1 Introduction

The MouseGastrulationData package provides convenient access to the single-cell RNA sequencing (scRNA-seq) datasets from Pijuan-Sala et al. (2019), and additional data generated in similar systems. This study focuses on mouse gastrulation and organogenesis, providing transcriptomic profiles at single-cell resolution across several stages of early development. Datasets are provided as count matrices with additional feature- and sample-level metadata after processing. Raw sequencing data can be acquired from ArrayExpress accession E-MTAB-6967.

2 Installation

The package may be installed from Bioconductor. Bioconductor packages can be accessed using the BiocManager package.

if (!requireNamespace("BiocManager", quietly = TRUE))
    install.packages("BiocManager")
BiocManager::install("MouseGastrulationData")

BiocManager also supports installation of the development version of the package from Github.

BiocManager::install("MarioniLab/MouseGastrulationData")

To use the package, load it in the typical way.

library(MouseGastrulationData)

3 Processing overview

Detailed methods are available in the methods that accompany the paper, or from the code in the corresponding Github repository. Briefly, whole embryos were dissociated at timepoints between embryonic days (E) 6.5 and 8.5 of development. Libraries were generated using the 10x Genomics Chromium platform (v1 chemistry) and sequenced on the Illumina HiSeq 2500. The computational analysis involved a number of steps:

  • Demultiplexing, read alignment and feature quantification was performed with Cellranger using Ensembl 92 genome annotation.
  • Swapped molecules were excluded using the swappedDrops() function from DropletUtils (Griffiths et al. 2018).
  • Cell-containing droplets were called using the emptyDrops() function from DropletUtils (Lun et al. 2019).
  • Called cells with aberrant transcriptional features (e.g., high mitochondrial gene content) were filtered out.
  • Size factors were computed using the computeSumFactors() function from scran (Lun, Bach, and Marioni 2016).
  • Putative doublets were identified and excluded using the doubletCells() function from scran.
  • Cytoplasm-stripped nuclei were also excluded.
  • Batch correction was performed in the principal component space with fastMNN() from scran (Haghverdi et al. 2018).
  • Clusters were identified using a recursive strategy with buildSNNGraph() (from scran) and cluster_louvain (from igraph), and were annotated and merged into interpretable units by hand.

4 Atlas data format

The data accessible via this package is stored in subsets according to the different 10x samples that were generated. For the embryo atlas, the exported object AtlasSampleMetadata provides metadata information for each of the samples. Descriptions of the contents of each column can be accessed using ?AtlasSampleMetadata.

head(AtlasSampleMetadata, n = 3)
##   sample stage pool_index seq_batch ncells
## 1      1  E6.5          1         1    360
## 2      2  E7.5          2         1    356
## 3      3  E7.5          3         1    458

All data access functions allow you to select the particular samples you would like to access. By loading only the samples that you are interested in for your particular analysis, you will save time when downloading and loading the data, and also reduce memory consumption on your machine.

4.1 Processed data access

The package provides the dataset in the form of a SingleCellExperiment object. This section details how you can interact with the object. We load in only one of the samples from the atlas to reduce memory consumption when compiling this vignette.

sce <- EmbryoAtlasData(samples = 21)
sce
## class: SingleCellExperiment 
## dim: 29452 4651 
## metadata(0):
## assays(1): counts
## rownames(29452): ENSMUSG00000051951 ENSMUSG00000089699 ...
##   ENSMUSG00000096730 ENSMUSG00000095742
## rowData names(2): ENSEMBL SYMBOL
## colnames(4651): cell_52466 cell_52467 ... cell_57115 cell_57116
## colData names(16): cell barcode ... celltype colour
## reducedDimNames(2): pca.corrected umap
## spikeNames(0):
## altExpNames(0):

We use the counts() function to retrieve the count matrix. These are stored as a sparse matrix, as implemented in the Matrix package.

counts(sce)[6:9, 1:3]
## 4 x 3 sparse Matrix of class "dgTMatrix"
##                    cell_52466 cell_52467 cell_52468
## ENSMUSG00000104328          .          .          .
## ENSMUSG00000033845          6          8         10
## ENSMUSG00000025903          .          .          .
## ENSMUSG00000104217          .          .          .

