
data(OLF)

The olfactory stem cell study is an experiment to gauge the response of human olfactory neurosphere-derived (hONS) cells established from adult donors to ZnO nanoparticles. A total of 28 Affymetrix HuGene 1.0 ST arrays were normalised together using RMA.

The data comprises six treatment groups plus a control group, each consisting of four replicates:

table(olf.info)
##          Batch
## Treatment 1 2 3 4
##         1 1 1 1 1
##         2 1 1 1 1
##         3 1 1 1 1
##         4 1 1 1 1
##         5 1 1 1 1
##         6 1 1 1 1
##         7 1 1 1 1

The olf.info data.frame has the expt and batch variables across 2 columns, with each sample described in one row to give 28 rows.

olf.info[1:7,]
##    Treatment Batch
## c1         1     1
## c2         2     1
## c3         3     1
## c4         4     1
## c5         5     1
## c6         6     1
## c7         7     1

The data is a data.frame of normalised log2 expression values with dimensions: 33297 rows (features) x 28 columns (samples). This data can be handed to Harman as is, or first coerced into a matrix.

head(olf.data)
##         c1      c2      c3      c4      c5      c6      c7      c8      c9
## p1 5.05866 4.58076 5.58438 2.90481 5.39752 4.24041 2.46891 5.34241 2.86128
## p2 4.23886 4.08143 3.21386 3.53045 4.18741 3.70027 3.05552 4.62957 4.09687
## p3 3.66121 2.79664 4.13699 2.86271 3.17795 2.92988 3.05603 3.42135 2.70507
## p4 8.61399 9.09654 9.16841 9.10928 8.94949 8.70754 8.75558 9.31429 8.63934
## p5 2.84004 2.66609 3.03612 3.26561 3.22945 3.32247 3.05079 3.02775 3.18419
## p6 3.12234 3.05058 3.85761 3.07707 3.67759 3.72965 3.43910 3.15980 2.40544
##        c10     c11     c12     c13     c14     c15     c16     c17     c18
## p1 3.03601 4.16908 2.58603 3.14912 2.80076 5.84228 4.51905 3.63710 5.40139
## p2 3.59235 3.61548 3.87856 3.28656 4.12426 4.75150 4.44983 4.59084 4.87332
## p3 3.02844 3.11758 2.78865 3.82057 2.98588 4.34385 3.04461 3.47405 2.96032
## p4 8.67534 8.68344 9.06311 8.57974 9.01710 8.80506 8.82719 9.17436 8.72230
## p5 3.39400 3.27891 2.20645 3.26020 3.10178 3.72065 3.11529 3.75199 3.43958
## p6 3.33047 2.81670 3.34086 2.61524 2.38151 3.06240 4.51134 3.69132 3.08967
##        c19     c20     c21     c22     c23     c24     c25     c26     c27
## p1 4.61271 5.07018 5.11652 3.11507 3.63363 4.00769 4.57562 4.34872 4.81612
## p2 4.24876 4.43532 5.59789 2.64399 3.54669 3.26678 3.31107 4.03487 3.60095
## p3 3.31022 2.89191 3.84660 3.24867 2.56718 2.99377 3.18528 2.99099 3.14193
## p4 9.14509 9.27561 9.17592 8.79834 8.92382 9.42164 9.07371 8.91382 8.76901
## p5 3.41088 3.42294 3.77549 3.47989 2.79997 2.41906 2.64609 3.14506 3.39344
## p6 5.20479 4.35899 3.80101 2.95787 2.82707 2.76646 2.89902 3.28622 4.27340
##        c28
## p1 2.64101
## p2 4.10095
## p3 2.74735
## p4 8.30663
## p5 3.82901
## p6 3.21685

2.1.1 Running Harman

Okay, so let’s run Harman.

olf.harman <- harman(olf.data, expt=olf.info$Treatment, batch=olf.info$Batch, limit=0.95)

This creates a harmanresults S3 object which has a number of slots. These include the centre and rotation slots of a prcomp object which is returned after calling prcomp(t(x)), where x is the datamatrix supplied. These two slots are required for reconstructing the data later. The other slots are the factors supplied for the analysis (specified as expt and batch), the runtime parameters and some summary stats for Harman. Finally, there are the original and corrected PC scores.

str(olf.harman)
## List of 7
##  $ factors   :'data.frame':  28 obs. of  4 variables:
##   ..$ expt         : Factor w/ 7 levels "1","2","3","4",..: 1 2 3 4 5 6 7 1 2 3 ...
##   ..$ batch        : Factor w/ 4 levels "1","2","3","4": 1 1 1 1 1 1 1 2 2 2 ...
##   ..$ expt.numeric : int [1:28] 1 2 3 4 5 6 7 1 2 3 ...
##   ..$ batch.numeric: int [1:28] 1 1 1 1 1 1 1 2 2 2 ...
##  $ parameters:List of 4
##   ..$ limit     : num 0.95
##   ..$ numrepeats: int 100000
##   ..$ randseed  : num 0
##   ..$ forceRand : logi FALSE
##  $ stats     :'data.frame':  28 obs. of  3 variables:
##   ..$ dimension : Factor w/ 28 levels "PC1","PC10","PC11",..: 1 12 22 23 24 25 26 27 28 2 ...
##   ..$ confidence: num [1:28] 0.95 0.949 0.95 0.95 0.951 ...
##   ..$ correction: num [1:28] 0.25 0.33 0.5 0.9 0.44 0.85 0.74 1 1 1 ...
##  $ center    : Named num [1:33297] 4.13 3.95 3.19 8.92 3.19 ...
##   ..- attr(*, "names")= chr [1:33297] "p1" "p2" "p3" "p4" ...
##  $ rotation  : num [1:33297, 1:28] -0.020637 -0.011028 -0.006488 -0.000785 -0.00551 ...
##   ..- attr(*, "dimnames")=List of 2
##   .. ..$ : chr [1:33297] "p1" "p2" "p3" "p4" ...
##   .. ..$ : chr [1:28] "PC1" "PC2" "PC3" "PC4" ...
##  $ original  : num [1:28, 1:28] -26.72 3.79 -19.76 25.66 -3.14 ...
##   ..- attr(*, "dimnames")=List of 2
##   .. ..$ : chr [1:28] "c1" "c2" "c3" "c4" ...
##   .. ..$ : chr [1:28] "PC1" "PC2" "PC3" "PC4" ...
##  $ corrected : num [1:28, 1:28] -27.17 3.34 -20.21 25.21 -3.59 ...
##   ..- attr(*, "dimnames")=List of 2
##   .. ..$ : chr [1:28] "c1" "c2" "c3" "c4" ...
##   .. ..$ : chr [1:28] "PC1" "PC2" "PC3" "PC4" ...
##  - attr(*, "class")= chr "harmanresults"

2.1.2 Inspecting results

Harman objects can be inspected with methods such as pcaPlot and arrowPlot, as well as the generic functions plot and summary.

plot(olf.harman)

arrowPlot(olf.harman, main='Arrowplot of correction')

Using summary or inspecting the stats slot we can see Harman corrected the first 7 PCs and left the rest uncorrected.

