%\VignetteIndexEntry{rhdf5}
%\VignetteKeywords{HDF5}
%\VignettePackage{rhdf5}

\documentclass[10pt,a4paper]{article}

<<style, echo=FALSE, results=tex>>=
BiocStyle::latex()
@

\RequirePackage{amsfonts,amsmath,amstext,amssymb,amscd}
\usepackage{graphicx}
%\usepackage{verbatim}
%\usepackage{hyperref}
%\usepackage{color}
%\definecolor{darkblue}{rgb}{0.2,0.0,0.4}

%\topmargin -1.5cm
%\oddsidemargin -0cm   % read Lamport p.163
%\evensidemargin -0cm  % same as oddsidemargin but for left-hand pages
%\textwidth 17cm
%\textheight 24.5cm
%\parindent0em

%\newcommand{\lib}[1]{{\mbox{\normalfont\textsf{#1}}}}
%\newcommand{\file}[1]{{\mbox{\normalfont\textsf{'#1'}}}}
%\newcommand{\R}{{\mbox{\normalfont\textsf{R}}}}
%\newcommand{\Rfunction}[1]{{\mbox{\normalfont\texttt{#1}}}}
%\newcommand{\Robject}[1]{{\mbox{\normalfont\texttt{#1}}}}
%\newcommand{\Rpackage}[1]{{\mbox{\normalfont\textsf{#1}}}}
%\newcommand{\Rclass}[1]{{\mbox{\normalfont\textit{#1}}}}
%\newcommand{\code}[1]{{\mbox{\normalfont\texttt{#1}}}}

%\newcommand{\email}[1]{\mbox{\href{mailto:#1}{\textcolor{darkblue}{\normalfont{#1}}}}}
%\newcommand{\web}[2]{\mbox{\href{#2}{\textcolor{darkblue}{\normalfont{#1}}}}}

\SweaveOpts{keep.source=TRUE,eps=FALSE}

\begin{document}

\title{rhdf5 - HDF5 interface for R}

\author{Bernd Fischer}

\maketitle

\tableofcontents

\section{Introduction}
The package is an R interface for HDF5. On the one hand it implements
\R{}~interfaces to many of the low level functions from the C
interface. On the other hand it provides high level convenience
functions on \R{}~ level to make a usage of HDF5 files more easy.

\section{Installation of the HDF5 package}
To install the package \Biocpkg{rhdf5}, you need a current version
(>2.15.0) of \R{}~(www.r-project.org). After installing \R{}~you can
run the following commands from the \R{}~command shell to install the
bioconductor package \Biocpkg{rhdf5}. 

<<installation,eval=FALSE>>=
source("http://bioconductor.org/biocLite.R")
biocLite("rhdf5")
@

\section{High level \R~-HDF5 functions}
\subsection{Creating an HDF5 file and group hierarchy}
An empty HDF5 file is created by
<<createHDF5file>>=
library(rhdf5)
h5createFile("myhdf5file.h5")
@

The HDF5 file can contain a group hierarchy. We create a number of
groups and list the file content afterwards.
<<create groups>>=
h5createGroup("myhdf5file.h5","foo")
h5createGroup("myhdf5file.h5","baa")
h5createGroup("myhdf5file.h5","foo/foobaa")
h5ls("myhdf5file.h5")
@

\subsection{Writing and reading objects}
\label{sec_writeMatrix}

Objects can be written to the HDF5 file. Attributes attached to an
object are written as well, if \Robject{write.attributes=TRUE} is
given as argument to \Robject{h5write}. Note that not all
\R{}-attributes can be written as HDF5 attributes.

