1 Introduction

Post-transcriptional modifications can be found abundantly in rRNA and tRNA and can be detected classically via several strategies. However, difficulties arise if the identity and the position of the modified nucleotides is to be determined at the same time. Classically, a primer extension, a form of reverse transcription (RT), would allow certain modifications to be accessed by blocks during the RT changes or changes in the cDNA sequences. Other modification would need to be selectively treated by chemical reactions to influence the outcome of the reverse transcription.

With the increased availability of high throughput sequencing, these classical methods were adapted to high throughput methods allowing more RNA molecules to be accessed at the same time. However, patterns of some modification cannot be detected by accessing small number of parameters. For these cases machine learning models can be trained on data from positions known to be modified in order to detect additional modified positions.

To extend the functionality of the RNAmodR package and classical detection strategies used for RiboMethSeq or AlkAnilineSeq (see RNAmodR.RiboMethSeq and RNAmodR.AlkAnilineSeq packages) towards detection through machine learning models, RNAmodR.ML provides classes and an example workflow.

2 Using RNAmodR.ML

## snapshotDate(): 2022-04-19
library(rtracklayer)
library(GenomicRanges)
library(RNAmodR.ML)
library(RNAmodR.Data)

The ModifierML class extends the Modifier class from the RNAmodR package and adds one slot, mlModel, a getter/setter getMLModel/setMLModel, an additional useMLModel function to be called from the aggregate function.

The slot mlModel can either be an empty character or contain a name of a ModifierMLModel class, which is loaded upon creation of a ModifierML object, and serves as a wrapper around a machine learning model. For different types of machine learning models ModifierMLModel derived classes are available, which currently are:

To illustrate how to develop a machine learning model with help from the RNAmodR.ML package, an example is given below.

3 Development of new Modifier class

As an example for this vignette, we will try to detect D positions in AlkAnilineSeq data. First define a specific ModifierML class loading pileup and coverage data. In this example, the RNA specific RNAModifierML class is used.

setClass("ModMLExample",
         contains = c("RNAModifierML"),
         prototype = list(mod = c("D"),
                          score = "score",
                          dataType = c("PileupSequenceData",
                                       "CoverageSequenceData"),
                          mlModel = character(0)))
# constructor function for ModMLExample
ModMLExample <- function(x, annotation = NA, sequences = NA, seqinfo = NA,
                           ...){
  RNAmodR:::Modifier("ModMLExample", x = x, annotation = annotation,
                     sequences = sequences, seqinfo = seqinfo, ...)
}

setClass("ModSetMLExample",
         contains = "ModifierSet",
         prototype = list(elementType = "ModMLExample"))
# constructor function for ModSetMLExample
ModSetMLExample <- function(x, annotation = NA, sequences = NA, seqinfo = NA,
                              ...){
  RNAmodR:::ModifierSet("ModMLExample", x, annotation = annotation,
                        sequences = sequences, seqinfo = seqinfo, ...)
}

Since the mlModel slot contains an empty character, the creation of the object will not automatically trigger a search for modifications. However, it will aggregate the data in the format we want to use. The aggregate_example function is just an example and the aggregation of the data is part of the model building. (See (#Summary))

setMethod(
  f = "aggregateData",
  signature = signature(x = "ModMLExample"),
  definition =
    function(x){
      aggregate_example(x)
    }
)

4 Getting training data

To gather training data, we just create a ModMLExample object and let it do its job.

me <-  ModMLExample(files[[1]], annotation, sequences)
## Import genomic features from the file as a GRanges object ... OK
## Prepare the 'metadata' data frame ... OK
## Make the TxDb object ... OK
## Loading Pileup data from BAM files ... OK
## Loading Coverage data from BAM files ... OK
## Aggregating data and calculating scores ... Starting to search for 'Dihydrouridine' ...
## Warning: ML model not set. Skipped search for modifications ...
## done.