summary(olf.harman)
## Total factor levels:
## 
##  expt batch 
##     7     4 
## 
## Experiment x Batch Design:
## 
##     batch
## expt 1 2 3 4
##    1 1 1 1 1
##    2 1 1 1 1
##    3 1 1 1 1
##    4 1 1 1 1
##    5 1 1 1 1
##    6 1 1 1 1
##    7 1 1 1 1
## 
## Simulation parameters:
## 100000 simulations (with seed of 0). ForceRand is FALSE.
## 
## Harman results with confidence limit of 0.95:
##  PC1  PC2  PC3  PC4  PC5  PC6  PC7  PC8  PC9 PC10 PC11 PC12 PC13 PC14 PC15 
## 0.25 0.33 0.50 0.90 0.44 0.85 0.74 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 
## PC16 PC17 PC18 PC19 PC20 PC21 PC22 PC23 PC24 PC25 PC26 PC27 PC28 
## 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 
## 
## Top batch-effected PCs:
##  PC1  PC2  PC5  PC3  PC7 
## 0.25 0.33 0.44 0.50 0.74
dimension confidence correction
PC1 0.9500996 0.25
PC2 0.9490076 0.33
PC3 0.9500139 0.50
PC4 0.9497873 0.90
PC5 0.9509498 0.44
PC6 0.9505247 0.85
PC7 0.9507247 0.74
PC8 0.8353300 1.00
PC9 0.8897871 1.00
PC10 0.7478036 1.00
PC11 0.7534338 1.00
PC12 0.6490559 1.00
PC13 0.8538693 1.00
PC14 0.5361958 1.00
PC15 0.7655424 1.00
PC16 0.4155103 1.00
PC17 0.6931610 1.00
PC18 0.7644623 1.00
PC19 0.2869585 1.00
PC20 0.1424034 1.00
PC21 0.8732809 1.00
PC22 0.8205077 1.00
PC23 0.8612620 1.00
PC24 0.9488360 1.00
PC25 0.5062507 1.00
PC26 0.5842571 1.00
PC27 0.9466016 1.00
PC28 0.9111912 1.00

As the confidence (limit) was 0.95, Harman will look for batch effects until this limit is met. It does this by reducing the batch means in an iterative way using a binary search algorithm until the chance that biological variance is being removed (the factor given in expt) is too high. Consider the values specified in the confidence column as the likelihood that separation of samples in this PC is due to batch alone and not due to the experimental variable. If this confidence value is less than limit, Harman will not make another iterative correction. For example, on PC8 the confidence is about 0.835 which is below the limit of 0.95, so Harman did not alter data on this PC. Let’s check this on a plot.

arrowPlot(olf.harman, 1, 8)

The horizontal arrows show us that, on PC1 the scores were shifted, but on PC8 they were not.

If both dimensions were not shifted, the arrowPlot will default to printing x instead of arrows (can’t have 0 length arrows!)

arrowPlot(olf.harman, 8, 9)

We can also easily colour the PCA plot by the experimental variable to compare:

par(mfrow=c(1,2))
pcaPlot(olf.harman, colBy='batch', pchBy='expt', main='Col by Batch')
pcaPlot(olf.harman, colBy='expt', pchBy='batch', main='Col by Expt')

2.1.3 Reconstruct the corrected data

So, if corrections have been made and we’re happy with the value of limit, then we reconstruct corrected data from the Harman adjusted PC scores. To do this, a harmanresults object is handed to the function reconstructData(). This function produces a matrix of the same dimensions as the input matrix filled with corrected data.

olf.data.corrected <- reconstructData(olf.harman)

This new data can be over-written into something like an ExpressionSet object with a command like exprs(eset) <- data.corrected. An example of this is below.

To convince you that Harman is working as it should in reconstructing the data back from the PCA domain, let’s test this principle on the original data.

olf.data.remade <- reconstructData(olf.harman, this='original')
all.equal(as.matrix(olf.data), olf.data.remade)
## [1] TRUE

So, the data is indeed the same (to within the machine epsilon limit for floating point error)!

2.1.4 How does the new data differ from the old data?

Let’s try graphically plotting the differences using image(). First, the rows (assays) are ordered by the variation in the difference between the original and corrected data.

olf.data.diff <- abs(as.matrix(olf.data) - olf.data.corrected)

diff_rowvar <- apply(olf.data.diff, 1, var)
by_rowvar <- order(diff_rowvar)

par(mfrow=c(1,1))
image(x=1:ncol(olf.data.diff),
      y=1:nrow(olf.data.diff),
      z=t(olf.data.diff[by_rowvar, ]),
      xlab='Sample',
      ylab='Probeset',
      main='Harman probe adjustments (ordered by variance)',
      cex.main=0.7,
      col=brewer.pal(9, 'Reds'))

We can see that most Harman adjusted probes were from batch 3 (samples 15 to 21), while batch 1 is relatively unchanged. In batches 2 and 3, often the same probes were adjusted to a larger extent in batch 3. This suggests some probes on this array design are prone to a batch effect.

2.2 Another simple transciptome dataset

The IMR90 Human lung fibroblast cell line data that was published in a paper by Johnson et al doi: 10.1093/biostatistics/kxj037 comes with Harman as an example dataset.

require(Harman)
require(HarmanData)
data(IMR90)

The data is structured like so:

Treatment Batch
_23_1CON 1 1
_23_2CON 2 1
_23_3NO0 3 1
_23_4NO7 4 1
_26_1CON 1 2
_26_2CON 2 2
_26_3NO0 3 2
_26_4NO7 4 2
CONTROLZ 1 3
CONTROL7 2 3
NO_ZERO 3 3
NO_7_5 4 3

It can be seen from the below table the experimental structure is completely balanced.

table(expt=imr90.info$Treatment, batch=imr90.info$Batch)
##     batch
## expt 1 2 3
##    1 1 1 1
##    2 1 1 1
##    3 1 1 1
##    4 1 1 1

2.2.1 Evidence of batch effects

While there isn’t glaring batch effects in PC1 and PC2, they are more apparent when plotting PC1 and PC3.

par(mfrow=c(1,2), mar=c(4, 4, 4, 2) + 0.1)
imr90.pca <- prcomp(t(imr90.data), scale. = TRUE)
prcompPlot(imr90.pca, pc_x=1, pc_y=2, colFactor=imr90.info$Batch,
           pchFactor=imr90.info$Treatment, main='IMR90, PC1 v PC2')
prcompPlot(imr90.pca, pc_x=1, pc_y=3, colFactor=imr90.info$Batch,
           pchFactor=imr90.info$Treatment, main='IMR90, PC1 v PC3')

2.2.2 Running Harman

imr90.hm <- harman(as.matrix(imr90.data), expt=imr90.info$Treatment,
                   batch=imr90.info$Batch)

We can see the most batch correction was actually on the 3rd principal component and the data was also corrected on the 1st and 4th component.

dimension confidence correction
PC1 0.9498640 0.76
PC2 0.9247775 1.00
PC3 0.9503938 0.35
PC4 0.9502018 0.69
PC5 0.6654655 1.00
PC6 0.2424223 1.00
PC7 0.2775396 1.00
PC8 0.7810260 1.00
PC9 0.1267338 1.00
PC10 0.3193122 1.00
PC11 0.1313642 1.00
PC12 0.5495756 1.00