<<writeMatrix>>=
A = matrix(1:10,nr=5,nc=2)
h5write(A, "myhdf5file.h5","foo/A")
B = array(seq(0.1,2.0,by=0.1),dim=c(5,2,2))
attr(B, "scale") <- "liter"
h5write(B, "myhdf5file.h5","foo/B")
C = matrix(paste(LETTERS[1:10],LETTERS[11:20], collapse=""),
  nr=2,nc=5)
h5write(C, "myhdf5file.h5","foo/foobaa/C")
df = data.frame(1L:5L,seq(0,1,length.out=5),
  c("ab","cde","fghi","a","s"), stringsAsFactors=FALSE)
h5write(df, "myhdf5file.h5","df")
h5ls("myhdf5file.h5")
D = h5read("myhdf5file.h5","foo/A")
E = h5read("myhdf5file.h5","foo/B")
F = h5read("myhdf5file.h5","foo/foobaa/C")
G = h5read("myhdf5file.h5","df")
@ 

If a dataset with the given \Robject{name} does not yet exist, a
dataset is created in the HDF5 file and the object \Robject{obj} is
written to the HDF5 file. If a dataset with the given \Robject{name}
already exists and the datatype and the dimensions are the same as for
the object \Robject{obj}, the data in the file is overwritten. If the
dataset already exists and either the datatype or the dimensions are
different, \Rfunction{h5write} fails.

\subsection{Writing and reading with subsetting, chunking and compression}
The \Biocpkg{rhdf5} package provides two ways of subsetting. One can
specify the submatrix with the \R{}-style index lists or with the HDF5
style hyperslabs. Note, that the two next examples below show two
alternative ways for reading and writing the exact same
submatrices. Before writing subsetting or hyperslabbing, the dataset
with full dimensions has to be created in the HDF5 file. This can be
achieved by writing once an array with full dimensions as in Section
\ref{sec_writeMatrix} or by creating a dataset. Afterwards the dataset
can be written sequentially. 

\paragraph{Influence of chunk size and compression level} The chosen
chunk size and compression level have a strong impact on the reading
and writing time as well as on the resulting file size. In an example
an integer vector of size 10e7is written to an HDF5 file. The file is
written in subvectors of size 10'000. The definition of the chunk size
influences the reading as well as the writing time. In the chunk size
is much smaller or much larger than actually used, the runtime
performance decreases dramatically. Furthermore the file size is
larger for smaller chunk sizes, because of an overhead. The
compression can be much more efficient when the chunk size is very
large. The following figure illustrates the runtime and file size
behaviour as a function of the chunk size for a small toy dataset. 


\begin{center}
  \includegraphics[width=0.75\textwidth]{../inst/demoChunkSize/chunksize.pdf}
\end{center}

After the creation of the dataset, the data can be written
sequentially to the HDF5 file. Subsetting in \R{}-style needs the
specification of the argument index to \Rfunction{h5read} and 
\Rfunction{h5write}.
<<writeMatrixSubsetting>>=
h5createDataset("myhdf5file.h5", "foo/S", c(5,8), 
                storage.mode = "integer", chunk=c(5,1), level=7)
h5write(matrix(1:5,nr=5,nc=1), file="myhdf5file.h5", 
        name="foo/S", index=list(NULL,1))
h5read("myhdf5file.h5", "foo/S")
h5write(6:10, file="myhdf5file.h5",
        name="foo/S", index=list(1,2:6))
h5read("myhdf5file.h5", "foo/S")
h5write(matrix(11:40,nr=5,nc=6), file="myhdf5file.h5", 
        name="foo/S", index=list(1:5,3:8))
h5read("myhdf5file.h5", "foo/S")
h5write(matrix(141:144,nr=2,nc=2), file="myhdf5file.h5", 
        name="foo/S", index=list(3:4,1:2))
h5read("myhdf5file.h5", "foo/S")
h5write(matrix(151:154,nr=2,nc=2), file="myhdf5file.h5", 
        name="foo/S", index=list(2:3,c(3,6)))
h5read("myhdf5file.h5", "foo/S")
h5read("myhdf5file.h5", "foo/S", index=list(2:3,2:3))
h5read("myhdf5file.h5", "foo/S", index=list(2:3,c(2,4)))
h5read("myhdf5file.h5", "foo/S", index=list(2:3,c(1,2,4,5)))
@ 

