Package version: CONFESS 1.0.2

Contents

1 Preliminaries

CONFESS is a customized cell detection and signal estimation model for images coming from the Fluidigm C1 system. Applied to the HeLa CONFESSdata dataset, our method estimated the cell cycle phase of hundreds of samples from their fluorescence signals and enabled us to study the spatio-temporal dynamics of the HeLa cell cycle.

1.1 Loading the packages

To load the CONFESS package:

library(CONFESS)

1.2 Data pre-processing

The sample set of 14 raw C01 images are available in the CONFESSdata package on Bioconductor. Alternatively, the complete set of 378 images can be downloaded here. They include images for each of the following sets: - Bright Field (BF) images RawSC_BF.zip - Red & Green Channels (Ch) images RawSC_red_green.zip

CONFESS can take as input raw BMP or JPEG image files, or text-converted files. C01 files can be coverted with an external program like ImageJ (Fiji).

To do the conversion with Fiji, go to ImageJ (Fiji): Process –> Batch –> Convert, with the following options: “Output format”=Text Image. “Interpolation”=Bilinear and “scale factor”=1. Select the option “Read Images using Bio-Formats” and “convert”. You should get all txt files.

2 Fluorescence estimation

2.1 Reading in image/text files

The function readFiles reads the image/text filenames. If image data is used, all images should be in a single directory referenced by iDirectory. BFdirectory and CHdirectory would then reference the output directory for the Bright Field and Channel images. If the image files have been converted to text, iDirectory can be left empty, and BFdirectory and CHdirectory will now point to the input text files folders. These data should be stored in two different folders. This function will also report (and discard) any inconsistencies in the files being read (eg. BF file present but missing Red/Green channel). separator separates the image type (BF and channel characteristic types defined in image.type) from the rest of the sample name ID (consisting of the run ID and the well ID). A typical example of a sample name that is separated by “_" from the image type is the .C01 Bright Field image “1772-062-248_A01_BF.C01”. String “1772-062-248_A01” is the joined Run and Well ID (also separated by “_“). At this function though separator refers to the one separating”1772-062-248_A01" and “BF.C01” strings.

In this example, we read text-converted files available in the CONFESSdata package.

library(CONFESSdata)
data_path<-system.file("extdata",package="CONFESSdata")
files<-readFiles(iDirectory=NULL,
                  BFdirectory=paste(data_path,"/BF",sep=""),
                  CHdirectory=paste(data_path,"/CH",sep=""),
                  separator = "_",image.type = c("BF","Green","Red"),
                  bits=2^16)

2.2 Image spot estimation

To estimate the spots we need to specify a set of parameters. correctionAlgorithm should be FALSE in this estimation stage. If the parameter subset is not defined, all files read in with the readFiles function will be analysed. foregroundCut defines a series of cut-offs that separate the spot (a potential cell) from the background. The cut-offs are empirically picked. For this reason, it is often helpful to train the dataset by picking a subset of well-defined, single-spot images and check the algorithm’s performance using different values (e.g. the above vs seq(0.8,0.96,0.02)). In noisy data we have found that low cut-offs produce the best results. If the spot’s fluorescence signal is too weak to be detected or simply the cell is not present, CONFESS will perform capture site recognition (BF modeling) to estimate the pixel coordinates of the spot that, here, it is assumed to have a rectangular shape. The size of the side of this pseudo-spot is defined by BFarea. The signal is then quantified within this area. Note that only in BF modeling the spot is assumed to have a rectangular shape. Otherwise we do not make any assumptions on the shape and the size of the spot.

estimates <- spotEstimator(files=files,foregroundCut=seq(0.6,0.76,0.02),
                        BFarea=7,correctionAlgorithm=FALSE,savePlot="screen")

2.3 Quality control (identification of outliers)

The next step uses visual and statistical inspection tools for the identification of possible outliers. The spot estimates (of the samples stored in estimates) enter in the function through defineLocClusters.