Plotting PC1 v. PC2 and PC1 v. PC3…

plot(imr90.hm, pc_x=1, pc_y=2)

plot(imr90.hm, pc_x=1, pc_y=3)

While no batch effect was found on PC2, there are batch effects on PC1, 3 and 4. An arrowPlot() shows the extent of the correction:

arrowPlot(imr90.hm, pc_x=1, pc_y=3)

On PC1 the data has been shifted only a little, while on PC3 a large batch-effect signature seems to be present. The corrected data on the PC1 v. PC3 plot is still a little separated by batch. If we wish to aggressively stomp on the batch effect, (with increased risk of removing some experimental variance), we may specify something like limit=0.9.

imr90.hm <- harman(as.matrix(imr90.data), expt=imr90.info$Treatment,
                   batch=imr90.info$Batch, limit=0.9)
plot(imr90.hm, pc_x=1, pc_y=3)

This time the samples across batches are less separated on the plot and there is also a batch effect found on PC2.

dimension confidence correction
PC1 0.8990548 0.54
PC2 0.9006838 0.86
PC3 0.8990320 0.25
PC4 0.8985044 0.49
PC5 0.6654655 1.00
PC6 0.2424223 1.00
PC7 0.2775396 1.00
PC8 0.7810260 1.00
PC9 0.1267338 1.00
PC10 0.3193122 1.00
PC11 0.1313642 1.00
PC12 0.5495756 1.00

2.2.3 Reconstruct the corrected data

Again, as before we reconstuct the data. Let’s also use this data to do a comparison: a PCA plot of the original data and shiny new reconstructed data.

imr90.data.corrected <- reconstructData(imr90.hm)
par(mfrow=c(1,2))
prcompPlot(imr90.data, 1, 3, colFactor=imr90.hm$factors$batch, cex=1.5, main='PCA, Original')
prcompPlot(imr90.data.corrected, 1, 3, colFactor=imr90.hm$factors$batch, cex=1.5, main='PCA, Corrected')

2.3 Working with very small datasets

This example is an illustration of how Harman will have reduced power in teasing apart biological and technical variance when presented with a very small dataset (2 replicates and 2 conditions).

To illustrate, we use the toy dataset in affydata. The Dilution data within relates to two sources of cRNA, A (human liver tissue) and B (Central Nervous System cell line), which have been hybridized to human array (HGU95A) in a range of proportions and dilutions.

This toy example is taken from arrays hybridized to source A at 10 μg and 20 μg. There are two replicate arrays for each generated cRNA, with each array replicate processed in a different scanner. For more information see Gautier et al., affy - Analysis of Affymetrix GeneChip data at the probe level.

library(affydata, quietly = TRUE, warn.conflicts = FALSE)
FALSE      Package    LibPath                                  Item      
FALSE [1,] "affydata" "/home/biocbuild/bbs-3.7-bioc/R/library" "Dilution"
FALSE      Title                        
FALSE [1,] "AffyBatch instance Dilution"
data(Dilution)
Dilution.log <- Dilution
intensity(Dilution.log) <- log(intensity(Dilution))
cols <- brewer.pal(nrow(pData(Dilution)), 'Paired')

This dataset contains technical replicates of liver RNA run on two different scanners. Technical replicates are denoted as A and B samples. There are two technical replicates across two array scanners. The 10 and 20 The second 2 are also replicates. The second arrays are hybridized to twice as much RNA so the intensities should be, in general, bigger.

liver sn19 scanner
20A 20 0 1
20B 20 0 2
10A 10 0 1
10B 10 0 2
boxplot(Dilution, col=cols)
## Warning: replacing previous import 'AnnotationDbi::tail' by 'utils::tail'
## when loading 'hgu95av2cdf'
## Warning: replacing previous import 'AnnotationDbi::head' by 'utils::head'
## when loading 'hgu95av2cdf'
## 

Notice that the scanner effect (A vs B) is stronger than the RNA concentration effect (10 vs 20). This certainly hints at a batch effect.

Let’s normalize the data by two methods (Loess and Quantile) and see if it removes this technical noise.

Dilution.loess <- normalize(Dilution.log, method="loess")
## Done with 1 vs 2 in iteration 1 
## Done with 1 vs 3 in iteration 1 
## Done with 1 vs 4 in iteration 1 
## Done with 2 vs 3 in iteration 1 
## Done with 2 vs 4 in iteration 1 
## Done with 3 vs 4 in iteration 1 
## 1 0.01037134
Dilution.qnt <- normalize(Dilution.log, method="quantiles")

# define a quick PCA and plot function
pca <- function(exprs, pc_x=1, pc_y=2, cols, ...) {
  pca <- prcomp(t(exprs), retx=TRUE, center=TRUE)
  if(is.factor(cols)) {
    factor_names <- levels(cols)
    num_levels <- length(factor_names)
    palette <- rainbow(num_levels)
    mycols <- palette[cols]  
  } else {
    mycols <- cols
  }
  plot(pca$x[, pc_x], pca$x[, pc_y],
       xlab=paste('PC', pc_x, sep=''),
       ylab=paste('PC', pc_y, sep=''),
       col=mycols, ...)
  if(is.factor(cols)) {
    legend(x=min(pca$x[, pc_x]), y=max(pca$x[, pc_y]),
           legend=factor_names, fill=palette, cex=0.5)
  }
}

par(mfrow=c(1,2), mar=c(4, 4, 4, 2) + 0.1)
boxplot(Dilution.loess, col=cols, main='Loess')
boxplot(Dilution.qnt, col=cols, main='Quantile')

pca(exprs(Dilution.loess), cols=cols, cex=1.5, pch=16, main='PCA Loess')
pca(exprs(Dilution.qnt), cols=cols, cex=1.5, pch=16, main='PCA Quantile')

The boxplots give the impression the batch effect has been removed. However, principal component analysis (PCA) shows the batch effect to still be the largest source of variance in the data. PC1 is dominated by batch effect (seperation of bold and pastel colours), while on PC2 the effect of RNA quantity is observed, so green (10 μg) compared with blue (20 μg).

2.3.1 Running Harman

Let’s fire up harman and try to remove this batch effect.

library(Harman)
loess.hm <- harman(exprs(Dilution.loess),
                   expt=pData(Dilution.loess)$liver,
                   batch=pData(Dilution.loess)$scanner)
qnt.hm <- harman(exprs(Dilution.qnt),
                 expt=pData(Dilution.qnt)$liver,
                 batch=pData(Dilution.qnt)$scanner)

If we inspect the stats on the Harman runs,

Loess-normalised data

dimension confidence correction
PC1 0.7743943 1
PC2 0.2595400 1
PC3 0.1334285 1
PC4 0.7699535 1

Quantile-normalised data

dimension confidence correction
PC1 0.7784752 1
PC2 0.0199157 1
PC3 0.0628038 1
PC4 0.5407458 1

The correction statistic is 1.0 for all dimensions, so Harman didn’t find any batch effect!