The HDF5 hyperslabs are defined by some of the arguments
\Robject{start}, \Robject{stride}, \Robject{count}, and
\Robject{block}. These arguments are not effective, if the argument
\Robject{index} is specified.
<<writeMatrixHyperslab>>=
h5createDataset("myhdf5file.h5", "foo/H", c(5,8), storage.mode = "integer",
                chunk=c(5,1), level=7)
h5write(matrix(1:5,nr=5,nc=1), file="myhdf5file.h5", name="foo/H", 
        start=c(1,1))
h5read("myhdf5file.h5", "foo/H")
h5write(6:10, file="myhdf5file.h5", name="foo/H",
        start=c(1,2), count=c(1,5))
h5read("myhdf5file.h5", "foo/H")
h5write(matrix(11:40,nr=5,nc=6), file="myhdf5file.h5", name="foo/H", 
        start=c(1,3))
h5read("myhdf5file.h5", "foo/H")
h5write(matrix(141:144,nr=2,nc=2), file="myhdf5file.h5", name="foo/H", 
        start=c(3,1))
h5read("myhdf5file.h5", "foo/H")
h5write(matrix(151:154,nr=2,nc=2), file="myhdf5file.h5", name="foo/H",
        start=c(2,3), stride=c(1,3))
h5read("myhdf5file.h5", "foo/H")
h5read("myhdf5file.h5", "foo/H", 
       start=c(2,2), count=c(2,2))
h5read("myhdf5file.h5", "foo/H", 
       start=c(2,2), stride=c(1,2),count=c(2,2))
h5read("myhdf5file.h5", "foo/H", 
       start=c(2,1), stride=c(1,3),count=c(2,2), block=c(1,2))
@ 

\subsection{Saving multiple objects to an HDF5 file (h5save)}

A number of objects can be written to the top level group of an HDF5
file with the function \Rfunction{h5save} (as analogonanalogous to the
\R{}~function \Rfunction{save}).
<<h5save>>=
A = 1:7;  B = 1:18; D = seq(0,1,by=0.1)
h5save(A, B, D, file="newfile2.h5")
h5dump("newfile2.h5")
@

\subsection{List the content of an HDF5 file}

The function \Rfunction{h5ls} provides some ways of viewing the content of an HDF5 file.

<<h5ls>>=
h5ls("myhdf5file.h5")
h5ls("myhdf5file.h5", all=TRUE)
h5ls("myhdf5file.h5", recursive=2)
@ 

\subsection{Dump the content of an HDF5 file}
The function \Rfunction{h5dump} is similar to the function \Rfunction{h5ls}. If
used with the argument \Robject{load=FALSE}, it produces the same result
as \Rfunction{h5ls}, but with the group structure resolved as a hierarchy
of lists. If the default argument \Robject{load=TRUE} is used all
datasets from the HDF5 file are read.

<<h5dump>>=
h5dump("myhdf5file.h5",load=FALSE)
D <- h5dump("myhdf5file.h5")
@ 

\subsection{Reading HDF5 files with external software}
The content of the HDF5 file can be checked with the command line tool
\software{h5dump} (available on linux-like systems with the HDF5 tools
package installed) or with the graphical user interface \software{HDFView}
(http://www.hdfgroup.org/hdf-java-html/hdfview/) available for all
major platforms. 
<<h5dump, eval=FALSE>>=
system("h5dump myhdf5file.h5")
@ 
\warning{Please note, that arrays appear as transposed matrices when opening it
with a C-program (\software{h5dump} or \software{HDFView}). This is due to the fact the
fastest changing dimension on C is the last one, but on \R~ it is the
first one (as in Fortran).}

\section{64-bit integers}
\R{} does not support a native datatype for 64-bit integers. All integers in \R{} are
32-bit integers. When reading 64-bit integers from a HDF5-file, you
may run into troubles. \Biocpkg{rhdf5} is able to deal with 64-bit integers, but
you still should pay attention.

As an example, we create an HDF5 file that contains 64-bit integers.

<<bit64integer1>>=
x = h5createFile("newfile3.h5")

D = array(1L:30L,dim=c(3,5,2))
d = h5createDataset(file="newfile3.h5", dataset="D64", dims=c(3,5,2),H5type="H5T_NATIVE_INT64")
h5write(D,file="newfile3.h5",name="D64")
@

There are three different ways of reading 64-bit integers in
\R{}. \Rfunction{H5Dread} and \Rfunction{h5read} have the argument
\Robject{bit64conversion} the specify the conversion method.