Afterwards we need to load/create coordinates for positions known to be modified as well as positions known to be unmodified.

data("dmod",package = "RNAmodR.ML")
# we just select the next U position from known positions
nextUPos <- function(gr){
  nextU <- lapply(seq.int(1L,2L),
                  function(i){
                    subseq <- subseq(sequences(me)[dmod$Parent], start(dmod)+3L)
                    pos <- start(dmod) + 2L + 
                      vapply(strsplit(as.character(subseq),""),
                    function(y){which(y == "U")[i]},integer(1))
                    ans <- dmod
                    ranges(ans) <- IRanges(start = pos, width = 1L)
                    ans
                  })
  nextU <- do.call(c,nextU)
  nextU$mod <- NULL
  unique(nextU)
}
nondmod <- nextUPos(dmod)
nondmod <- nondmod[!(nondmod %in% dmod)]
coord <- unique(c(dmod,nondmod))
coord <- coord[order(as.integer(coord$Parent))]

With these coordinates the aggregated data of the ModMLExample can be subset to a training data set using the function trainingData.

trainingData <- trainingData(me,coord)
trainingData <- unlist(trainingData, use.names = FALSE)
# converting logical labels to integer
trainingData$labels <- as.integer(trainingData$labels)

5 Training a model

How a specific model can be trained or what kind of strategies can be employed to successfully train a model, is out of scope for the vignette. For this example a random forest is trained using the functionality provided by the ranger package.

library(ranger)
model <- ranger(labels ~ ., data.frame(trainingData))

6 Constructing a ‘ModifierMLModel’

Now, the trained model can be used to create a new ModifierMLModel class and object.

setClass("ModifierMLexample",
         contains = c("ModifierMLranger"),
         prototype = list(model = model))
ModifierMLexample <- function(...){
  new("ModifierMLexample")
}
mlmodel <- ModifierMLexample()

To be able to use the model via the ModifierMLModel class, we also need to define an accessor to the predictions made by the model. This function is called useModel and is already prefined for the ModifierMLModel classes mentioned above in secion Using RNAmodR.ML.

getMethod("useModel", c("ModifierMLranger","ModifierML"))
## Method Definition:
## 
## function (x, y) 
## {
##     data <- getAggregateData(y)
##     model <- x@model
##     if (!is(model, "ranger")) {
##         stop("model is not a ranger model")
##     }
##     unlisted_data <- unlist(data, use.names = FALSE)
##     p <- predict(x@model, data.frame(unlisted_data))
##     relist(p$predictions, data)
## }
## <bytecode: 0x55da46913c60>
## <environment: namespace:RNAmodR.ML>
## 
## Signatures:
##         x                  y           
## target  "ModifierMLranger" "ModifierML"
## defined "ModifierMLranger" "ModifierML"

If the results of these function is not usable for a specific model, it can redefined for your needs. As defined by RNAmodR.ML the function returns a NumericList along the aggregated data of the ModifierML object.

7 Setting and using the model

The generated ModifierMLexample wrapper can now be set for the ModifierML object using the setMLModel function. (If a model is saved as part of a package, this step ist not necessary, because it can be part of the class definition)

setMLModel(me) <- mlmodel

In order for the prediction data to be usable, another function has to be implemented to save the predictions in the aggregated data. The function is called useMLModel.

setMethod(f = "useMLModel",
          signature = signature(x = "ModMLExample"),
          definition =
            function(x){
              predictions <- useModel(getMLModel(x), x)
              data <- getAggregateData(x)
              unlisted_data <- unlist(data, use.names = FALSE)
              unlisted_data$score <- unlist(predictions)
              x@aggregate <- relist(unlisted_data,data)
              x
            }
)

By re-running the aggregate function and force an update of the data, the predictions are made and used to populate the score column as outlined above.

me <- aggregate(me, force = TRUE)

8 Performance

During the model building phase some form of a performance measurement usually is included. In addition to these model specific measurements, RNAmodR.ML includes the functionality from the ROCR package inherited from the RNAmodR package. With this the performance of a model can evaluted over the training set or any coordinates.

plotROC(me, dmod)
Performance of the maching learning model to distinguish unmodified from modified nucleotides.