Size factors for normalisation are present in the object and are accessed with the sizeFactors() function.

head(sizeFactors(sce))
## [1] 0.8845695 1.4688375 1.2512019 0.8287969 1.3668086 0.9247460

After running scater’s normalize function on the SingleCellExperiment object, normalised or log-transformed counts can be accessed using normcounts and logcounts. These are not demonstrated in this vignette to avoid a dependency on scater.

The MGI symbol and Ensembl gene ID for each gene is stored in the rowData of the SingleCellExperiment object.

head(rowData(sce))
## DataFrame with 6 rows and 2 columns
##                               ENSEMBL      SYMBOL
##                           <character> <character>
## ENSMUSG00000051951 ENSMUSG00000051951        Xkr4
## ENSMUSG00000089699 ENSMUSG00000089699      Gm1992
## ENSMUSG00000102343 ENSMUSG00000102343     Gm37381
## ENSMUSG00000025900 ENSMUSG00000025900         Rp1
## ENSMUSG00000025902 ENSMUSG00000025902       Sox17
## ENSMUSG00000104328 ENSMUSG00000104328     Gm37323

The colData contains cell-specific attributes. The meaning of each field is detailed in the function documentation (?EmbryoAtlasData).

head(colData(sce))
## DataFrame with 6 rows and 16 columns
##                   cell        barcode    sample      pool              stage
##            <character>    <character> <integer> <integer>        <character>
## cell_52466  cell_52466 AAACATACACGGAG        21        17 mixed_gastrulation
## cell_52467  cell_52467 AAACATACCCAACA        21        17 mixed_gastrulation
## cell_52468  cell_52468 AAACATACTTGCGA        21        17 mixed_gastrulation
## cell_52469  cell_52469 AAACATTGATCGGT        21        17 mixed_gastrulation
## cell_52470  cell_52470 AAACATTGCTTATC        21        17 mixed_gastrulation
## cell_52471  cell_52471 AAACATTGGTTCGA        21        17 mixed_gastrulation
##            sequencing.batch     theiler       doub.density   doublet
##                   <integer> <character>          <numeric> <logical>
## cell_52466                2      TS9-10 0.0315539094479002     FALSE
## cell_52467                2      TS9-10    0.1362418810328     FALSE
## cell_52468                2      TS9-10  0.746897566083627     FALSE
## cell_52469                2      TS9-10  0.270453175239345     FALSE
## cell_52470                2      TS9-10  0.222603910205652     FALSE
## cell_52471                2      TS9-10  0.326151882589801     FALSE
##              cluster cluster.sub cluster.stage cluster.theiler  stripped
##            <integer>   <integer>     <integer>       <integer> <logical>
## cell_52466        14           2             5               5     FALSE
## cell_52467         3           6            12              12     FALSE
## cell_52468         2           3             3               3     FALSE
## cell_52469         1           3             1               1     FALSE
## cell_52470        19           1             5               5     FALSE
## cell_52471         5           1             4               4     FALSE
##                                  celltype      colour
##                               <character> <character>
## cell_52466            Blood progenitors 2      c9a997
## cell_52467                   ExE ectoderm      989898
## cell_52468                       Epiblast      635547
## cell_52469           Rostral neurectoderm      65A83E
## cell_52470 Haematoendothelial progenitors      FBBE92
## cell_52471               Nascent mesoderm      C594BF

Batch-corrected PCA representations of the data are available via the reducedDim function, in the pca.corrected slot. This representation contains NA values for cells that are doublets, or cytoplasm-stripped nuclei.

A vector of celltype colours (as used in the paper) is also provided in the exported object EmbryoCelltypeColours. Its use is shown below.