By setting {\bf \Robject{bit64conversion='int'}}, a coercing to 32-bit
integers is enforced, with the risc of data loss, but with the
insurance that numbers are represented as native integers.

<<bit64integer2>>=
D64a = h5read(file="newfile3.h5",name="D64",bit64conversion="int")
D64a
storage.mode(D64a)
@

{\bf \Robject{bit64conversion='double'}} coerces the 64-bit integers to floating
point numbers. doubles can represent integers with up to 54-bits, but
they are not represented as integer values anymore. For larger numbers
there is still a data loss.

<<bit64integer3>>=
D64b = h5read(file="newfile3.h5",name="D64",bit64conversion="double")
D64b
storage.mode(D64b)
@

{\bf \Robject{bit64conversion='bit64'}} is recommended way of coercing. It
represents the 64-bit integers as objects of class \Rclass{integer64} as
defined in the package \CRANpkg{bit64}. Make sure that you have installed
\CRANpkg{bit64}. \warning{The datatype \Rclass{integer64} is not part of base \R{}, but defined
in an external package. This can produce unexpected behaviour when
working with the data.} When choosing this option the package \CRANpkg{bit64}
will be loaded.

<<bit64integer4>>=
D64c = h5read(file="newfile3.h5",name="D64",bit64conversion="bit64")
D64c
class(D64c)
@

\section{Low level HDF5 functions}
\subsection{Creating an HDF5 file and a group hierarchy}

Create a file.
<<createfile,quiet=FALSE>>=
library(rhdf5)
h5file = H5Fcreate("newfile.h5")
h5file
@ 

and a group hierarchy
<<createfile,quiet=FALSE>>=
h5group1 <- H5Gcreate(h5file, "foo")
h5group2 <- H5Gcreate(h5file, "baa")
h5group3 <- H5Gcreate(h5group1, "foobaa")
h5group3
@ 

\subsection{Writing data to an HDF5 file}

Create 4 different simple and scalar data spaces. The data space sets the dimensions for the datasets.

<<createdataspace,quiet=FALSE>>=
d = c(5,7)
h5space1 = H5Screate_simple(d,d)
h5space2 = H5Screate_simple(d,NULL)
h5space3 = H5Scopy(h5space1)
h5space4 = H5Screate("H5S_SCALAR")
h5space1
H5Sis_simple(h5space1)
@ 

Create two datasets, one with integer and one with floating point numbers. 

<<create dataset>>=
h5dataset1 = H5Dcreate( h5file, "dataset1", "H5T_IEEE_F32LE", h5space1 )
h5dataset2 = H5Dcreate( h5group2, "dataset2", "H5T_STD_I32LE", h5space1 )
h5dataset1
@ 

Now lets write data to the datasets.
<<writedata>>=
A = seq(0.1,3.5,length.out=5*7)
H5Dwrite(h5dataset1, A)
B = 1:35
H5Dwrite(h5dataset2, B)
@ 

To release resources and to ensure that the data is written on disk,
we have to close datasets, dataspaces, and the file. There are
different functions to close datasets, dataspaces, groups, and files.
<<closefile>>=
H5Dclose(h5dataset1)
H5Dclose(h5dataset2)

H5Sclose(h5space1)
H5Sclose(h5space2)
H5Sclose(h5space3)
H5Sclose(h5space4)

H5Gclose(h5group1)
H5Gclose(h5group2)
H5Gclose(h5group3)

H5Fclose(h5file)
@


% We can now check how it looks like on disk.
% <<h5dump>>=
% system("h5dump newfile2.h5")
% @ 
% Please note, that arrays appear as transposed matrices when opening it with a C-program (h5dump). This is due to the fact the fastest changing dimension on C is the last one, but on \R~ it is the first one (as in Fortran).


\section{Session Info}
<<sessioninfo, results=tex, print=TRUE>>=
toLatex(sessionInfo())
@

\end{document}