Figure 1: Performance of the maching learning model to distinguish unmodified from modified nucleotides

9 Using a ModifierML class

Since we want to use the ModifierML object to detect modifications, we also need to define the findMod function. Based on the information on the performance, we set a threshold of 0.8 for the prediction score for detecting D modifications. In the example below this threshold is hardcoded in the find_mod_example function, but can also be implemented using the settings function.

setMethod(
  f = "findMod",
  signature = signature(x = "ModMLExample"),
  definition =
    function(x){
      find_mod_example(x, 25L)
    }
)

Now we can redfine the ModMLExample class with the slot mlModel already set to the ModifierMLexample class. The ModMLExample is now complete.

rm(me)
setClass("ModMLExample",
         contains = c("RNAModifierML"),
         prototype = list(mod = c("D"),
                          score = "score",
                          dataType = c("PileupSequenceData",
                                       "CoverageSequenceData"),
                          mlModel = "ModifierMLexample"))
me <-  ModMLExample(files[[1]], annotation, sequences)
## Import genomic features from the file as a GRanges object ... OK
## Prepare the 'metadata' data frame ... OK
## Make the TxDb object ... OK
## Loading Pileup data from BAM files ... OK
## Loading Coverage data from BAM files ... OK
## Aggregating data and calculating scores ... Starting to search for 'Dihydrouridine' ... done.

The detected modifications can be access using the modifications function.

mod <- modifications(me)
mod <- split(mod, factor(mod$Parent,levels = unique(mod$Parent)))
mod
## GRangesList object of length 35:
## $`1`
## GRanges object with 2 ranges and 5 metadata columns:
##             seqnames    ranges strand |         mod      source        type
##                <Rle> <IRanges>  <Rle> | <character> <character> <character>
##   [1] Q0020_15S_RRNA        48      + |           D  RNAmodR.ML      RNAMOD
##   [2] Q0020_15S_RRNA       323      + |           D  RNAmodR.ML      RNAMOD
##           score      Parent
##       <numeric> <character>
##   [1]    0.9062           1
##   [2]    0.8256           1
##   -------
##   seqinfo: 60 sequences from an unspecified genome; no seqlengths
## 
## $`3`
## GRanges object with 6 ranges and 5 metadata columns:
##       seqnames    ranges strand |         mod      source        type     score
##          <Rle> <IRanges>  <Rle> | <character> <character> <character> <numeric>
##   [1]  RDN18-1       144      + |           D  RNAmodR.ML      RNAMOD  0.809633
##   [2]  RDN18-1       229      + |           D  RNAmodR.ML      RNAMOD  0.824333
##   [3]  RDN18-1       494      + |           D  RNAmodR.ML      RNAMOD  0.801667
##   [4]  RDN18-1       839      + |           D  RNAmodR.ML      RNAMOD  0.809333
##   [5]  RDN18-1      1225      + |           D  RNAmodR.ML      RNAMOD  0.801633
##   [6]  RDN18-1      1669      + |           D  RNAmodR.ML      RNAMOD  0.831300
##            Parent
##       <character>
##   [1]           3
##   [2]           3
##   [3]           3
##   [4]           3
##   [5]           3
##   [6]           3
##   -------
##   seqinfo: 60 sequences from an unspecified genome; no seqlengths
## 
## $`4`
## GRanges object with 6 ranges and 5 metadata columns:
##       seqnames    ranges strand |         mod      source        type     score
##          <Rle> <IRanges>  <Rle> | <character> <character> <character> <numeric>
##   [1]  RDN25-1         2      + |           D  RNAmodR.ML      RNAMOD  0.824600
##   [2]  RDN25-1       748      + |           D  RNAmodR.ML      RNAMOD  0.837100
##   [3]  RDN25-1      1415      + |           D  RNAmodR.ML      RNAMOD  0.821667
##   [4]  RDN25-1      1720      + |           D  RNAmodR.ML      RNAMOD  0.835600
##   [5]  RDN25-1      1818      + |           D  RNAmodR.ML      RNAMOD  0.811933
##   [6]  RDN25-1      2571      + |           D  RNAmodR.ML      RNAMOD  0.845267
##            Parent
##       <character>
##   [1]           4
##   [2]           4
##   [3]           4
##   [4]           4
##   [5]           4
##   [6]           4
##   -------
##   seqinfo: 60 sequences from an unspecified genome; no seqlengths
## 
## ...
## <32 more elements>