The way of processing these data is controlled by out.method whose possible values are:

The function mainly produces run- and well- specific plots that enable the user to pick outlier locations. We have noticed that the Well IDs exhibit specific directionality (half of them are facing right and the rest left) that affects the position of the capture site. The output integrates the first-step estimates and the quality control. The code below shows the quality control process under interactive.manual. interactive.clustering requires at least 15 samples in each run- / well- category (it will exit with an error here). When applied on all data, it enables the user to select outliers by entering a pre-calculated radius in an auto-generated message similar to the one below.

clu <- defineLocClusters(LocData=estimates,out.method="interactive.manual")
#"Hit Enter to move to the next image or A + Enter to Abort:"

Option interactive.manual enables the user to select suspicious data manually by point-and-click on the plot. The algorithm will select the closest spot only once of the location that has been selected by the point-and-click (thus in closely located spots one can click as many times as he wants around to make sure that everything is selected). In Windows the user clicks on any number of spots that could be potential outliers and completes the procedure by clicking on the ‘Stop’ button appearing on the top/left of the console. In Linux/Mac the ‘Stop’ button is replaced by right clicking anywhere on the image. In Rstudio the process stops with the ‘Esc’ button.

Important Note: Please follow the pipeline’s instructions on how to stop this process at any time you wish. Closing the plot window may cause a fatal error and abnormal exit. To stop the process simply press A and Enter (Abort) when prompted!

2.4 Re-estimation step (for outliers)

The selected samples now undergo BF modelling using spotEstimator with correctionAlgorithm = TRUE. The potential outliers that had been originally estimated by BF modelling are not re-estimated. They are only kept in a separate slot for manual inspection by our graphical tools. QCdata contains the output of the quality control step. median.correction=TRUE instructs the function to shift all locations with outlier BF modeling estimates (more than cutoff=50 pixels away from the bulk of the estimates) to the median of the bulk estimates (denoted as confidence in the output table).

estimates.2 <- spotEstimator(files=files,subset=clu$Outlier.indices,
                             foregroundCut=seq(0.6,0.76,0.02),correctionAlgorithm=TRUE,
                             cutoff=50,QCdata=clu,median.correction=TRUE,
                             savePlot="screen") 

2.5 Final estimation

The final output is given by ```LocationMatrix}. Apart from listing the locations and the signal estimates, it quantifies the cell existence via a set of user defined filters. The possible filters are:

A typical example of filtering with more than one filter is the following:

Results <- LocationMatrix(data=estimates.2,
                          filter.by = matrix(c("FDR","Out.Index",0.005,"confidence"),ncol=2))
Results$Output[1:3,]
##           SampleID   X   Y Size    Estimation.Type fore_Green back_Green
## 1 1772-062-248_A01 259 367   31 Fluorescence-based   48.39921   17.18394
## 2 1772-062-248_A02 261 335   49 Chip.Pattern-based   18.35271   16.83558
## 3 1772-062-248_A03 262 368   19 Fluorescence-based   26.18448   16.61236
##    fore_Red back_Red   Signal-to-Noise               Pvalue
## 1 219.07155 17.54451  3.56890858499769  6.1613286606443e-07
## 2  19.77144 17.82936 0.141617112045591    0.999999998435555
## 3  86.50398 17.49461  2.24224362943183 7.12880016829537e-05
##                    FDR     Out.Index
## 1 1.60194545176752e-06    confidence
## 2                    1 contamination
## 3   0.0001684989130688    confidence
##                                        Other.Spots Cells
## 1                                                0     1
## 2                                                0     0
## 3 X = 30, Y = 204 (Green) | X = 262, Y = 368 (Red)     1

This will keep all ‘confident’ spots with FDR adjusted P-value < 0.005 (in any of the channels). The filters allow the ‘spot’ to ‘cell’ transition by quantifying certain properties that only cells should have. The output of LocationMatrix should always be manually curated via inspection of the spotEstimator plots.

The output table summarizes the estimates of the image analysis step. Most of the columns are self-explained. ‘fore’ corresponds to foreground (spot) and ‘back’ to the background signal. ‘Other.Spots’ indicates whether CONFESS the location of all other spot signals found in a particular image. In the example of sample ‘1772-062-248_A03’ it notifies us that it estimated the location ‘X = 30, Y = 204’ in the Green channel and ‘X = 262, Y = 368’ in the Red Channel (the latter has been correctly kept as reliable in the X, Y columns). Finally ‘Cells’ is the transition column that reports predicted cells (marked with 1s) via the various filters that we set.

3 Fluorescence adjustment and estimation of cell cycle phases / pseudotime

3.1 Fluorescence adjustment on estimations from Section 2.6

To perform signal adjustment we use the relevant data of the previous step.