2.3.2 More aggressive settings

While our intuition tells us there is a batch effect, with the default settings (limit=0.95), harman fails to find one. This is due to the fact there are only two replicates in each batch! Let’s step up the limit now, to a confidence interval of 0.75. So, we are 75% sure only technical (batch) variation and not biological variation is being removed.

loess.hm <- harman(exprs(Dilution.loess),
                   expt=pData(Dilution.loess)$liver,
                   batch=pData(Dilution.loess)$scanner,
                   limit=0.75)
qnt.hm <- harman(exprs(Dilution.qnt),
                 expt=pData(Dilution.qnt)$liver,
                 batch=pData(Dilution.qnt)$scanner,
                 limit=0.75)

This time a batch effect is found on PC1.

Loess-normalised data

dimension confidence correction
PC1 0.7495339 0.40
PC2 0.2595400 1.00
PC3 0.1334285 1.00
PC4 0.7504076 0.86

Quantile-normalised data

dimension confidence correction
PC1 0.7491598 0.17
PC2 0.0199157 1.00
PC3 0.0628038 1.00
PC4 0.5407458 1.00

2.3.3 Harman plots

So what corrections did Harman make with limit=0.75? Let’s take a look…

par(mfrow=c(2,2), mar=c(4, 4, 4, 2) + 0.1)
plot(loess.hm, 1, 2, pch=17, col=cols)

plot(qnt.hm, 1, 2, pch=17, col=cols)

2.3.4 Reconstruct the corrected data

Dilution.loess.hm <- Dilution.loess
Dilution.qnt.hm <- Dilution.qnt
exprs(Dilution.loess.hm) <- reconstructData(loess.hm)
exprs(Dilution.qnt.hm) <- reconstructData(qnt.hm)
detach('package:affydata')

3 Working with unbalanced and confounded data

3.1 Example dataset

The dataset (bladderbatch) for this exercise is that discussed by Jeff Leek and others here and arises from this paper. This was a bladder cancer study comparing Affymetrix HG-U133A microarray expression profiles across five groups: superficial transitional cell carcinoma (sTCC) with surrounding carcinoma in situ (CIS) lesions (sTCC+CIS) or without surrounding CIS lesions (sTCC-CIS), muscle invasive carcinomas (mTCC) with normal bladder mucosa from patients without a bladder cancer history (Normal) and biopsies from cystectomy specimens (Biopsy). The arrays were run on 5 different days (5 batches).

First, loading the data:

library(bladderbatch)
library(Harman)
# This loads an ExpressionSet object called bladderEset
data(bladderdata)
bladderEset
## ExpressionSet (storageMode: lockedEnvironment)
## assayData: 22283 features, 57 samples 
##   element names: exprs, se.exprs 
## protocolData: none
## phenoData
##   sampleNames: GSM71019.CEL GSM71020.CEL ... GSM71077.CEL (57 total)
##   varLabels: sample outcome batch cancer
##   varMetadata: labelDescription
## featureData: none
## experimentData: use 'experimentData(object)'
## Annotation: hgu133a

The phenotype data.

sample outcome batch cancer
GSM71019.CEL 1 Normal 3 Normal
GSM71020.CEL 2 Normal 2 Normal
GSM71021.CEL 3 Normal 2 Normal
GSM71022.CEL 4 Normal 3 Normal
GSM71023.CEL 5 Normal 3 Normal
GSM71024.CEL 6 Normal 3 Normal
GSM71025.CEL 7 Normal 2 Normal
GSM71026.CEL 8 Normal 2 Normal
GSM71028.CEL 9 sTCC+CIS 5 Cancer
GSM71029.CEL 10 sTCC-CIS 2 Cancer
GSM71030.CEL 11 sTCC-CIS 5 Cancer
GSM71031.CEL 12 sTCC-CIS 2 Cancer
GSM71032.CEL 13 sTCC+CIS 5 Cancer
GSM71033.CEL 14 sTCC-CIS 2 Cancer
GSM71034.CEL 15 sTCC+CIS 5 Cancer
GSM71035.CEL 16 sTCC+CIS 5 Cancer
GSM71036.CEL 17 sTCC-CIS 2 Cancer
GSM71037.CEL 18 mTCC 1 Cancer
GSM71038.CEL 19 sTCC+CIS 5 Cancer
GSM71039.CEL 20 mTCC 1 Cancer
GSM71040.CEL 21 mTCC 2 Cancer
GSM71041.CEL 22 mTCC 1 Cancer
GSM71042.CEL 23 sTCC-CIS 2 Cancer
GSM71043.CEL 24 sTCC+CIS 5 Cancer
GSM71044.CEL 25 sTCC-CIS 2 Cancer
GSM71045.CEL 26 sTCC-CIS 2 Cancer
GSM71046.CEL 27 sTCC+CIS 5 Cancer
GSM71047.CEL 28 mTCC 1 Cancer
GSM71048.CEL 29 mTCC 1 Cancer
GSM71049.CEL 30 sTCC-CIS 2 Cancer
GSM71050.CEL 31 mTCC 1 Cancer
GSM71051.CEL 32 mTCC 1 Cancer
GSM71052.CEL 33 mTCC 1 Cancer
GSM71053.CEL 34 sTCC+CIS 5 Cancer
GSM71054.CEL 35 mTCC 1 Cancer
GSM71055.CEL 36 sTCC-CIS 2 Cancer
GSM71056.CEL 37 sTCC-CIS 2 Cancer
GSM71058.CEL 38 sTCC-CIS 2 Cancer
GSM71059.CEL 39 sTCC-CIS 2 Cancer
GSM71060.CEL 40 mTCC 1 Cancer
GSM71061.CEL 41 sTCC+CIS 5 Cancer
GSM71062.CEL 42 sTCC+CIS 5 Cancer
GSM71063.CEL 43 sTCC+CIS 5 Cancer
GSM71064.CEL 44 sTCC-CIS 2 Cancer
GSM71065.CEL 45 sTCC-CIS 5 Cancer
GSM71066.CEL 46 mTCC 1 Cancer
GSM71067.CEL 47 sTCC-CIS 5 Cancer
GSM71068.CEL 48 sTCC+CIS 5 Cancer
GSM71069.CEL 49 Biopsy 4 Biopsy
GSM71070.CEL 50 Biopsy 4 Biopsy
GSM71071.CEL 51 Biopsy 5 Biopsy
GSM71072.CEL 52 Biopsy 5 Biopsy
GSM71073.CEL 53 Biopsy 5 Biopsy
GSM71074.CEL 54 Biopsy 5 Biopsy
GSM71075.CEL 55 Biopsy 4 Biopsy
GSM71076.CEL 56 Biopsy 4 Biopsy
GSM71077.CEL 57 Biopsy 4 Biopsy

A table of batch by outcome.

table(batch=pData(bladderEset)$batch, expt=pData(bladderEset)$outcome)
##      expt
## batch Biopsy mTCC Normal sTCC-CIS sTCC+CIS
##     1      0   11      0        0        0
##     2      0    1      4       13        0
##     3      0    0      4        0        0
##     4      5    0      0        0        0
##     5      4    0      0        3       12

3.1.1 Batch structure

The experimental design is very poor in controlling for a batch effect. Ideally, the five factors should be distributed across the five run dates (batches). Instead, four out of the five experimental factors are distributed across two batches. The sTCC+CIS samples are all within batch 5. In this instance, batch is completely confounded with the experimental variable, so any variation in the data will be a sum of the biological variance and technical variance. Any inference about the difference of sTCC+CIS to other groups needs to be made very guardedly. It is also worth noting the spread of the mTCC samples across batches is suboptimal. While there are 11 samples in batch 1, there is only a single sample in batch 2. Finally, batches 3 and 4 have only one sample type.