10 Refining a model

Some of the modification found look reasonable. However, some of the positions seem to be noise.

options(ucscChromosomeNames=FALSE)
plotDataByCoord(sequenceData(me),mod[["4"]][1])
Visualization of sequence data

Figure 2: Visualization of sequence data

Several options exist to improve the model: Either the threshold applied to the prediction score can be raised to a higher value, like 0.9 or the model can maybe retrained by including these position in another training data set. In addition, the training data might be improved in general by higher sequencing depth.

nonValidMod <- mod[c("1","4")]
nonValidMod[["18"]] <- nonValidMod[["18"]][2]
nonValidMod[["26"]] <- nonValidMod[["26"]][2]
nonValidMod <- unlist(nonValidMod)
nonValidMod <- nonValidMod[,"Parent"]
coord <- unique(c(dmod,nondmod,nonValidMod))
coord <- coord[order(as.integer(coord$Parent))]

As an example, a new model is trained including the wrongly identified positions from the previous model as unmodified positions.

trainingData <- trainingData(me,coord)
trainingData <- unlist(trainingData, use.names = FALSE)
trainingData$labels <- as.integer(trainingData$labels)
model2 <- ranger(labels ~ ., data.frame(trainingData), num.trees = 2000)
setClass("ModifierMLexample2",
         contains = c("ModifierMLranger"),
         prototype = list(model = model2))
ModifierMLexample2 <- function(...){
  new("ModifierMLexample2")
}
mlmodel2 <- ModifierMLexample2()
me2 <- me
setMLModel(me2) <- mlmodel2
me2 <- aggregate(me2, force = TRUE)

After updating the ModifierMLexample class and aggregating the data again the performance looks a bit better…

plotROC(me2, dmod, score="score")
Performance aggregation of multiple samples and strategies.

Figure 3: Performance aggregation of multiple samples and strategies

… and leads to a better result for detecting D modifications. Some positions are not detected anymore, which suggest that this model is still not an optimal solution and other factors could and should be improved upon as suggested above.

setMethod(
  f = "findMod",
  signature = signature(x = "ModMLExample"),
  definition =
    function(x){
      find_mod_example(x, 25L)
    }
)
me2 <- modify(me2, force = TRUE)
modifications(me2)
## GRanges object with 44 ranges and 5 metadata columns:
##         seqnames    ranges strand |         mod      source        type
##            <Rle> <IRanges>  <Rle> | <character> <character> <character>
##    [1]  tA-AGC-D        47      + |           D  RNAmodR.ML      RNAMOD
##    [2]  tA-TGC-A        47      + |           D  RNAmodR.ML      RNAMOD
##    [3]  tC-GCA-B        19      + |           D  RNAmodR.ML      RNAMOD
##    [4]  tC-GCA-B        46      + |           D  RNAmodR.ML      RNAMOD
##    [5]  tE-CTC-D        20      + |           D  RNAmodR.ML      RNAMOD
##    ...       ...       ...    ... .         ...         ...         ...
##   [40] tV-AAC-E1        48      + |           D  RNAmodR.ML      RNAMOD
##   [41]  tV-AAC-O        48      + |           D  RNAmodR.ML      RNAMOD
##   [42]  tV-CAC-D        47      + |           D  RNAmodR.ML      RNAMOD
##   [43] tW-CCA-G1        46      + |           D  RNAmodR.ML      RNAMOD
##   [44]  tY-GTA-D        21      + |           D  RNAmodR.ML      RNAMOD
##            score      Parent
##        <numeric> <character>
##    [1]  0.959158           6
##    [2]  0.958750           7
##    [3]  0.904362           8
##    [4]  0.940502           8
##    [5]  0.837033          11
##    ...       ...         ...
##   [40]  0.881592          55
##   [41]  0.930158          56
##   [42]  0.921636          57
##   [43]  0.825525          59
##   [44]  0.904508          60
##   -------
##   seqinfo: 60 sequences from an unspecified genome; no seqlengths

In addition to training a single model, several models can be trained and combined to a ModifierSet.

mse <- ModSetMLExample(list(one = me, two = me2))

An overall performance over several models can be analyzed or the individual performance compaired.

plotROC(mse, dmod, score= "score",
        plot.args = list(avg = "threshold", spread.estimate = "stderror"))
Performance average across models

Figure 4: Performance average across models

If several models are trained and each provides useful information, these can be package into a single ModifierMLModel class to combine the output of several models. Some of the functions outlined above need, e.g. useMLModel and/or useModel, to be modified to provide one or more scores for detecting a modification.