# step1 <-createFluo(Results) #from previous section's results
step1 <- createFluo(from.file=system.file("extdata", "Results_of_image_analysis.txt", 
                                        package = "CONFESS"),separator="_")
## [1] "Run 1772-062-248 was converted into 1"
## [1] "Run 1772-062-249 was converted into 2"
## [1] "Run 1772-064-103 was converted into 3"
## [1] "Run 1772-067-038 was converted into 4"
## [1] "Run 1772-067-039 was converted into 5"

separator separates the run from the well ID and it is kept here because createFluo can be based on data from a file that is not necessarily obtained from the above process (but it should have the above format!).

3.2 Data inspection by batch (chip)

In step1 we store the sample IDs, the raw fluorescence signals, the areas and the Run IDs of all reliable samples into a list. We can quickly check the distribution of the signals by run/batch using the following commands:

print(unique(step1$batch))
##      [,1]           [,2]
## [1,] "1772-062-248" "1" 
## [2,] "1772-062-249" "2" 
## [3,] "1772-064-103" "3" 
## [4,] "1772-067-038" "4" 
## [5,] "1772-067-039" "5"

3.2.1 If data consists of more than 1 chip run/batch

This step would perform signal adjustment by BGmethod="normexp" for image background within a mixtures of regression model with maximum maxMix=3 mixture components (the optimal number is estimated) that is also correcting for the run (batch) effects. Plots will be generated to show how each channel has been normalized and adjusted. The seed parameter serves only for reproducibility of the results.

step2<-Fluo_adjustment(data=step1,transformation="log",maxMix=3,prior.pi=0.1,
                       flex.reps = 50, single.batch.analysis=5,
                       savePlot="screen",seed=999)

Data will now be clustered and the group numbers will be labelled on the centroids.

step2.1<-getFluo(data=step2)
step3<-Fluo_inspection(data=step2.1,fixClusters=0,altFUN="kmeans",
                       k.max=15,B.kmeans=50,savePlot="screen")

The user should select the starting cluster, i.e. the start of the progression path. In circular paths like this one (representing a cell cycle process) any cluster can serve as starting. In this example, we select the bottom/left one (path.start=3) that is well-separated from the previous and looks like a starting point. pathEstimator will estimate the progression path assumed to progressing in a ‘clockwise’ and ‘circular’ manner.

step3.1<-pathEstimator(step3,path.start=3,path.type=c("circular","clockwise"),
                       joinedGroups=NULL)
step4<-Fluo_modeling(data=step3.1,init.path=step3.1$Path,VSmethod="DDHFmv",
                     CPmethod="ECP",CPgroups=5,CPpvalue=0.01,CPmingroup=10)
step5<-Fluo_ordering(data=step4,savePlot="screen")

step4 and step5 contain the main analytical steps that perform both cell ordering and cluster estimation by fluorescence signal. The plots show the distinct clusters (top) and the channel differences by estimated pseudotime (bottom). The data have been transformed by VSmethod="DDHFmv" and the change-point analysis was run by CPmethod="ECP" that identifies distinct clusters at significance level CPpvalue=0.01. The main output of Fluo_ordering is the following table with the estimates of interest:

head(step5$Summary_results,3)
##      Index Samples            Runs           Size  Corr.Size         
## [1,] "1"   "1772-062-248_A01" "1772-062-248" "31"  "3.43398720448515"
## [2,] "2"   "1772-062-248_A03" "1772-062-248" "19"  "2.94443897916644"
## [3,] "3"   "1772-062-248_A04" "1772-062-248" "152" "5.02388052084628"
##      Pseudotime log(Red)           log(Green)         DDHFmv(Red)       
## [1,] "110"      "3.282535641777"   "5.25713448533138" "90.1990747676997"
## [2,] "58"       "2.25110342328328" "4.23750445781466" "86.2887166877148"
## [3,] "229"      "3.21246017722294" "1.84295725977724" "88.4155726915282"
##      DDHFmv(Green)      DDHFmv(Red)-DDHFmv(Green) Clusters
## [1,] "94.869771164397"  "-4.67069639669729"       "2"     
## [2,] "92.4836895888364" "-6.1949729011216"        "2"     
## [3,] "84.1004733540749" "4.3150993374533"         "5"     
##      Residuals            Out.Index
## [1,] "-0.796281524708131" "normal" 
## [2,] "-1.15598100445746"  "normal" 
## [3,] "-1.85390433974894"  "normal"