Let’s explore the multivariate grouping of the data by generating some PCA plots, first with colouring by batch and then by experimental variable.

par(mfrow=c(1,2))
prcompPlot(exprs(bladderEset), colFactor=pData(bladderEset)$batch,
    pchFactor=pData(bladderEset)$outcome, main='Col by Batch')
prcompPlot(exprs(bladderEset), colFactor=pData(bladderEset)$outcome,
    pchFactor=pData(bladderEset)$batch, main='Col by Expt')

The batch structures are highly unbalanced and so a batch effect is not immediately obvious to casual observation. However, a closer examination of samples that are represented well across two batches (Biopsy and Normal), shows a batch effect is certainly present. Certainly, with an older microarray technology like the Affymetrix HG-U133A, batch effects will be present.

3.1.2 Running Harman

Even though the batch structures are highly unbalanced, this dataset is quite large - so, we expect Harman to be well powered to find batch effects. Let’s take a look.

expt <- pData(bladderEset)$outcome
batch <- pData(bladderEset)$batch
bladder_harman <- harman(exprs(bladderEset), expt=expt, batch=batch)
sum(bladder_harman$stats$correction < 1)
## [1] 46

Harman found 46 of the 57 PCs had a batch effect.

summary(bladder_harman)
## Total factor levels:
## 
##  expt batch 
##     5     5 
## 
## Experiment x Batch Design:
## 
##           batch
## expt        1  2  3  4  5
##   Biopsy    0  0  0  5  4
##   mTCC     11  1  0  0  0
##   Normal    0  4  4  0  0
##   sTCC-CIS  0 13  0  0  3
##   sTCC+CIS  0  0  0  0 12
## 
## Simulation parameters:
## 100000 simulations (with seed of 0). ForceRand is FALSE.
## 
## Harman results with confidence limit of 0.95:
##  PC1  PC2  PC3  PC4  PC5  PC6  PC7  PC8  PC9 PC10 PC11 PC12 PC13 PC14 PC15 
## 0.00 0.56 0.07 0.11 0.27 0.56 0.38 0.10 0.22 0.25 0.25 0.42 0.61 0.28 0.36 
## PC16 PC17 PC18 PC19 PC20 PC21 PC22 PC23 PC24 PC25 PC26 PC27 PC28 PC29 PC30 
## 0.46 0.24 1.00 0.63 0.15 0.24 0.51 0.70 0.41 0.35 0.60 0.44 0.37 0.81 0.38 
## PC31 PC32 PC33 PC34 PC35 PC36 PC37 PC38 PC39 PC40 PC41 PC42 PC43 PC44 PC45 
## 0.33 0.32 0.47 0.53 0.25 0.46 0.60 1.00 0.34 0.88 1.00 1.00 1.00 0.81 1.00 
## PC46 PC47 PC48 PC49 PC50 PC51 PC52 PC53 PC54 PC55 PC56 PC57 
## 0.48 1.00 0.75 1.00 0.72 0.89 1.00 0.97 0.94 1.00 1.00 0.03 
## 
## Top batch-effected PCs:
##  PC1 PC57  PC3  PC8  PC4 
## 0.00 0.03 0.07 0.10 0.11

The summary() shows PC3 to be highly affected by batch. Now plotting the original and corrected data.

par(mfrow=c(1,1))
plot(bladder_harman)

This time for PCs 1 and 3.

plot(bladder_harman, 1, 3)

Now the PC scores changes displayed on an arrowPlot.

arrowPlot(bladder_harman, 1, 3)

3.1.3 Reconstruct the corrected data

First create a new object and then fill the exprs slot of the ExpressionSet object with Harman corrected data. Alternatively, the existing object can have the exprs slot overwritten.

CorrectedBladderEset <- bladderEset
exprs(CorrectedBladderEset) <- reconstructData(bladder_harman)
comment(bladderEset) <- 'Original'
comment(CorrectedBladderEset) <- 'Corrected'

3.2 Limma analysis

Let’s check the effects of Harman with a limma analysis. First fitting the original data:

library(limma, quietly=TRUE)
design <- model.matrix(~0 + expt)
colnames(design) <- c("Biopsy", "mTCC", "Normal", "sTCC", "sTCCwCIS")
contrast_matrix <- makeContrasts(sTCCwCIS - sTCC, sTCCwCIS - Normal,
                                 Biopsy - Normal,
                                 levels=design)

fit <- lmFit(exprs(bladderEset), design)
fit2 <- contrasts.fit(fit, contrast_matrix)
fit2 <- eBayes(fit2)
summary(classifyTestsT(fit2))
##    sTCCwCIS - sTCC sTCCwCIS - Normal Biopsy - Normal
## -1            4284              6404             795
## 0            16155             12342           21076
## 1             1844              3537             412

Now a linear model on the Harman corrected data:

fit_hm <- lmFit(exprs(CorrectedBladderEset), design)
fit2_hm <- contrasts.fit(fit_hm, contrast_matrix)
fit2_hm <- eBayes(fit2_hm)
summary(classifyTestsT(fit2_hm))
##    sTCCwCIS - sTCC sTCCwCIS - Normal Biopsy - Normal
## -1              17               629               1
## 0            22258             21515           22245
## 1                8               139              37

We can see the dramatic effect Harman has had in reducing the number of significant microarray probes. The huge reduction in the Biopsy - Normal contrast makes biological sense, about half of the biopsies were from cystectomies that were histologically normal. The Harman corrected data on the sTCCwCIS - sTCC contrast suggests that surrounding in situ lesions (CIS) does not overly impact the transcriptome of superficial transitional cell carcinoma (sTCC).

4 Methylation data example

4.1 Example dataset

As an example, let’s consider the Illumina Infinium HumanMethylation450 BeadChip data (450k array). First up, an important tip, put M-values into Harman, not Beta-values. Harman is designed for continuous ordinal data, not data which is constrained, such as Beta-values; which by definition are between 0 and 1. Input M-values into Harman and if Beta-values are needed downstream, convert the corrected M-values back into Beta-values using something like the m2beta() function in the lumi package, or the ilogit2() function in minfi.

M-values also have the property of having far more centrality than Beta-values. PCA is a parametric technique and so it works best with an underlying Gaussian distribution to the data. While it has been historically shown that PCA works rather well in non-parametric settings, Harman might be expected to be more sensitive if the data is more centred (M-values), rather than bimodal at the extremes (Beta-values).