#exclude technical artefacts
singlets <- which(!(colData(sce)$doublet | colData(sce)$stripped))
plot(
    x = reducedDim(sce, "umap")[singlets, 1],
    y = reducedDim(sce, "umap")[singlets, 2],
    col = EmbryoCelltypeColours[colData(sce)$celltype[singlets]],
    pch = 19,
    xaxt = "n", yaxt = "n",
    xlab = "UMAP1", ylab = "UMAP2"
)

4.2 Raw data access

Unfiltered count matrices are also available from MouseGastrulationData. This refers to count matrices where swapped molecules have been removed but no cells have been called. They can be obtained using the EmbryoAtlasData() function and are returned as SingleCellExperiment objects.

unfilt <- EmbryoAtlasData(type="raw", samples=c(1:2))
sapply(unfilt, dim)
##           1      2
## [1,]  29452  29452
## [2,] 117107 107802

These unfiltered matrices may be useful if you want to perform tests of cell-calling analyses, or analyses which use the ambient pool of RNA in 10x samples. Note that empty columns are excluded from these matrices.

5 Chimera data information

5.1 Background

Data from experiments involving chimeric embryos in Pijuan-Sala et al. (2019) are also available from this package. In these embryos, a population of fluorescent embryonic stem cells were injected into wild-type E3.5 mouse embryos. The embryos were then returned to a parent mouse, and allowed to develop normally until collection. The cells were flow-sorted to purify host and injected populations, libraries were generated using 10x version 2 chemistry and sequencing was performed on the HiSeq 4000.

Chimeras are especially effective for studying the effect of knockouts of essential developmental genes. We inject stem cells that possess a knockout of a particular gene, and allow the resulting chimeric embryo to develop. Both injected and host cells contribute to the different tissues in the mouse. The presence of the wild-type host cells allows the embryo to compensate and avoid gross developmental failures, while cells with the knockout are also captured, and their aberrant behaviour can be studied.

5.2 Available datasets

The package contains two chimeric datasets:

  • Wild-type chimeras involving ten samples, from five independant embryo pools at two timepoints. The injected wild-type cells differ only in the insertion of the td-Tomato construct. These data are useful for identifying properties of a typical chimera in scRNAseq data. Raw sequencing data are available at E-MTAB-7324. The data can be accessed using the WTChimeraData() function.
  • Tal1 knockout chimeras involving four samples, from one embryo pool at one timepoint. The injected cells in the Tal1 chimeras have are knockouts for the Tal1 gene. They also contain the td-Tomato construct. Raw sequencing data are available at E-MTAB-7325. The data can be accessed using the Tal1ChimeraData() function.

The processed data for each experiment are provided as a SingleCellExperiment, as for the previously described atlas data. However, there are a few small differences:

  • They contain an extra feature for expression of the td-Tomato.
  • Cells derived from the injected cells (and thus are positive for td-Tomato) are marked in the colData field tomato.
  • Information for the proper pairing of samples from the same embryo pools can be found in the colData field pool.

Unfiltered count matrices are also provided for each sample in these datasets.