11 Packaging

If the created models can be saved to file, they can also be included in a package. This would allow others to use the models and the models can potentially be improved upon with increasing version numbers.

12 Summary

RNAmodR.ML provides the interface for machine learning models to be used with RNAmodR to detect modified nucleotides in high throughput sequencing data. For your own work defining a working model might take some time. We hope that by using RNAmodR.ML the steps surrounding this crucial step might become a bit easier.

However, if some steps or design choices made for RNAmodR.ML do not suit your need, let us know. Contributions are always welcome as well.

13 Hints

We also want to provide some additional hints and suggestions for developing machine learning models.

  1. the aggregate function is used in the example above as a feature engineering tool. You might want to skip this step, if you want to use a deep learning model for example with keras.
  2. If you don’t want to engage in a feature enginering step and just want to aggregate the sequence data as is, just do a custom cbind on the data from the SequenceData objects (cbind works on SequenceData objects, if they are of the same type. Convert each of them to a CompressedSplitDataFrameList using as(x,"CompressedSplitDataFrameList")).
  3. in a deep learning context, if a coordinate is selected without a flanking value, e.g. when using trainingData, a 2D tensor is returned (sample, values). This can be converted into a 3D tensor by providing a flanking value.

14 Sessioninfo

sessionInfo()
## R version 4.2.0 RC (2022-04-19 r82224)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 20.04.4 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.15-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.15-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_GB              LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] stats4    stats     graphics  grDevices utils     datasets  methods  
## [8] base     
## 
## other attached packages:
##  [1] ranger_0.13.1            Rsamtools_2.12.0         RNAmodR.Data_1.9.0      
##  [4] ExperimentHubData_1.22.0 AnnotationHubData_1.26.0 futile.logger_1.4.3     
##  [7] ExperimentHub_2.4.0      AnnotationHub_3.4.0      BiocFileCache_2.4.0     
## [10] dbplyr_2.1.1             RNAmodR.ML_1.10.0        RNAmodR_1.10.0          
## [13] Modstrings_1.12.0        Biostrings_2.64.0        XVector_0.36.0          
## [16] rtracklayer_1.56.0       GenomicRanges_1.48.0     GenomeInfoDb_1.32.0     
## [19] IRanges_2.30.0           S4Vectors_0.34.0         BiocGenerics_0.42.0     
## [22] BiocStyle_2.24.0        
## 
## loaded via a namespace (and not attached):
##   [1] backports_1.4.1               Hmisc_4.7-0                  
##   [3] plyr_1.8.7                    lazyeval_0.2.2               
##   [5] splines_4.2.0                 BiocParallel_1.30.0          
##   [7] ggplot2_3.3.5                 digest_0.6.29                
##   [9] ensembldb_2.20.0              htmltools_0.5.2              
##  [11] magick_2.7.3                  fansi_1.0.3                  
##  [13] magrittr_2.0.3                checkmate_2.1.0              
##  [15] memoise_2.0.1                 BSgenome_1.64.0              
##  [17] cluster_2.1.3                 ROCR_1.0-11                  
##  [19] matrixStats_0.62.0            prettyunits_1.1.1            
##  [21] jpeg_0.1-9                    colorspace_2.0-3             
##  [23] blob_1.2.3                    rappdirs_0.3.3               
##  [25] xfun_0.30                     dplyr_1.0.8                  
##  [27] crayon_1.5.1                  RCurl_1.98-1.6               
##  [29] jsonlite_1.8.0                graph_1.74.0                 
##  [31] survival_3.3-1                VariantAnnotation_1.42.0     
##  [33] glue_1.6.2                    gtable_0.3.0                 
##  [35] zlibbioc_1.42.0               DelayedArray_0.22.0          