Beta values of exactly 0 or 1 will translate to minus infinity and infinity, respectively, in M-value space. An M-value is the logit2() of a Beta value and Beta-values are ilogit2 of the M-values. These infinite values will make the internal singular value decomposition (SVD) step of Harman throw an exception. Further, infinite M-values are not commutative. If an M-value of Inf or -Inf is transformed back into a Beta-value it will have the value NaN or 0, respectively. For these reasons we do not recommend a normalisation step which creates Beta-values of exactly 0 or 1.

library(minfi, quietly = TRUE)
logit2
## function (x) 
## log2(x) - log2(1 - x)
## <bytecode: 0x317e0f28>
## <environment: namespace:minfi>
ilogit2
## function (x) 
## 2^x/(1 + 2^x)
## <bytecode: 0x31855ef8>
## <environment: namespace:minfi>
ilogit2(Inf)
## [1] NaN
ilogit2(-Inf)
## [1] 0

A normalisation technique such as preprocessIllumina() in the minfi package will give Beta-values of exactly 0 or 1, while a technique such as preprocessSWAN() does not. Instead it incorporates a small offset, alpha, as suggested by Pan Du et al. If you have a MethySet object, the minfi package now allows a user to specify an offset to the Beta-value as well as a betaThreshold to constrain betas away from 0 or 1.

While we do not recommend use of a normalisation technique that generate exact 0 or 1 Beta-values, sometimes, we realise, only this normalised data is available. For instance, when the data has been downloaded from a public resource, pre-normalised with no raw red and green channel data. For this case, we have supplied the shiftBetas() helper function in Harman to resolve this problem. We shift beta values of exactly 0 or 1 by a very small amount (typically 1 x 10-4) before transformation into M-values. As an example:

betas <- seq(0, 1, by=0.05)
betas
##  [1] 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65
## [15] 0.70 0.75 0.80 0.85 0.90 0.95 1.00
newBetas <- shiftBetas(betas, shiftBy=1e-4)
newBetas
##  [1] 0.0001 0.0500 0.1000 0.1500 0.2000 0.2500 0.3000 0.3500 0.4000 0.4500
## [11] 0.5000 0.5500 0.6000 0.6500 0.7000 0.7500 0.8000 0.8500 0.9000 0.9500
## [21] 0.9999
range(betas)
## [1] 0 1
range(newBetas)
## [1] 0.0001 0.9999
logit2(betas)
##  [1]       -Inf -4.2479275 -3.1699250 -2.5025003 -2.0000000 -1.5849625
##  [7] -1.2223924 -0.8930848 -0.5849625 -0.2895066  0.0000000  0.2895066
## [13]  0.5849625  0.8930848  1.2223924  1.5849625  2.0000000  2.5025003
## [19]  3.1699250  4.2479275        Inf
logit2(newBetas)
##  [1] -13.2875681  -4.2479275  -3.1699250  -2.5025003  -2.0000000  -1.5849625
##  [7]  -1.2223924  -0.8930848  -0.5849625  -0.2895066   0.0000000   0.2895066
## [13]   0.5849625   0.8930848   1.2223924   1.5849625   2.0000000   2.5025003
## [19]   3.1699250   4.2479275  13.2875681

4.1.1 Loading 450K data

So, let’s get underway and analyse the toy dataset supplied with minfi.

library(minfiData, quietly = TRUE)
baseDir <- system.file("extdata", package="minfiData")
targets <- read.metharray.sheet(baseDir)
## [1] "/home/biocbuild/bbs-3.7-bioc/R/library/minfiData/extdata/SampleSheet.csv"

Read in the files, normalise using preprocessSWAN() and preprocessIllumina() and filter out poorly called CpG sites.

rgSet <- read.metharray.exp(targets=targets)
mSetSw <- preprocessSWAN(rgSet)

mSet <- preprocessIllumina(rgSet, bg.correct=TRUE, normalize="controls",
                           reference=2)
detP <- detectionP(rgSet)
keep <- rowSums(detP < 0.01) == ncol(rgSet)
mSetIl <- mSet[keep,]
mSetSw <- mSetSw[keep,]

This dataset has quite a few phenotype variables of interest. The samples are paired cancer-normal samples from three people, 1 male and 2 females.

kable(pData(mSetSw)[,c('Sample_Group', 'person', 'sex', 'status', 'Array',
                       'Slide')])
Sample_Group person sex status Array Slide
5723646052_R02C02 GroupA id3 M normal R02C02 5723646052
5723646052_R04C01 GroupA id2 F normal R04C01 5723646052
5723646052_R05C02 GroupB id3 M cancer R05C02 5723646052
5723646053_R04C02 GroupB id1 F cancer R04C02 5723646053
5723646053_R05C02 GroupA id1 F normal R05C02 5723646053
5723646053_R06C02 GroupB id2 F cancer R06C02 5723646053

Doing some exploratory data analysis using MDS (considering it is methylation data), we can see that status is separated on PC1 and sex on PC2. This makes biological sense as we know cancer and gender both have large effects on DNA methylation. In cancer samples, there is typically global hypomethylation and focal hypermethylation at some CpG islands. While in the case of gender, female and male samples have very different X chromosome methylation due to imprinting, as well as some autosomal CpG site differences.

If the plot is recoloured by “Slide”“, there is some suggestion a batch effect is intermingled with these two experimental variables. The tricky question is how to use Harman to remove the influence of Slide on the data, without also removing variance due to the experimental variables of interest?

par(mfrow=c(1, 1))
cancer_by_gender_factor <- as.factor(paste(pData(mSetSw)$sex,
                                           pData(mSetSw)$status)
                                     )

mdsPlot(mSetSw, sampGroups=cancer_by_gender_factor, pch=16)

mdsPlot(mSetSw, sampGroups=as.factor(pData(mSet)$Slide), pch=16)

The experiment is very small, with only 6 (paired) samples. The MDS plots suggests there are two main phenotypes of influence, status and sex. The batch variable in this case is “Slide”. The sex phenotype variable, which is highly influencing the data, is spread unevenly across the two slides (batches).

table(gender=pData(mSetSw)$sex, slide=pData(mSetSw)$Slide)
##       slide
## gender 5723646052 5723646053
##      F          1          3
##      M          2          0

From the table, we can see that only slide 5723646052 has samples of male origin. If we specify a simple cancer-based model with expt=pData(mSetSw)$status and batch=pData(mSetSw)$Slide, Harman will attribute the male-specific methylation signature of the two paired male samples on slide 5723646052 as batch effect and will try and eliminate it.

There are two strategies here: 1. Form a compound factor by joining the status and sex factors together. 2. Generate two Harman corrections, one for status and one for sex.