3.2.2 If data consists of a single chip run/batch

If the data come from a single run, Fluo_adjustment is replaced by getFluo_byRun that performs only image background correction. The rest of the steps are as before. Note that in the example code below, we run the analysis on a subset of the original data, i.e. only those coming from batch=1. The data have been selected by FluoSelection_byRun that can be used to select either specific batch(es) or specific data across all batches. An example of the latter is provided in the next section.

step1.1<-FluoSelection_byRun(data=step1,batch=1)
step2<-getFluo_byRun(data=step1.1,BGmethod="normexp",savePlot="screen")
step3<-Fluo_inspection(data=step2,fixClusters=0,altFUN="kmeans",k.max=15,
                       savePlot="screen")
step3.1 <- pathEstimator(step3,path.start=2,path.type=c("circular","clockwise"))
step4 <- Fluo_modeling(data=step3.1,init.path=step3.1$Path,VSmethod="DDHFmv",
                       CPmethod="ECP",CPpvalue=0.01)
step5<-Fluo_ordering(data=step4,savePlot="screen")

3.3 Cross-validation to assess the stability of the estimates

It takes the initial data (step1) and automatically runs all steps step2 - step4 above for one or more reference runs (single.batch.analysis). The reference run defines which run we use to adjust the data at Fluo_adjustment()) Finally, cross-validation is done with Fluo_CV_modeling.

  1. remove samples at random and generates ‘new clusters’
  2. put back the excluded samples and re-estimate them (based on the ‘new clusters’)
  3. Repeat this B > 2 times (B = 2 is too little)
  4. summarize and evaluate how different your full data estimates are from from cross-validation estimates
step1 <- createFluo(from.file=system.file("extdata", "Results_of_image_analysis.txt", 
                                        package = "CONFESS"))
steps2_4<-Fluo_CV_prep(data=step1,init.path = rep("bottom/left",2),
                       path.type=c("circular","clockwise"),maxMix=3,
                       single.batch.analysis = 5,transformation = "log",prior.pi = 0.1,
                       flex.reps=5,areacut=49,fixClusters=0,altFUN="kmeans",
                       k.max=15,VSmethod="DDHFmv",CPmethod="ECP",CPgroups=5,
                       B.kmeans=5,CPpvalue=0.01,CPmingroup=15,savePlot="OFF",seed=999)
steps2_4cv.1<-Fluo_CV_modeling(data=steps2_4,B=10,batch=1:4,perc.cutoff=0.6,q=0.9,
                               f=0.99,seed.it=TRUE,pseudotime.cutoff=20,savePlot="screen")

You can do the same thing by removing and re-estimating a whole batch. In Fluo_CV_modeling we must set B=1 because the whole batch is removed once and there is no random samples to be excluded iteratively as above. The command below will remove and re-estimate batch 1.

steps2_4cv.2<-Fluo_CV_modeling(data=steps2_4,B=1,batch=1:4,perc.cutoff=0.6,q=0.9,
                             f=0.99,seed.it=TRUE,pseudotime.cutoff=20,savePlot="screen")

The output of Fluo_CV_modeling is a list with the results of the original estimates (step5) and the CV-based estimates. The latter are newly predicted pseudotimes and clusters by two methods: median / original and median / null. They both integrate the information of the CV and the originally estimated pseudotimes by building kmean clusters of the B CV estimates for each sample i and defining pseudotime(i) = median(pseudotime(set1,i)) where set1 is a subset of the B pseudotimes that exhibit some similarity. The similarity is assessed by k-means clustering. This subset should contain a large percentage of the B data (higher than a user defined cut-off) and it’s median should be lower than the q-th (user defined) quantile of the average differences between the original and the CV-estimated pseudotimes across all samples.

Under the former method, if the CV estimated pseudotimes do not satisfy the above requirements then the algorithm returns pseudotime(i) = median(pseudotime(set2,i)) where set2 is the cluster of B pseudotimes that minimizes |median (pseudotimes(set2,i)) - original.pseudotimes|. Under the latter method, if the CV estimated pseudotimes do not satisfy the above requirements then the algorithm returns pseudotime(i) = NULL. The NULL data should be removed from the analysis. Any of the above slots can be used in Fluo_ordering to obtain new / alternative results.