##  [37] scales_1.2.0                  futile.options_1.0.1         
##  [39] DBI_1.1.2                     Rcpp_1.0.8.3                 
##  [41] xtable_1.8-4                  progress_1.2.2               
##  [43] htmlTable_2.4.0               foreign_0.8-82               
##  [45] bit_4.0.4                     OrganismDbi_1.38.0           
##  [47] Formula_1.2-4                 AnnotationForge_1.38.0       
##  [49] htmlwidgets_1.5.4             httr_1.4.2                   
##  [51] gplots_3.1.3                  RColorBrewer_1.1-3           
##  [53] ellipsis_0.3.2                pkgconfig_2.0.3              
##  [55] XML_3.99-0.9                  Gviz_1.40.0                  
##  [57] nnet_7.3-17                   sass_0.4.1                   
##  [59] utf8_1.2.2                    tidyselect_1.1.2             
##  [61] rlang_1.0.2                   reshape2_1.4.4               
##  [63] later_1.3.0                   AnnotationDbi_1.58.0         
##  [65] biocViews_1.64.0              munsell_0.5.0                
##  [67] BiocVersion_3.15.2            tools_4.2.0                  
##  [69] cachem_1.0.6                  cli_3.3.0                    
##  [71] generics_0.1.2                RSQLite_2.2.12               
##  [73] evaluate_0.15                 stringr_1.4.0                
##  [75] fastmap_1.1.0                 yaml_2.3.5                   
##  [77] knitr_1.38                    bit64_4.0.5                  
##  [79] caTools_1.18.2                purrr_0.3.4                  
##  [81] KEGGREST_1.36.0               AnnotationFilter_1.20.0      
##  [83] RBGL_1.72.0                   mime_0.12                    
##  [85] formatR_1.12                  xml2_1.3.3                   
##  [87] biomaRt_2.52.0                compiler_4.2.0               
##  [89] rstudioapi_0.13               filelock_1.0.2               
##  [91] curl_4.3.2                    png_0.1-7                    
##  [93] interactiveDisplayBase_1.34.0 tibble_3.1.6                 
##  [95] bslib_0.3.1                   stringi_1.7.6                
##  [97] highr_0.9                     GenomicFeatures_1.48.0       
##  [99] lattice_0.20-45               ProtGenerics_1.28.0          
## [101] Matrix_1.4-1                  vctrs_0.4.1                  
## [103] stringdist_0.9.8              BiocCheck_1.32.0             
## [105] pillar_1.7.0                  lifecycle_1.0.1              
## [107] RUnit_0.4.32                  BiocManager_1.30.17          
## [109] jquerylib_0.1.4               data.table_1.14.2            
## [111] bitops_1.0-7                  httpuv_1.6.5                 
## [113] colorRamps_2.3                R6_2.5.1                     
## [115] BiocIO_1.6.0                  latticeExtra_0.6-29          
## [117] bookdown_0.26                 promises_1.2.0.1             
## [119] KernSmooth_2.23-20            gridExtra_2.3                
## [121] codetools_0.2-18              lambda.r_1.2.4               
## [123] dichromat_2.0-0               gtools_3.9.2                 
## [125] assertthat_0.2.1              SummarizedExperiment_1.26.0  
## [127] rjson_0.2.21                  withr_2.5.0                  
## [129] GenomicAlignments_1.32.0      GenomeInfoDbData_1.2.8       
## [131] parallel_4.2.0                hms_1.1.1                    
## [133] grid_4.2.0                    rpart_4.1.16                 
## [135] rmarkdown_2.14                MatrixGenerics_1.8.0         
## [137] biovizBase_1.44.0             Biobase_2.56.0               
## [139] shiny_1.7.1                   base64enc_0.1-3              
## [141] restfulr_0.0.13

References

Allaire, JJ, and François Chollet. 2018. Keras: R Interface to ’Keras’. https://CRAN.R-project.org/package=keras.

Wright, Marvin N., and Andreas Ziegler. 2017. “ranger: A Fast Implementation of Random Forests for High Dimensional Data in C++ and R.” Journal of Statistical Software 77 (1): 1–17. https://doi.org/10.18637/jss.v077.i01.