As this experiment is so small, the first strategy won’t be very effective. Only the factor level “F normal” is shared by both batches and for only one replicate. It’s very hard for Harman to get an idea of the batch distributions.

cancer_by_gender_factor <- as.factor(paste(pData(mSetSw)$sex,
                                           pData(mSetSw)$status)
                                     )
table(expt=cancer_by_gender_factor, batch=pData(mSetSw)$Slide)
##           batch
## expt       5723646052 5723646053
##   F cancer          0          2
##   F normal          1          1
##   M cancer          1          0
##   M normal          1          0

In the second strategy, both levels of expt are shared across both levels of batch. This is a far more ideal way to find batch effects. Of course though, there is confounding between sex and Slide! So, in these cases, do not consider a batch confounded factor in downstream differential analysis.

table(expt=pData(mSetSw)$status, batch=pData(mSetSw)$Slide)
##         batch
## expt     5723646052 5723646053
##   cancer          1          2
##   normal          2          1

4.1.2 Appropriate normalisation

If the Beta-values are shifted away from 0 or 1 by a very small amount, (say 1e-7), they will generate extreme M-values. Instead a moderate correction (such as 1e-4) seems the preferred option.

par(mfrow=c(2,2))
library(lumi, quietly = TRUE)
## 
## Attaching package: 'lumi'
## The following objects are masked from 'package:affy':
## 
##     MAplot, plotDensity
shifted_betas <- shiftBetas(betas=getBeta(mSetIl), shiftBy=1e-7)
shifted_ms <- beta2m(shifted_betas)  # same as logit2() from package minfi
plot(density(shifted_ms, 0.05), main="Shifted M-values, shiftBy = 1e-7",
     cex.main=0.7)

shifted_betas <- shiftBetas(betas=getBeta(mSetIl), shiftBy=1e-4)
shifted_ms <- beta2m(shifted_betas)  # same as logit2() from package minfi
plot(density(shifted_ms, 0.05), main="Shifted M-values, shiftBy = 1e-4",
     cex.main=0.7)

plot(density(beta2m(getBeta(mSetSw)), 0.05), main="SWAN normalised M-values",
     cex.main=0.7)

It can be seen that M-values have far more central-tendency (more Gaussian-like) than Beta-values.

par(mfrow=c(1,2))
plot(density(shifted_betas, 0.1), main="Beta-values, shiftBy = 1e-4",
     cex.main=0.7)
plot(density(shifted_ms, 0.1), main="M-values, shiftBy = 1e-4",
     cex.main=0.7)

A comparison of M-values produced by the GenomeStudio-like preprocessIllumina() function and by preprocessSWAN().

par(mfrow=c(1,2))
plot(density(shifted_ms, 0.1),
     main="GenomeStudio-like M-values, shiftBy = 1e-4", cex.main=0.7)
plot(density(getM(mSetSw), 0.1), main="SWAN M-values", cex.main=0.7)

From here on, we will work with SWAN normalised M-values.

4.1.3 Harman correction of M-values

For this example, status is declared as the experimental variable. When comparing conditions with very large DNA methylation differences, such as cancer and non-neoplastic samples, the batch effect will not be so easy to observe amongst all that biological variation. This scenario changes with a more subtle phenotype of interest. More arrays in each batch will allow Harman to more easily find batch effects. Considering this experiment is so small, an aggressive setting (limit=0.65) is needed to find a batch effect across a number of PCs (PCs 2, 5 and 1 in particular). A plot shows the correction made was relatively minor.

methHarman <- harman(getM(mSetSw), expt=pData(mSetSw)$status,
                     batch=pData(mSetSw)$Slide, limit=0.65)
summary(methHarman)
## Total factor levels:
## 
##  expt batch 
##     2     2 
## 
## Experiment x Batch Design:
## 
##         batch
## expt     5723646052 5723646053
##   cancer          1          2
##   normal          2          1
## 
## Simulation parameters:
## 100000 simulations (with seed of 0). ForceRand is FALSE.
## 
## Harman results with confidence limit of 0.65:
##  PC1  PC2  PC3  PC4  PC5  PC6 
## 0.96 0.61 1.00 1.00 0.92 0.81 
## 
## Top batch-effected PCs:
##  PC2  PC6  PC5  PC1 
## 0.61 0.81 0.92 0.96
plot(methHarman, 2, 5)

4.1.4 Reconstruct the corrected data

It is difficult to tease out the batch effect with such a small experimental group. Rather than further reduce the limit, let’s just convert the data back.

ms_hm <- reconstructData(methHarman)
betas_hm <- m2beta(ms_hm)

4.2 Limma analysis

In downstream differential methylation analysis using limma or otherwise, care must be taken to interpret the results. As Harman was run with the expt variable set to status, any other variation unrelated to status which is unbalanced across the two slides is considered as batch noise. For example, we have already shown that sex is a highly influential factor and it is unbalanced across the slides; only person of id3 is male and both the normal and cancer samples are on slide 5723646052. Therefore, we expect Harman to attribute this gender effect to a slide effect.

In the specification of a linear model of model.matrix(~id + group), we should then expect to find no differential methylation in person id3, the male. Let’s try this:

library(limma)

group <- factor(pData(mSetSw)$status, levels=c("normal", "cancer"))
id <- factor(pData(mSetSw)$person)
design <- model.matrix(~id + group)
design
##   (Intercept) idid2 idid3 groupcancer
## 1           1     0     1           0
## 2           1     1     0           0
## 3           1     0     1           1
## 4           1     0     0           1
## 5           1     0     0           0
## 6           1     1     0           1
## attr(,"assign")
## [1] 0 1 1 2
## attr(,"contrasts")
## attr(,"contrasts")$id
## [1] "contr.treatment"
## 
## attr(,"contrasts")$group
## [1] "contr.treatment"

Now time to fit this design to both the original M-values and the Harman corrected M-values.

fit_hm <- lmFit(ms_hm, design)
fit_hm <- eBayes(fit_hm)

fit <- lmFit(getM(mSetSw), design)
fit <- eBayes(fit)

Our intuition is correct. Harman has indeed squashed the variation in person id3, there are now no differentially methylated probes.

summary_fit_hm <- summary(decideTests(fit_hm))
summary_fit <- summary(decideTests(fit))
summary_fit_hm
##        (Intercept)  idid2  idid3 groupcancer
## Down        165294      0      0       19331
## NotSig       75554 466668 466668      434319
## Up          225820      0      0       13018
summary_fit
##        (Intercept)  idid2  idid3 groupcancer
## Down        162992      0   2648       13139
## NotSig       79907 466668 463847      443270
## Up          223769      0    173       10259

We also note, our ability to detect cancer-related differential methylation has been enhanced. There are now 6192 more hypermethylated CpG probes and 2759 more hypomethylated CpG probes.

5 Mass Spectrophotometry data example

5.1 Example dataset

We use the data available in the msmsEDA library which has 14 samples across two treatments and two batches.

5.1.1 Loading the mass-spec data

# Call dependencies
library(msmsEDA)
library(Harman)

data(msms.dataset)
msms.dataset
## MSnSet (storageMode: lockedEnvironment)
## assayData: 697 features, 14 samples 
##   element names: exprs 
## protocolData: none
## phenoData
##   sampleNames: U2.2502.1 U2.2502.2 ... U6.0302.3 (14 total)
##   varLabels: treat batch
##   varMetadata: labelDescription
## featureData: none
## experimentData: use 'experimentData(object)'
##   pubMedIds: http://www.ncbi.nlm.nih.gov/pubmed/22588121 
## Annotation:  
## - - - Processing information - - -
##  MSnbase version: 1.8.0

5.1.2 Preprocessing

The data matrix in an MSnSet object from package msmsEDA may have all zero rows (if it’s a subset of a larger object) and some samples may have NA values, which correspond to proteins not identified in that particular sample. Principle components analysis cannot be undertaken on matrices with such features. So first we can use the wrapper function pp.msms.data(), which removes all zero rows and replaces NA with 0.