6 Session Information

sessionInfo()
## R version 3.6.1 (2019-07-05)
## Platform: x86_64-pc-linux-gnu (64-bit)
## Running under: Ubuntu 18.04.3 LTS
## 
## Matrix products: default
## BLAS:   /home/biocbuild/bbs-3.10-bioc/R/lib/libRblas.so
## LAPACK: /home/biocbuild/bbs-3.10-bioc/R/lib/libRlapack.so
## 
## locale:
##  [1] LC_CTYPE=en_US.UTF-8       LC_NUMERIC=C              
##  [3] LC_TIME=en_US.UTF-8        LC_COLLATE=C              
##  [5] LC_MONETARY=en_US.UTF-8    LC_MESSAGES=en_US.UTF-8   
##  [7] LC_PAPER=en_US.UTF-8       LC_NAME=C                 
##  [9] LC_ADDRESS=C               LC_TELEPHONE=C            
## [11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C       
## 
## attached base packages:
## [1] parallel  stats4    stats     graphics  grDevices utils     datasets 
## [8] methods   base     
## 
## other attached packages:
##  [1] MouseGastrulationData_1.0.0 SingleCellExperiment_1.8.0 
##  [3] SummarizedExperiment_1.16.0 DelayedArray_0.12.0        
##  [5] BiocParallel_1.20.0         matrixStats_0.55.0         
##  [7] Biobase_2.46.0              GenomicRanges_1.38.0       
##  [9] GenomeInfoDb_1.22.0         IRanges_2.20.0             
## [11] S4Vectors_0.24.0            BiocGenerics_0.32.0        
## [13] BiocStyle_2.14.0           
## 
## loaded via a namespace (and not attached):
##  [1] Rcpp_1.0.2                    lattice_0.20-38              
##  [3] assertthat_0.2.1              zeallot_0.1.0                
##  [5] digest_0.6.22                 mime_0.7                     
##  [7] BiocFileCache_1.10.0          R6_2.4.0                     
##  [9] backports_1.1.5               RSQLite_2.1.2                
## [11] evaluate_0.14                 httr_1.4.1                   
## [13] pillar_1.4.2                  zlibbioc_1.32.0              
## [15] rlang_0.4.1                   curl_4.2                     
## [17] blob_1.2.0                    Matrix_1.2-17                
## [19] rmarkdown_1.16                AnnotationHub_2.18.0         
## [21] stringr_1.4.0                 RCurl_1.95-4.12              
## [23] bit_1.1-14                    shiny_1.4.0                  
## [25] httpuv_1.5.2                  compiler_3.6.1               
## [27] xfun_0.10                     pkgconfig_2.0.3              
## [29] htmltools_0.4.0               tidyselect_0.2.5             
## [31] tibble_2.1.3                  GenomeInfoDbData_1.2.2       
## [33] interactiveDisplayBase_1.24.0 bookdown_0.14                
## [35] later_1.0.0                   crayon_1.3.4                 
## [37] dplyr_0.8.3                   dbplyr_1.4.2                 
## [39] bitops_1.0-6                  rappdirs_0.3.1               
## [41] grid_3.6.1                    xtable_1.8-4                 
## [43] DBI_1.0.0                     magrittr_1.5                 
## [45] stringi_1.4.3                 XVector_0.26.0               
## [47] promises_1.1.0                vctrs_0.2.0                  
## [49] tools_3.6.1                   bit64_0.9-7                  
## [51] glue_1.3.1                    BiocVersion_3.10.1           
## [53] purrr_0.3.3                   fastmap_1.0.1                
## [55] yaml_2.2.0                    AnnotationDbi_1.48.0         
## [57] BiocManager_1.30.9            ExperimentHub_1.12.0         
## [59] memoise_1.1.0                 knitr_1.25

References

Griffiths, J. A., A. C. Richard, K. Bach, A. T. L. Lun, and J. C. Marioni. 2018. “Detection and removal of barcode swapping in single-cell RNA-seq data.” Nat Commun 9 (1):2667.

Haghverdi, L., A. T. L. Lun, M. D. Morgan, and J. C. Marioni. 2018. “Batch effects in single-cell RNA-sequencing data are corrected by matching mutual nearest neighbors.” Nat. Biotechnol. 36 (5):421–27.

Lun, A. T. L., S. Riesenfeld, T. Andrews, T. P. Dao, T. Gomes, and J. C. Marioni. 2019. “EmptyDrops: distinguishing cells from empty droplets in droplet-based single-cell RNA sequencing data.” Genome Biol. 20 (1):63.

Lun, A. T., K. Bach, and J. C. Marioni. 2016. “Pooling across cells to normalize single-cell RNA sequencing data with many zero counts.” Genome Biol. 17 (April):75.

Pijuan-Sala, Blanca, Jonathan A. Griffiths, Carolina Guibentif, Tom W. Hiscock, Wajid Jawaid, Fernando J. Calero-Nieto, Carla Mulas, et al. 2019. “A Single-Cell Molecular Map of Mouse Gastrulation and Early Organogenesis.” Nature 566 (7745):490–95. https://doi.org/10.1038/s41586-019-0933-9.