# Preprocess to remove rows which are all 0 and replace NA values with 0.
msms_pp <- pp.msms.data(msms.dataset)

5.1.3 Batch structure

treat batch
U2.2502.1 U200 2502
U2.2502.2 U200 2502
U2.2502.3 U200 2502
U2.2502.4 U200 2502
U6.2502.1 U600 2502
U6.2502.2 U600 2502
U6.2502.3 U600 2502
U6.2502.4 U600 2502
U2.0302.1 U200 0302
U2.0302.2 U200 0302
U2.0302.3 U200 0302
U6.0302.1 U600 0302
U6.0302.2 U600 0302
U6.0302.3 U600 0302
# Create experimental and batch variables
expt <- pData(msms_pp)$treat
batch <- pData(msms_pp)$batch
table(expt, batch)
##       batch
## expt   0302 2502
##   U200    3    4
##   U600    3    4

5.1.4 Running Harman

# Log2 transform data, add 1 to avoid infinite values
log_ms_exprs <- log(exprs(msms_pp) + 1, 2)

# Correct data with Harman
hm <- harman(log_ms_exprs, expt=expt, batch=batch)
summary(hm)
## Total factor levels:
## 
##  expt batch 
##     2     2 
## 
## Experiment x Batch Design:
## 
##       batch
## expt   0302 2502
##   U200    3    4
##   U600    3    4
## 
## Simulation parameters:
## 100000 simulations (with seed of 0). ForceRand is FALSE.
## 
## Harman results with confidence limit of 0.95:
##  PC1  PC2  PC3  PC4  PC5  PC6  PC7  PC8  PC9 PC10 PC11 PC12 PC13 PC14 
## 0.06 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 0.35 
## 
## Top batch-effected PCs:
##  PC1 PC14 
## 0.06 0.35

The Harman result is interesting. This MS data seems to have the batch effect contained within the 1st and 14th PCs only. A marked difference compared to transcriptome microarray data and the like.

A plot rather convincingly shows that Harman was able to remove the batch effect.

plot(hm)

5.1.5 Reconstruct the corrected data

As usual we now reconstruct corrected data, but we add an extra transformation step on the end. As the data was Log2 transformed we convert it back to the original format (and subtract 1 as this was added before during the transformation into Log2 space). The corrected and transformed back data is placed into a new ‘MSnSet’ instance.

# Reconstruct data and convert from Log2, removing 1 as we added it before.
log_ms_exprs_hm <- reconstructData(hm)
ms_exprs_hm <- 2^log_ms_exprs_hm - 1

# Place corrected data into a new 'MSnSet' instance
msms_pp_hm <- msms_pp
exprs(msms_pp_hm) <- ms_exprs_hm

6 Comparison to ComBat

ComBat, available in the sva package, adjusts for known batches using an empirical Bayesian framework. This involves mean and variance shrinkage on a feature by feature basis using the Bayesian model to estimate the shrinkage parameters. To allow some robustness in estimates when the number of samples is low, the model pools information across genes.

Harman uses a dimensionality reduction approach with a confidence constraint set by the user. In this case, the features by samples matrix is decomposed into principal components. Unlike ComBat, batch adjustments are not on a feature by feature basis but on a principal component by principal component basis. Each orthogonal component is examined for evidence of a batch effect and if one is found, the batch means are moved step-wise towards zero in principal component space until the confidence limit for no evidence of a batch effect is met. Finally the adjusted PC scores are transformed back into raw data space.

Fundamentally, Harman shifts feature values in a coordinated way across a batch one prinicipal component at a time, whereas ComBat shifts feature values one feature at a time by an amount informed by the batch structure and overall mean and variance of the data.

To compare the techniques, we will apply the methods to a dataset and plot the difference between the original data matrix and after correction.

6.0.1 IMR90 example data

For this comparison we use the IMR90 data from the transcriptomics example earlier. This is the dataset used in the original ComBat paper by Johnson et al doi: 10.1093/biostatistics/kxj037

This data has 4 treatments and 3 batches.

table(imr90.info)
##          Batch
## Treatment 1 2 3
##         1 1 1 1
##         2 1 1 1
##         3 1 1 1
##         4 1 1 1

6.0.2 Applying Harman and ComBat to adjust for known batches

In accordance with the advice of Jeff Leek, for ComBat we do not include the variable of interest in specification of the model matrix.

library(HarmanData)
library(sva)

modcombat <- model.matrix(~1, data=imr90.info)
imr90.data.cb <- ComBat(dat=as.matrix(imr90.data), batch=imr90.info$Batch, mod=modcombat,
                        par.prior=TRUE, prior.plots=FALSE)
## Standardizing Data across genes
imr90.hr <- harman(imr90.data, expt = imr90.info$Treatment, batch = imr90.info$Batch)
imr90.data.hr <- reconstructData(imr90.hr)

prcompPlot(imr90.data, pc_x = 1, pc_y = 3,
           colFactor = imr90.info$Batch,
           pchFactor = imr90.info$Treatment,
           main='PC1 versus PC3')

arrowPlot(imr90.hr, pc_x = 1, pc_y = 3, main='PC1 versus PC3')

6.0.3 Compare

Plotting the differences between matrix values as a type of heatmap. The features of the microarray (rows) are ordered by the degree of correction in Harman.

library(RColorBrewer)

diffMap <- function(a, b, feature_order=1:nrow(a), batch, ...) {

  image(t(abs(a[feature_order, ] - b[feature_order, ])),
      col = brewer.pal(9, "Greys"),
      xaxt='n',
      yaxt='n',
      xlab='Batch',
      ylab='Ordered feature',
      ...)
  axis(1, at=seq(0, 1, length.out=length(batch)), labels=batch)
}
probe_diffs_hr <- order(rowSums(abs(as.matrix(imr90.data - imr90.data.hr))))
probe_diffs_cb <- order(rowSums(abs(as.matrix(imr90.data - imr90.data.cb))))

diffMap(a=imr90.data, b=imr90.data.hr, feature_order=probe_diffs_hr,
        batch=imr90.info$Batch, main='Original - Harman')

diffMap(a=imr90.data, b=imr90.data.cb, feature_order=probe_diffs_hr,
        batch=imr90.info$Batch, main='Original - ComBat')

diffMap(a=imr90.data.hr, b=imr90.data.cb, feature_order=probe_diffs_hr,
        batch=imr90.info$Batch, main='Harman - ComBat')

6.0.4 Concluding remarks

The feature by feature and sample by sample nature of ComBat is evident. In particular, the outlying sample in batch 3 has been subjected to quite extensive feature adjustment.

Harman adjusts the values of features within batches in a coordinated way. In is particular example, Harman identifies across batches a highly coordinate set of features which need correction.

Despite their differences, the Harman and Combat approaches have large overlaps in the features they identify as needing correction and the amount of feature adjustment required.